HM2P07PDT231N9LF Equivalent & Substitute Parts

Part Overview

The HM2P07PDT231N9LF is a 154-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole press-fit connector features a 2.00mm pitch and supports 1.5A current rating at 750Vrms, with operating temperature range of -55°C to 125°C. The connector comprises 110 signal positions plus 44 ground positions across 5 rows plus 2 ground rows, with gold contact finish and board guide features. As an active product with RoHS compliance and unlimited moisture sensitivity rating, substitute parts are identified for applications requiring alternative configurations or availability optimization.

Substiute Parts

HM2P07PDT231N9LF

Amphenol ICC (FCI)In Stock: 827HM2P07PDT231N9LF Datasheet

Current PartRFQ

17011101201

HARTINGIn Stock: 102317011101201 Datasheet

MFR RecommendedRFQ

17011102201

HARTINGIn Stock: 193117011102201 Datasheet

MFR RecommendedRFQ

17011102204

HARTINGIn Stock: 105717011102204 Datasheet

MFR RecommendedRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HM2P07PDT231N9LF are qualified based on the following electrical and mechanical parameters:

Core Substitution Criteria:

• Connector Type: Header, Male Pins
• Connector Style: A 22
• Pitch: 0.079" (2.00mm)
• Mounting Type: Through Hole
• Termination: Press-Fit
• Operating Temperature Range: -55°C to 125°C
• RoHS Compliance Status: Active compliance certification
• MSL Rating: 1 (Unlimited)
• ECCN Classification: EAR99
• HTSUS Code: 8536.69.4040

The identified substitute parts are HARTING har-bus® HM series connectors (17011101201, 17011102201, 17011102204, 17011102402). These parts maintain compatibility through matching pitch, mounting method, termination technology, and temperature operating range. All substitutes are active products with current RoHS3 compliance certification and unlimited moisture sensitivity rating.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain active product status with current RoHS3 compliance certification. The HARTING har-bus® HM series connectors (17011101201, 17011102201, 17011102204, 17011102402) are electrically and mechanically compatible with the HM2P07PDT231N9LF across core operating parameters including pitch, mounting method, termination technology, and temperature range.

Key considerations for part selection:

Position Configuration: The HM2P07PDT231N9LF provides 154 total positions (110 signal + 44 ground). Substitute parts provide 110 positions without integrated ground rows. Applications requiring the full 154-position configuration with dedicated ground rows must evaluate circuit board layout compatibility.

Current Rating: The main part supports 1.5A per contact. Substitute parts support 1.0A per contact. Applications with current requirements exceeding 1.0A per contact require design review.

Contact Finish: The main part specifies gold flash finish. Substitute parts offer gold or gold-palladium finish options. Both finishes meet the specified operating temperature and voltage requirements.

Board Guide Feature: Parts 17011102201 and 17011102402 include board guide features matching the main part. Parts 17011101201 and 17011102204 do not specify board guide features.

Regulatory Compliance: All parts maintain EAR99 export classification and 8536.69.4040 HTSUS code. The main part carries REACH Affected status; substitute parts carry REACH Unaffected status.

Frequently Asked Questions (FAQ)

Q: Can HARTING har-bus® HM series connectors directly replace the Amphenol ICC HM2P07PDT231N9LF?

A: Direct replacement depends on application requirements. All substitute parts match the core electrical and mechanical parameters (2.00mm pitch, through-hole press-fit termination, -55°C to 125°C operating range). However, the main part provides 154 positions with integrated ground rows, while substitutes provide 110 positions. Circuit board layout and connector footprint compatibility must be evaluated.

Q: What is the difference between the four HARTING substitute parts?

A: All four HARTING parts (17011101201, 17011102201, 17011102204, 17011102402) are 110-position headers with identical electrical specifications. The primary differences are board guide feature availability (17011102201 and 17011102402 include board guides; 17011101201 and 17011102204 do not) and packaging format (all supplied in tubes). Inventory availability varies across parts.

Q: Are there current rating limitations when using substitute parts?

A: Yes. The main part supports 1.5A per contact. All HARTING substitute parts support 1.0A per contact. Applications designed for 1.5A operation require design modification or alternative parts if current requirements cannot be reduced to 1.0A per contact.

Q: Does the contact finish difference affect compatibility?

A: Both gold flash (main part) and gold or gold-palladium (substitute parts) finishes meet the specified operating temperature (−55°C to 125°C) and voltage rating (750Vrms). Contact finish selection is determined by application-specific corrosion resistance and signal integrity requirements.

Q: What packaging format is supplied for substitute parts?

A: All HARTING substitute parts are supplied in tube packaging. The main part is supplied in tray packaging. Tube packaging accommodates automated assembly processes and differs from tray format in handling and storage requirements.

Q: Are substitute parts RoHS compliant?

A: Yes. All substitute parts carry ROHS3 compliance certification. The main part carries RoHS compliance certification. Both certifications meet current regulatory requirements for restricted substance elimination.