HM2P07PDP265N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDP265N9 is a 132-position header connector (110 + 22 ground) with 2.00mm pitch, designed for backplane applications using press-fit termination technology. This connector is manufactured by Amphenol ICC (FCI) as part of the Millipacs® series and features through-hole mounting with gold-plated contacts rated for 1.5A at 750Vrms across an operating temperature range of -55°C to 125°C.

The HM2P07PDP265N9 is classified as obsolete. Equivalent and substitute parts are available from active product lines that maintain compatibility with the core electrical and mechanical specifications, enabling continued system integration and component procurement.

Substiute Parts

HM2P07PDP265N9

Amphenol ICC (FCI)In Stock: 1044HM2P07PDP265N9 Datasheet

Current PartRFQ

HM2P07PDP265N9LF

Amphenol ICC (FCI)In Stock: 1260HM2P07PDP265N9LF Datasheet

DirectRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

3-5100143-0

TE Connectivity AMP ConnectorsIn Stock: 10903-5100143-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDP265N9 is determined by the following critical parameters:

• Connector Type & Style: Header, Male Pins with Connector Style A 22
• Pitch: 0.079" (2.00mm) spacing
• Mounting & Termination: Through-hole press-fit technology
• Contact Finish: Gold plating
• Operating Temperature Range: -55°C to 125°C
• Current & Voltage Ratings: Minimum 1.5A at 750Vrms

Substitute parts are grouped into two categories:

Category 1 - Direct Equivalent (Same Position Count): HM2P07PDP265N9LF maintains the full 132-position configuration with identical electrical and mechanical specifications, differing only in packaging and RoHS compliance status.

Category 2 - Functional Equivalent (Reduced Position Count): Parts 17011102402 (HARTING) and 3-5100143-0 (TE Connectivity) provide 110-position configurations. These substitutes maintain core electrical parameters (pitch, termination, contact finish, operating temperature) but operate at reduced current ratings (1.0A and 1.5A respectively) and may have different voltage specifications.

Parameter Comparison

Engineering Selection Recommendations

HM2P07PDP265N9LF is the primary substitute for direct replacement. This part maintains identical position count (132), electrical ratings (1.5A, 750Vrms), and mechanical specifications while offering active product status and RoHS compliance. The transition from non-compliant to compliant status aligns with current regulatory requirements.

17011102402 (HARTING har-bus® HM) and 3-5100143-0 (TE Connectivity Z-PACK) are functional equivalents suitable for applications where the 110-position configuration is acceptable. Both maintain the 2.00mm pitch, press-fit termination, and operating temperature range. Selection between these two depends on current rating requirements: the HARTING part is rated at 1.0A, while the TE Connectivity part maintains the full 1.5A rating. The TE Connectivity part also provides the specified 500Vrms voltage rating, whereas the HARTING part does not specify voltage.

Component selection should prioritize active product status and compliance certifications (RoHS, REACH) for new designs and long-term availability assurance.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDP265N9LF be used as a direct replacement for HM2P07PDP265N9?

A: Yes. HM2P07PDP265N9LF is a direct equivalent with identical position count (132), pitch (2.00mm), termination (press-fit), and electrical ratings (1.5A, 750Vrms). The primary differences are packaging format (tray vs. unspecified) and RoHS compliance status (compliant vs. non-compliant).

Q: What are the limitations of using 17011102402 or 3-5100143-0 as substitutes?

A: Both parts reduce the position count from 132 to 110, eliminating the 22 dedicated ground positions. The HARTING part (17011102402) operates at 1.0A current rating compared to the original 1.5A specification. The TE Connectivity part (3-5100143-0) maintains the 1.5A rating but specifies 500Vrms instead of 750Vrms. These parts are suitable only for applications where the reduced position count and modified electrical parameters are acceptable.

Q: Are all substitute parts compatible with the same PCB footprint?

A: HM2P07PDP265N9LF shares the identical footprint with the original part due to matching position count and pitch. The 110-position substitutes (17011102402 and 3-5100143-0) have different footprints due to reduced position count and row configuration (5 rows vs. 5 + 1 rows). PCB redesign is required for these alternatives.

Q: What is the significance of the packaging differences?

A: Packaging format (tray, tube, or unspecified) affects handling, storage, and automated assembly processes but does not impact electrical or mechanical performance. Selection should align with procurement and assembly workflow requirements.

Q: Which substitute part is recommended for new designs?

A: HM2P07PDP265N9LF is recommended for new designs requiring the full 132-position configuration. For applications accepting 110-position connectors, 3-5100143-0 (TE Connectivity) is preferred due to maintained 1.5A current rating and active product status with RoHS compliance.