HM2P07PDP2F5N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDP2F5N9 is a 132-position (110 + 22 ground) header connector manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole, press-fit backplane connector operates at 1.5 A current rating and 750 Vrms voltage rating across a temperature range of -55°C to 125°C. The part is currently obsolete, necessitating identification of active equivalent and substitute components for ongoing applications and new designs.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	132 (110 + 22 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 1
Mounting Type	Through Hole
Termination	Press-Fit
Contact Finish	Gold (Flash)
Current Rating	1.5 A
Voltage Rating	750 Vrms
Operating Temperature	-55°C to 125°C
Features	Board Guide
Connector Style	A 22

Substitute Part Grouping Explanation

Substitution for the HM2P07PDP2F5N9 is determined by the following critical parameters:

Primary Substitution Criteria:

Pitch: 0.079" (2.00mm) — exact match required
Connector Type: Header, Male Pins — exact match required
Mounting Type: Through Hole — exact match required
Termination: Press-Fit — exact match required
Connector Style: A 22 — exact match required
Operating Temperature Range: -55°C to 125°C — exact match required
Contact Finish: Gold — exact match required

Secondary Compatibility Factors:

Number of Positions: 110-position variants are functionally compatible with the 110-position signal portion of the 132-position main part
Current Rating: 1.5 A minimum required; 1.0 A variants represent reduced capability
Voltage Rating: 500 Vrms minimum acceptable; 750 Vrms provides full compatibility
RoHS Compliance: Active parts are ROHS3 compliant; obsolete part is non-compliant

The substitute parts are grouped into two categories: direct equivalents (132-position) and functional alternatives (110-position variants). The 110-position substitutes omit the 22 ground positions but maintain electrical and mechanical compatibility for applications not requiring the full ground pin complement.

Parameter Comparison

Part Number	Manufacturer	Positions	Rows	Pitch	Current (A)	Voltage (Vrms)	Temp Range	Status	RoHS
HM2P07PDP2F5N9	Amphenol ICC (FCI)	132	5 + 1	2.00mm	1.5	750	-55 to 125°C	Obsolete	Non-compliant
HM2P07PDP2F5N9LF	Amphenol ICC (FCI)	132	5 + 1	2.00mm	1.5	750	-55 to 125°C	Active	Compliant
1-5100143-9	TE Connectivity AMP	110	5	2.00mm	1.5	500	-55 to 125°C	Active	ROHS3
1-5188398-9	TE Connectivity AMP	110	5	2.00mm	1.5	500	-55 to 125°C	Active	ROHS3
17011102204	HARTING	110	5	2.00mm	1.0	—	-55 to 125°C	Active	ROHS3
17011102402	HARTING	110	5	2.00mm	1.0	—	-55 to 125°C	Active	ROHS3
17011104201	HARTING	110	5	2.00mm	1.0	—	-55 to 125°C	Active	ROHS3
3-5100143-0	TE Connectivity AMP	110	5	2.00mm	1.5	500	-55 to 125°C	Active	Compliant
5100143-1	TE Connectivity AMP	110	5	2.00mm	1.5	500	-55 to 125°C	Active	ROHS3
5106164-1	TE Connectivity AMP	110	5	2.00mm	1.5	500	-55 to 125°C	Active	ROHS3
5106413-1	TE Connectivity AMP	110	5	2.00mm	1.5	500	-55 to 125°C	Active	ROHS3

Engineering Selection Recommendations

Direct Equivalent (Preferred for Existing Designs):

HM2P07PDP2F5N9LF is the active production equivalent of the obsolete HM2P07PDP2F5N9. Both maintain 132-position configuration, identical electrical ratings (1.5 A, 750 Vrms), and full temperature range compatibility. The primary difference is RoHS compliance status: the LF variant is ROHS3 compliant, meeting current regulatory requirements. This part is recommended for direct replacement in existing applications without design modification.

Functional Alternatives (110-Position Variants):

TE Connectivity AMP Connectors (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1) and HARTING (17011102204, 17011102402, 17011104201) offer 110-position headers with identical pitch, mounting, and termination. These parts are suitable for applications where the 22 ground positions of the original design are not required. TE Connectivity variants maintain the full 1.5 A current rating and 500 Vrms voltage rating. HARTING variants operate at 1.0 A current rating with unspecified voltage rating.

Compliance Considerations:

All active substitute parts carry ROHS3 compliance certification. The obsolete HM2P07PDP2F5N9 is RoHS non-compliant. For new designs or applications subject to RoHS requirements, HM2P07PDP2F5N9LF or TE Connectivity alternatives are mandatory. HARTING parts are suitable for applications with reduced current requirements (1.0 A maximum).

Frequently Asked Questions (FAQ)

Q: Can I use a 110-position connector to replace the 132-position HM2P07PDP2F5N9?

A: Yes, if your application does not require the 22 dedicated ground positions. The 110-position variants maintain identical pitch (2.00mm), mounting type (through-hole), termination (press-fit), and connector style (A 22). Verify that your PCB layout and signal routing accommodate the reduced position count.

Q: What is the difference between HM2P07PDP2F5N9 and HM2P07PDP2F5N9LF?

A: Both are 132-position headers with identical electrical and mechanical specifications. The primary difference is RoHS compliance: HM2P07PDP2F5N9 is non-compliant (obsolete), while HM2P07PDP2F5N9LF is ROHS3 compliant (active production). The LF variant is the direct replacement for new designs and ongoing production.

Q: Are TE Connectivity and HARTING 110-position connectors interchangeable?

A: Both maintain the same pitch (2.00mm), mounting type (through-hole), termination (press-fit), and connector style (A 22). However, TE Connectivity variants support 1.5 A current rating and 500 Vrms voltage rating, while HARTING variants support 1.0 A current rating with unspecified voltage. Select based on your application's current and voltage requirements.

Q: What packaging options are available for substitute parts?

A: HM2P07PDP2F5N9LF is supplied in Tray packaging. TE Connectivity and HARTING 110-position variants are supplied in Tube packaging. Verify packaging compatibility with your procurement and assembly processes.

Q: Can I use a substitute part with lower current rating (1.0 A vs. 1.5 A)?

A: Only if your application's maximum current draw does not exceed 1.0 A per contact. HARTING variants (17011102204, 17011102402, 17011104201) are rated at 1.0 A. Exceeding this rating may result in contact degradation or failure. Verify your circuit's actual current requirements before selecting a lower-rated alternative.

Q: Are all substitute parts RoHS compliant?

A: All active substitute parts listed are ROHS3 compliant. The original HM2P07PDP2F5N9 is RoHS non-compliant. For applications subject to RoHS requirements, use only active production variants.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message