HM2P07PDW145N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDW145N9 is a 132-position backplane connector header manufactured by Amphenol ICC (FCI) within the Millipacs® series. This through-hole press-fit connector is designed for CompactPCI P4 applications with a 2.00mm pitch and supports 1.5A current at 750Vrms. The main part is classified as obsolete, making identification of active equivalent components essential for ongoing system support and new design implementations.

Substiute Parts

HM2P07PDW145N9

Amphenol ICC (FCI)In Stock: 1045HM2P07PDW145N9 Datasheet

Current PartRFQ

HM2P07PDW145N9LF

Amphenol ICC (FCI)In Stock: 1019HM2P07PDW145N9LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDW145N9 is determined by strict equivalence across the following critical parameters:

• Connector type and style (Header, Male Pins, Style A 22)
• Position count and configuration (132 positions with 110 + 22 ground arrangement)
• Pitch specification (0.079" / 2.00mm)
• Row configuration (5 + 1)
• Electrical ratings (1.5A current, 750Vrms voltage)
• Operating temperature range (-55°C to 125°C)
• Mounting and termination method (Through Hole, Press-Fit)
• Contact finish specification (Gold, Flash thickness)

The HM2P07PDW145N9LF qualifies as a direct substitute based on complete alignment with all specified parameters. The primary distinction is product status transition from obsolete to active, along with updated compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The HM2P07PDW145N9LF is the direct functional equivalent for the obsolete HM2P07PDW145N9. Selection between these parts should be based on regulatory and compliance requirements:

For applications requiring RoHS compliance, the HM2P07PDW145N9LF is the appropriate choice. This part maintains full electrical and mechanical compatibility while meeting current environmental regulations.

For legacy systems or applications where RoHS compliance is not mandated, the HM2P07PDW145N9 remains functionally equivalent, though its obsolete status may impact long-term availability.

The HM2P07PDW145N9LF is recommended for new designs and ongoing production due to its active product status and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Are HM2P07PDW145N9 and HM2P07PDW145N9LF mechanically interchangeable?

A: Yes. Both parts share identical connector geometry, pitch, position count, row configuration, and mounting specifications. They are direct mechanical substitutes.

Q: What is the difference between these two part numbers?

A: The primary differences are product status (obsolete vs. active), RoHS compliance (non-compliant vs. compliant), REACH status classification, and packaging format (bulk vs. tray). Electrical and mechanical specifications are identical.

Q: Can I use HM2P07PDW145N9LF in place of HM2P07PDW145N9?

A: Yes, for applications where RoHS compliance is acceptable or required. The HM2P07PDW145N9LF provides identical electrical performance and mechanical fit.

Q: Why does the HM2P07PDW145N9 show as obsolete?

A: The HM2P07PDW145N9 has been superseded by the HM2P07PDW145N9LF, which incorporates RoHS compliance and updated regulatory certifications.

Q: Are there packaging considerations when switching between these parts?

A: Yes. The HM2P07PDW145N9 is supplied in bulk packaging, while the HM2P07PDW145N9LF is supplied in tray packaging. Verify that your assembly process accommodates the tray format.

Q: What is the current inventory status?

A: HM2P07PDW145N9 has 1033 pieces in stock (obsolete status). HM2P07PDW145N9LF has 978 pieces in stock (active status).