HM2P07PDP2C5N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDP2C5N9 is a 132-position (110 + 22 ground) header connector manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole, press-fit backplane connector features a 2.00mm pitch and is rated for 1.5A at 750Vrms across an operating temperature range of -55°C to 125°C. The part is currently obsolete, necessitating identification of active equivalent and substitute connectors that maintain functional compatibility for new designs or replacement applications.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	132 (110 + 22 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 1
Mounting Type	Through Hole
Termination	Press-Fit
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C to 125°C
Contact Finish	Gold (Flash)
Features	Board Guide

Substitute Part Grouping Explanation

Substitution logic is based on the following critical parameters:

Position Count & Configuration: The main part contains 132 positions (110 signal + 22 ground). Direct substitutes must maintain this exact configuration or provide equivalent signal/ground distribution.
Pitch & Row Structure: All substitutes maintain 2.00mm pitch and 5-row configuration for mechanical compatibility.
Electrical Ratings: Current rating (1.5A) and voltage rating (750Vrms for main part; 500Vrms for TE Connectivity and HARTING alternatives) determine circuit compatibility.
Termination Method: Press-fit termination is consistent across all listed substitutes.
Contact Finish: Gold plating ensures consistent electrical performance and corrosion resistance.
Compliance Status: RoHS3 compliance and REACH status affect suitability for regulated applications.

Substitutes are grouped into two categories:

Direct Equivalent (132-Position): HM2P07PDP2C5N9LF maintains identical position count and electrical specifications with active product status.
Functional Alternatives (110-Position): TE Connectivity Z-PACK series (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1) and HARTING har-bus® HM series (17011102204, 17011102402, 17011104201) provide 110-position configurations suitable for applications not requiring the full 132-position capacity.

Parameter Comparison

Parameter	HM2P07PDP2C5N9 (Main)	HM2P07PDP2C5N9LF	1-5100143-9	1-5188398-9	17011102204	17011102402	3-5100143-0	5100143-1	5106164-1	5106413-1
Manufacturer	Amphenol ICC (FCI)	Amphenol ICC (FCI)	TE Connectivity	TE Connectivity	HARTING	HARTING	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity
Series	Millipacs®	Millipacs®	Z-PACK	Z-PACK	har-bus® HM	har-bus® HM	Z-PACK	Z-PACK	Z-PACK	Z-PACK
Positions	132 (110 + 22 GND)	132 (110 + 22 GND)	110	110	110	110	110	110	110	110
Pitch (mm)	2.00	2.00	2.00	2.00	2.00	2.00	2.00	2.00	2.00	2.00
Rows	5 + 1	5 + 1	5	5	5	5	5	5	5	5
Mounting	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit
Current Rating (A)	1.5	1.5	1.5	1.5	1.0	1.0	1.5	1.5	1.5	1.5
Voltage Rating (Vrms)	750	750	500	500	—	—	500	500	500	500
Operating Temperature	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C
Contact Finish	Gold (Flash)	Gold (Flash)	Gold	Gold (30.0µin)	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold (30.0µin)	Gold (30.0µin)	Gold (30.0µin)	Gold (30.0µin)
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	Non-compliant	Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Affected	REACH Unaffected	Vendor Undefined	REACH Unaffected	REACH Unaffected	Vendor Undefined	Vendor Undefined	REACH Unaffected	Vendor Undefined
Packaging	—	Tray	Tube	Tube	Tube	Tube	Tube	Tube	Tube	Tube
Inventory (Pcs)	860	907	725	922	1042	885	1050	3040	1516	1118

Engineering Selection Recommendations

For Direct Replacement (132-Position Requirement):

HM2P07PDP2C5N9LF is the only active equivalent maintaining the full 132-position configuration. This part is RoHS3 compliant and REACH affected, making it suitable for regulated markets. It provides identical electrical and mechanical specifications to the obsolete main part with active product status and higher inventory availability (907 pcs).

For Reduced Position Count (110-Position Applications):

When circuit design permits use of 110-position connectors, the following active alternatives are available:

TE Connectivity Z-PACK Series: 5100143-1 offers the highest inventory (3040 pcs) with ROHS3 compliance and 1.5A current rating at 500Vrms. Parts 1-5100143-9, 1-5188398-9, 3-5100143-0, 5106164-1, and 5106413-1 provide equivalent electrical performance with varying feature sets (5106164-1 includes alignment strip).
HARTING har-bus® HM Series: 17011102204, 17011102402, and 17011104201 are ROHS3 compliant alternatives with 1.0A current rating. These parts are suitable for applications with lower current requirements and provide REACH unaffected status.

Compliance Considerations:

All active substitutes are RoHS3 compliant. For applications requiring REACH unaffected status, select from TE Connectivity 1-5100143-9, HARTING 17011102204, 17011102402, or 17011104201, or TE Connectivity 5106164-1.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDP2C5N9LF directly replace the obsolete HM2P07PDP2C5N9?

A: Yes. HM2P07PDP2C5N9LF maintains identical position count (132), pitch (2.00mm), row configuration (5 + 1), electrical ratings (1.5A, 750Vrms), and operating temperature range (-55°C to 125°C). The primary difference is product status (active vs. obsolete) and packaging (tray vs. unspecified).

Q: What is the key difference between the 132-position and 110-position substitutes?

A: The main part contains 132 positions (110 signal + 22 dedicated ground). The 110-position alternatives provide only signal positions without dedicated ground rows. Circuit redesign is required if the application depends on the dedicated ground distribution of the original 132-position configuration.

Q: Are the TE Connectivity and HARTING 110-position parts electrically compatible with the original part?

A: Electrical compatibility depends on circuit requirements. All substitutes maintain 2.00mm pitch, through-hole press-fit termination, and -55°C to 125°C operating temperature. However, TE Connectivity parts are rated at 500Vrms (vs. 750Vrms for the main part) and HARTING parts at 1.0A (vs. 1.5A). Verify that your application does not exceed these reduced ratings.

Q: Which substitute offers the best compliance profile?

A: All active substitutes are RoHS3 compliant. For REACH unaffected status, select 1-5100143-9, 17011102204, 17011102402, 17011104201, or 5106164-1. For REACH affected applications, HM2P07PDP2C5N9LF is the direct equivalent.

Q: What packaging options are available?

A: HM2P07PDP2C5N9LF is supplied in trays. All TE Connectivity and HARTING 110-position alternatives are supplied in tubes.

Q: Which substitute has the highest inventory availability?

A: TE Connectivity 5100143-1 (Z-PACK series) has the highest inventory at 3040 pcs, followed by HARTING 17011102204 at 1042 pcs.

Q: Can I use a 110-position connector in a design originally specified for 132 positions?

A: Only if your circuit design does not require the dedicated ground distribution of the original 22-position ground row. Mechanical fit is compatible due to identical pitch and row structure, but electrical functionality must be verified against your specific application requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message