Request Quote
(Ships tomorrow)
HM2P07PDP2C5N9LF Equivalent & Substitute Parts
Part Overview
The HM2P07PDP2C5N9LF is a 132-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This press-fit through-hole connector features 110 signal positions plus 22 dedicated ground positions arranged in a 5+1 row configuration with 2.00mm pitch. The part is currently active and available in tray packaging with 907 units in stock.
Substitute parts become necessary when the original part reaches end-of-life status, when alternative sourcing improves lead times or cost efficiency, or when design flexibility allows for compatible alternatives that meet the same electrical and mechanical requirements.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Type | Header, Male Pins |
| Number of Positions | 132 (110 + 22 Ground) |
| Pitch | 0.079" (2.00mm) |
| Number of Rows | 5 + 1 |
| Mounting Type | Through Hole |
| Termination | Press-Fit |
| Current Rating | 1.5 A |
| Voltage Rating | 750Vrms |
| Operating Temperature | -55°C ~ 125°C |
| Contact Finish | Gold |
| RoHS Status | RoHS Compliant |
Substitute Part Grouping Explanation
Substitution eligibility for the HM2P07PDP2C5N9LF is determined by the following critical parameters:
Primary Matching Criteria:
- Pitch: 0.079" (2.00mm)
- Mounting Type: Through Hole
- Termination: Press-Fit
- Connector Type: Header, Male Pins
- Operating Temperature Range: -55°C ~ 125°C
Secondary Compatibility Factors:
- Contact Finish: Gold or Gold-Palladium
- Current Rating: Minimum 1.0 A
- Voltage Rating: Minimum 300V
- Moisture Sensitivity Level: 1 (Unlimited)
The substitute parts identified fall into two distinct groups based on position count:
Group 1: 110-Position Alternatives (17011102204, 17011102402, 5100143-1, 5106164-1) These parts reduce the total position count from 132 to 110 by eliminating the dedicated ground row. They maintain the 5-row configuration with 2.00mm pitch and press-fit termination. These substitutes are suitable for applications where the additional 22 ground positions are not required.
Group 2: 154-Position Alternative (PCN21B-110PB-2PF-G) This part increases the total position count to 154 (110 signal + 44 ground) with a 5+2 row configuration. It provides enhanced ground distribution and is suitable for applications requiring additional grounding capability.
Parameter Comparison
| Parameter | HM2P07PDP2C5N9LF (Main) | 17011102204 | 17011102402 | 5100143-1 | 5106164-1 | PCN21B-110PB-2PF-G |
|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC (FCI) | HARTING | HARTING | TE Connectivity | TE Connectivity | Hirose Electric |
| Number of Positions | 132 (110+22) | 110 | 110 | 110 | 110 | 154 (110+44) |
| Number of Rows | 5 + 1 | 5 | 5 | 5 | 5 | 5 + 2 |
| Pitch | 0.079" (2.00mm) | 0.079" (2.00mm) | 0.079" (2.00mm) | 0.079" (2.00mm) | 0.079" (2.00mm) | 0.079" (2.00mm) |
| Mounting Type | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole |
| Termination | Press-Fit | Press-Fit | Press-Fit | Press-Fit | Press-Fit | Press-Fit |
| Current Rating | 1.5 A | 1.0 A | 1.0 A | 1.5 A | 1.5 A | 1.5 A |
| Voltage Rating | 750Vrms | — | — | 500Vrms | 500Vrms | 300V |
| Operating Temperature | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C |
| Contact Finish | Gold (Flash) | Gold or Gold-Palladium | Gold or Gold-Palladium | Gold (30.0µin) | Gold (30.0µin) | Gold (31.5µin) |
| RoHS Status | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | RoHS Compliant |
| Product Status | Active | Active | Active | Active | Active | Obsolete |
| Inventory Available | 907 Pcs | 1042 Pcs | 885 Pcs | 3040 Pcs | 1516 Pcs | 1117 Pcs |
Engineering Selection Recommendations
For 110-Position Requirements:
The HARTING 17011102204 and 17011102402 are active products with identical electrical and mechanical specifications. Both feature 5-row configurations with 2.00mm pitch and press-fit termination. The primary distinction is packaging: 17011102204 is supplied in tubes while 17011102402 is also tube-packaged. Both are ROHS3 compliant and suitable for applications where the dedicated ground row is not required.
The TE Connectivity 5100143-1 and 5106164-1 are active Z-PACK series alternatives with higher current ratings (1.5 A) matching the original part. Both support 500Vrms operation and feature gold contact finish at 30.0µin thickness. The 5106164-1 includes an alignment strip feature in addition to the board guide. Both are ROHS3 compliant with established inventory availability.
For 154-Position Requirements:
The Hirose Electric PCN21B-110PB-2PF-G provides increased position density with 5+2 row configuration and 44 dedicated ground positions. This part is marked as obsolete and carries a lower voltage rating (300V) compared to the original specification. Selection of this alternative is appropriate only when the additional ground distribution is functionally necessary and the reduced voltage rating is acceptable for the application.
Compliance Considerations:
All substitute parts maintain the -55°C to 125°C operating temperature range and MSL 1 (Unlimited) moisture sensitivity rating. RoHS and REACH compliance status varies by manufacturer; verify compliance requirements against your specific regulatory framework before final selection.
Frequently Asked Questions (FAQ)
Q: Can I use a 110-position substitute in place of the 132-position HM2P07PDP2C5N9LF?
A: Yes, if your application does not require the 22 dedicated ground positions. The 110-position alternatives (17011102204, 17011102402, 5100143-1, 5106164-1) maintain identical pitch, mounting type, termination method, and operating temperature range. Verify that your PCB layout and connector footprint accommodate the reduced row count (5 rows instead of 5+1).
Q: What is the difference between the HARTING and TE Connectivity 110-position options?
A: Both HARTING parts (17011102204, 17011102402) are rated for 1.0 A current with unspecified voltage ratings. The TE Connectivity parts (5100143-1, 5106164-1) are rated for 1.5 A current at 500Vrms, matching the original part's current capability. The 5106164-1 includes an alignment strip feature. Select based on your application's current and voltage requirements.
Q: Is the Hirose PCN21B-110PB-2PF-G a direct replacement?
A: No. This part is obsolete and features a different row configuration (5+2 instead of 5+1) with 154 total positions and a lower voltage rating (300V versus 750Vrms). It is suitable only for applications requiring the additional 44 ground positions and where the reduced voltage specification is acceptable.
Q: What packaging formats are available for the substitute parts?
A: HARTING parts are supplied in tubes. TE Connectivity parts are supplied in tubes. Hirose PCN21B-110PB-2PF-G is supplied in bulk. Verify packaging compatibility with your assembly and storage requirements.
Q: Do all substitute parts meet RoHS requirements?
A: Yes. All identified substitutes are RoHS compliant or ROHS3 compliant. Verify specific REACH status with your supplier if REACH compliance is a regulatory requirement for your application.
Q: What is the impact of different contact finish thicknesses?
A: The original part specifies flash gold finish. Substitute parts specify gold finishes ranging from 30.0µin to 31.5µin thickness. These variations are within standard industry tolerances for backplane connector applications and do not affect electrical performance or compatibility.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts