HM2P07PDP265N9L Equivalent & Substitute Parts

Part Overview

The HM2P07PDP265N9L is a 132-position backplane connector header manufactured by Amphenol ICC (FCI) as part of the Millipacs® series. This press-fit connector features male pins with 2.00mm pitch and is designed for through-hole mounting applications. The part is currently listed as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Substiute Parts

HM2P07PDP265N9L

Amphenol ICC (FCI)In Stock: 924HM2P07PDP265N9L Datasheet

Current PartRFQ

HM2P07PDP265N9LLF

Amphenol ICC (FCI)In Stock: 964HM2P07PDP265N9LLF Datasheet

DirectRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

3-5100143-0

TE Connectivity AMP ConnectorsIn Stock: 10903-5100143-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDP265N9L is determined by the following critical parameters: connector type (header, male pins), pitch (2.00mm), mounting type (through hole), termination method (press-fit), connector style (A 22), operating temperature range (-55°C ~ 125°C), and contact finish (gold). Position count and row configuration are secondary considerations when the primary electrical and mechanical parameters align.

The substitute parts are grouped into two categories:

Direct Equivalent (Same Position Count): HM2P07PDP265N9LLF maintains identical electrical and mechanical specifications with the primary difference being packaging format and product status (active vs. obsolete).

Functional Alternatives (Reduced Position Count): 17011102402 (HARTING) and 3-5100143-0 (TE Connectivity) provide 110-position configurations with 5 rows instead of the original 5+1 row configuration. These alternatives maintain core electrical parameters (pitch, termination, mounting type, operating temperature) but differ in position count and current/voltage ratings.

Parameter Comparison

Engineering Selection Recommendations

HM2P07PDP265N9LLF is the primary substitute for the obsolete HM2P07PDP265N9L. This part maintains identical electrical and mechanical specifications while offering active product status and RoHS compliance. The only distinction is packaging format (tray vs. unspecified original packaging). This substitute is suitable for direct replacement in all applications where the original part was specified.

17011102402 (HARTING har-bus® HM) and 3-5100143-0 (TE Connectivity Z-PACK) are functional alternatives for applications that can accommodate a 110-position, 5-row configuration. The 17011102402 operates at 1 A current rating compared to the original 1.5 A specification. The 3-5100143-0 maintains the 1.5 A current rating but operates at 500Vrms versus the original 750Vrms. Both alternatives maintain the 2.00mm pitch, press-fit termination, through-hole mounting, and -55°C to 125°C operating temperature range. Selection between these alternatives depends on whether the application requires the full 132-position capacity or can function with 110 positions.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDP265N9LLF be used as a direct replacement for HM2P07PDP265N9L?

A: Yes. HM2P07PDP265N9LLF is electrically and mechanically identical to the obsolete HM2P07PDP265N9L. The primary differences are product status (active vs. obsolete), packaging format (tray), and compliance certifications (RoHS compliant). No design modifications are required.

Q: What is the key difference between the 132-position original part and the 110-position alternatives?

A: The original HM2P07PDP265N9L features 132 positions arranged in 5 rows plus 1 dedicated ground row. The alternatives (17011102402 and 3-5100143-0) provide 110 positions in a standard 5-row configuration. Applications requiring the full 132-position capacity or dedicated ground row isolation must use HM2P07PDP265N9LLF. Applications with 110-position requirements can use the alternatives.

Q: Are there current rating differences between the substitute parts?

A: Yes. The original HM2P07PDP265N9L and HM2P07PDP265N9LLF are rated at 1.5 A. The HARTING 17011102402 is rated at 1 A. The TE Connectivity 3-5100143-0 is rated at 1.5 A. Applications requiring 1.5 A per contact must avoid the HARTING alternative.

Q: What is the voltage rating difference for the TE Connectivity alternative?

A: The original HM2P07PDP265N9L operates at 750Vrms. The TE Connectivity 3-5100143-0 operates at 500Vrms. Applications requiring 750Vrms operation must use the Amphenol or HARTING alternatives. The HARTING part does not specify a voltage rating in the provided data.

Q: Are all substitute parts RoHS compliant?

A: HM2P07PDP265N9LLF is RoHS Compliant. The HARTING 17011102402 is ROHS3 Compliant. The TE Connectivity 3-5100143-0 is RoHS Compliant. All active alternatives meet current RoHS requirements.

Q: What packaging formats are available for these connectors?

A: HM2P07PDP265N9LLF is supplied in tray packaging. The HARTING 17011102402 and TE Connectivity 3-5100143-0 are supplied in tube packaging. Original packaging for HM2P07PDP265N9L is not specified.