HM2P07PDP261N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDP261N9 is a 154-position backplane connector header manufactured by Amphenol ICC (FCI) from the Millipacs® series. This press-fit through-hole connector features a 2.00mm pitch and supports 1.5A current at 750Vrms. The main part is currently obsolete, making identification of active equivalent and substitute parts essential for ongoing system support and new designs requiring compatible interconnect solutions.

Substiute Parts

HM2P07PDP261N9

Amphenol ICC (FCI)In Stock: 926HM2P07PDP261N9 Datasheet

Current PartRFQ

HM2P07PDP261N9LF

Amphenol ICC (FCI)In Stock: 1151HM2P07PDP261N9LF Datasheet

DirectRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

3-5100143-0

TE Connectivity AMP ConnectorsIn Stock: 10903-5100143-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters: connector type (Header, Male Pins), pitch (2.00mm), mounting method (Through Hole), termination technology (Press-Fit), operating temperature range (-55°C ~ 125°C), and contact finish (Gold). Position count and row configuration may vary based on application requirements, provided the fundamental electrical and mechanical interfaces remain compatible.

The substitute parts are grouped into two categories:

Direct Equivalent (Same Position Count): HM2P07PDP261N9LF maintains identical 154-position configuration with matching electrical and mechanical specifications. This part represents the active production equivalent with improved compliance status.

Functional Equivalents (Reduced Position Count): 17011102402 (HARTING har-bus® HM) and 3-5100143-0 (TE Connectivity Z-PACK) provide 110-position configurations. These parts share the same pitch, mounting type, termination method, and operating temperature range, making them suitable for applications where the full 154-position capacity is not required.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (154-Position Requirement): HM2P07PDP261N9LF is the recommended direct equivalent. It maintains identical electrical and mechanical specifications while offering active product status and RoHS compliance. This part is suitable for designs requiring the full 154-position configuration with ground planes.

For Reduced Position Count Applications (110-Position Requirement): Both 17011102402 and 3-5100143-0 are active alternatives. The 3-5100143-0 (TE Connectivity Z-PACK) maintains the original 1.5A current rating and provides RoHS compliance. The 17011102402 (HARTING har-bus® HM) offers ROHS3 compliance but operates at 1A current rating. Selection between these two depends on current capacity requirements and preferred supplier qualification.

Compliance Considerations: The original HM2P07PDP261N9 is RoHS non-compliant. All substitute parts listed are RoHS compliant or ROHS3 compliant, making them suitable for applications subject to RoHS regulations.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDP261N9LF be used as a direct replacement for HM2P07PDP261N9? A: Yes. HM2P07PDP261N9LF is the active production equivalent with identical position count (154), pitch (2.00mm), current rating (1.5A), voltage rating (750Vrms), and operating temperature range (-55°C ~ 125°C). The primary difference is product status (Active vs. Obsolete) and improved RoHS compliance.

Q: What is the difference between the 154-position and 110-position alternatives? A: The 154-position HM2P07PDP261N9LF includes 44 dedicated ground positions across 7 rows (5 + 2 configuration). The 110-position alternatives (17011102402 and 3-5100143-0) use a 5-row configuration without the additional ground row. Both maintain the same 2.00mm pitch and press-fit termination.

Q: Are there current rating differences between substitute parts? A: Yes. HM2P07PDP261N9LF and 3-5100143-0 both support 1.5A. The 17011102402 (HARTING) is rated for 1A. Applications requiring 1.5A current capacity should use either the Amphenol or TE Connectivity parts.

Q: What packaging options are available? A: HM2P07PDP261N9LF is supplied in Tray packaging. Both 17011102402 and 3-5100143-0 are supplied in Tube packaging. Packaging selection may affect handling, storage, and integration into assembly processes.

Q: Are all substitute parts RoHS compliant? A: Yes. HM2P07PDP261N9LF is RoHS Compliant. 17011102402 is ROHS3 Compliant. 3-5100143-0 is RoHS Compliant. The original HM2P07PDP261N9 is RoHS non-compliant.