HM2P07PDP2F5N9LF Equivalent & Substitute Parts

Part Overview

The HM2P07PDP2F5N9LF is a 132-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole press-fit connector features 110 signal positions plus 22 ground positions arranged in 5 rows plus 1 ground row, with 2.00mm pitch and gold-plated contacts. The part is currently active and RoHS compliant. Substitute parts are necessary when the original part becomes unavailable, when alternative sourcing is required for cost optimization, or when design flexibility demands equivalent connector options from different manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Manufacturer Part Number	HM2P07PDP2F5N9LF
Manufacturer	Amphenol ICC (FCI)
Category	Backplane Connectors
Connector Type	Header, Male Pins
Number of Positions	132 (110 + 22 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 1
Mounting Type	Through Hole
Termination	Press-Fit
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C ~ 125°C
Contact Finish	Gold
RoHS Status	RoHS Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDP2F5N9LF is determined by the following critical parameters: connector pitch (2.00mm), mounting type (through-hole press-fit), connector style (male pins header), operating temperature range (-55°C ~ 125°C), and RoHS compliance status. The substitute parts are grouped into two categories based on position count:

Category A: 110-Position Equivalents — Parts 17011102204 (HARTING har-bus® HM), 5100143-1 (TE Connectivity Z-PACK), and 5106164-1 (TE Connectivity Z-PACK) provide direct functional equivalence with 110 signal positions and 5 rows. These parts maintain the same pitch, mounting method, and termination type. They are suitable for applications where the 22 dedicated ground positions in the original part can be accommodated through alternative grounding schemes or where the reduced position count aligns with circuit requirements.

Category B: 154-Position Alternative — Part PCN21B-110PB-2PF-G (Hirose Electric PCN21 series) offers 154 total positions (110 signal + 44 ground) with 5 rows plus 2 ground rows. This part maintains pitch and press-fit termination but features an expanded ground architecture. This part carries Obsolete product status and should be evaluated for long-term availability constraints.

Parameter Comparison

Parameter	HM2P07PDP2F5N9LF (Main)	17011102204 (HARTING)	5100143-1 (TE)	5106164-1 (TE)	PCN21B-110PB-2PF-G (Hirose)
Manufacturer	Amphenol ICC (FCI)	HARTING	TE Connectivity	TE Connectivity	Hirose Electric
Number of Positions	132 (110 + 22)	110	110	110	154 (110 + 44)
Number of Rows	5 + 1	5	5	5	5 + 2
Pitch	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)
Connector Type	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit
Current Rating	1.5 A	1 A	1.5 A	1.5 A	1.5 A
Voltage Rating	750Vrms	—	500Vrms	500Vrms	300V
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Contact Finish	Gold	Gold or Gold-Palladium	Gold	Gold	Gold
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Product Status	Active	Active	Active	Active	Obsolete

Engineering Selection Recommendations

For 110-Position Applications: Parts 5100143-1 and 5106164-1 from TE Connectivity are preferred substitutes when the application requires 110 signal positions. Both maintain the full 1.5 A current rating and are ROHS3 compliant with active product status. Part 5106164-1 includes an alignment strip feature in addition to the board guide. Part 17011102204 from HARTING is a viable alternative with active status and ROHS3 compliance, though it carries a reduced current rating of 1 A, which may limit suitability for higher-current applications.

For 154-Position Applications: Part PCN21B-110PB-2PF-G provides expanded grounding architecture with 44 dedicated ground positions. However, this part carries Obsolete product status, indicating limited future availability. Selection of this part should be accompanied by long-term supply chain assessment and consideration of active alternatives.

Compliance Considerations: All substitute parts maintain the required operating temperature range of -55°C ~ 125°C and RoHS compliance status. The TE Connectivity parts (5100143-1, 5106164-1) and HARTING part (17011102204) are ROHS3 compliant, representing the latest regulatory standard. Voltage rating differences should be evaluated against circuit requirements; the main part and TE Connectivity substitutes support higher voltage ratings than the Hirose alternative.

Frequently Asked Questions (FAQ)

Q: Can 110-position substitutes be used in place of the 132-position HM2P07PDP2F5N9LF?

A: Yes, provided the application circuit design accommodates the reduced position count. The 110-position parts (17011102204, 5100143-1, 5106164-1) maintain identical pitch, mounting type, and press-fit termination. The primary difference is the absence of the dedicated 22-position ground row; alternative grounding methods must be implemented in the PCB design.

Q: What is the significance of the current rating difference between 17011102204 (1 A) and the main part (1.5 A)?

A: The HARTING part 17011102204 supports a maximum continuous current of 1 A per contact, compared to 1.5 A for the main part and TE Connectivity substitutes. Applications requiring current levels between 1 A and 1.5 A per contact should use TE Connectivity parts 5100143-1 or 5106164-1 instead.

Q: Are there mechanical compatibility issues between the main part and 110-position substitutes?

A: No mechanical incompatibility exists for the 110-position substitutes. All parts share 2.00mm pitch, through-hole mounting, and press-fit termination. PCB footprints designed for the main part will accommodate the 110-position alternatives, though the reduced row count (5 rows instead of 5 + 1) must be reflected in the circuit layout.

Q: Why is PCN21B-110PB-2PF-G marked as Obsolete?

A: Obsolete status indicates the manufacturer has discontinued active production and support for this part. While inventory may remain available from distributors, long-term supply cannot be guaranteed. This part should be selected only when its specific 154-position, dual ground-row architecture is required and alternative active parts cannot satisfy the application.

Q: What packaging differences exist among the substitute parts?

A: The main part HM2P07PDP2F5N9LF is supplied in Tray packaging. Substitute parts are supplied in Tube (17011102204, 5100143-1, 5106164-1) or Bulk (PCN21B-110PB-2PF-G) packaging. Packaging differences do not affect electrical or mechanical performance but may influence handling, storage, and logistics considerations.

Q: Are all substitute parts RoHS compliant?

A: Yes. The main part is RoHS Compliant. Substitute parts 17011102204, 5100143-1, and 5106164-1 are ROHS3 Compliant, representing compliance with the latest RoHS directive revision. Part PCN21B-110PB-2PF-G is RoHS Compliant. All parts meet current environmental regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message