HM2P07PDP2T0N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDP2T0N9 is a 154-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole press-fit connector features a 2.00mm pitch and supports 1.5A current at 750Vrms. The part is classified as obsolete, necessitating identification of active equivalent alternatives for new designs and ongoing production requirements.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	154 (110 + 44 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 2
Mounting Type	Through Hole
Termination	Press-Fit
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C ~ 125°C
Contact Finish	Gold (Flash)
Features	Board Guide

Substitute Part Grouping Explanation

Substitution logic is based on the following critical parameters: connector type (header, male pins), pitch (2.00mm), mounting method (through-hole press-fit), termination style (press-fit), operating temperature range (-55°C ~ 125°C), contact finish (gold), and presence of board guide feature.

The HM2P07PDP2T0N9 contains 154 total positions (110 signal + 44 ground). Direct substitutes maintain this exact position count and configuration. Alternative substitutes with 110 positions (signal only) represent functional equivalents for applications where the ground pin distribution differs or where the full 154-position configuration is not required.

Substitutes are grouped into two categories:

Category 1: Direct Equivalents (154 Positions)

HM2P07PDP2T0N9LF (Amphenol ICC) — Active status, RoHS compliant, tray packaging

Category 2: Functional Equivalents (110 Positions)

1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1 (TE Connectivity Z-PACK series)
17011102204, 17011102402, 17011104201 (HARTING har-bus® HM series)

Parameter Comparison

Parameter	HM2P07PDP2T0N9	HM2P07PDP2T0N9LF	1-5100143-9	1-5188398-9	17011102402	3-5100143-0	5100143-1
Manufacturer	Amphenol ICC	Amphenol ICC	TE Connectivity	TE Connectivity	HARTING	TE Connectivity	TE Connectivity
Positions	154	154	110	110	110	110	110
Pitch (mm)	2.00	2.00	2.00	2.00	2.00	2.00	2.00
Rows	5 + 2	5 + 2	5	5	5	5	5
Mounting	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit
Current Rating (A)	1.5	1.5	1.5	1.5	1.0	1.5	1.5
Voltage Rating	750Vrms	750Vrms	500Vrms	500Vrms	—	500Vrms	500Vrms
Operating Temp	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Contact Finish	Gold (Flash)	Gold (Flash)	Gold	Gold (30.0µin)	Gold or Gold-Palladium	Gold (30.0µin)	Gold (30.0µin)
Product Status	Obsolete	Active	Active	Active	Active	Active	Active
RoHS Status	Non-compliant	Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Compliant	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (154-Position Requirement): Select HM2P07PDP2T0N9LF. This part maintains identical position count, pitch, and electrical ratings as the original HM2P07PDP2T0N9 while offering active product status and RoHS3 compliance. Packaging is supplied in trays.

For 110-Position Applications: TE Connectivity Z-PACK series (5100143-1, 1-5188398-9, 3-5100143-0, 1-5100143-9) and HARTING har-bus® HM series (17011102402, 17011102204, 17011104201) are functionally equivalent alternatives. All maintain 2.00mm pitch, through-hole press-fit termination, and -55°C ~ 125°C operating range.

TE Connectivity parts offer 1.5A current rating and 500Vrms voltage rating with ROHS3 compliance. HARTING parts provide 1.0A current rating with ROHS3 compliance. Contact finish specifications vary between manufacturers but all use gold or gold-palladium plating suitable for press-fit applications.

Selection between manufacturers should account for: current and voltage requirements of the application, compliance certifications required (REACH status varies), and packaging format preferences (tube or tray).

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDP2T0N9LF be used as a direct replacement for HM2P07PDP2T0N9? A: Yes. Both parts share identical electrical and mechanical specifications: 154 positions, 2.00mm pitch, 1.5A current rating, 750Vrms voltage rating, and -55°C ~ 125°C operating temperature. The primary difference is product status (active vs. obsolete) and RoHS compliance. HM2P07PDP2T0N9LF is supplied in tray packaging.

Q: What is the difference between 154-position and 110-position substitutes? A: The original HM2P07PDP2T0N9 contains 154 total positions (110 signal + 44 ground). 110-position alternatives contain signal positions only and do not include the dedicated ground pin rows. These are suitable for applications where the ground distribution architecture differs or where full 154-position capacity is not required.

Q: Are TE Connectivity and HARTING parts interchangeable? A: Both manufacturers provide 110-position headers with 2.00mm pitch and through-hole press-fit termination. Key differences exist in current rating (TE: 1.5A, HARTING: 1.0A) and voltage rating specification (TE: 500Vrms, HARTING: not specified). Selection depends on application current and voltage requirements.

Q: What packaging options are available? A: HM2P07PDP2T0N9LF is supplied in trays. TE Connectivity and HARTING alternatives are supplied in tubes. Packaging selection affects handling, storage, and automated assembly compatibility.

Q: Are all substitute parts RoHS compliant? A: HM2P07PDP2T0N9LF and all TE Connectivity and HARTING alternatives listed are ROHS3 compliant. The original HM2P07PDP2T0N9 is RoHS non-compliant.

Q: What is the contact finish specification for each substitute? A: HM2P07PDP2T0N9LF uses gold flash finish. TE Connectivity parts specify 30.0µin (0.76µm) gold plating. HARTING parts specify gold or gold-palladium finish. All finishes are suitable for press-fit termination.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message