HM2P07PDP255N9LF Equivalent & Substitute Parts

Part Overview

The HM2P07PDP255N9LF is a 132-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole press-fit connector features male pins with 2.00mm pitch and is designed for high-density interconnect applications requiring robust electrical and mechanical performance. The connector maintains active product status with full RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component sourcing flexibility and supply chain continuity.

Substiute Parts

HM2P07PDP255N9LF

Amphenol ICC (FCI)In Stock: 1098HM2P07PDP255N9LF Datasheet

Current PartRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDP255N9LF is determined by alignment of the following critical parameters:

• Pitch: 0.079" (2.00mm) — must match exactly for PCB layout compatibility
• Connector Type: Header, Male Pins — functional role requirement
• Mounting Type: Through Hole — board assembly method
• Termination: Press-Fit — assembly process compatibility
• Operating Temperature Range: -55°C ~ 125°C — thermal performance envelope
• Contact Finish: Gold or equivalent — electrical performance and corrosion resistance
• Voltage Rating: 750Vrms or higher — electrical safety margin
• Current Rating: 1.5 A or higher — current capacity requirement

The identified substitute part 17011102402 (HARTING har-bus® HM series) meets these core electrical and mechanical criteria. Position count variation (110 vs. 132) reflects application-specific requirements and does not preclude substitution when the target application requires fewer positions.

Parameter Comparison

Engineering Selection Recommendations

Selection between HM2P07PDP255N9LF and 17011102402 depends on application-specific requirements:

Use HM2P07PDP255N9LF when:

• Application requires 132 total positions (110 signal + 22 ground)
• Current per pin must reach 1.5 A
• Amphenol ICC (FCI) supply chain or qualification is mandated
• Tray packaging is required for assembly operations

Use 17011102402 when:

• Application requires 110 positions maximum
• Current per pin requirement is 1 A or lower
• HARTING har-bus® HM series qualification is acceptable
• Tube packaging meets logistics requirements
• Supply availability or cost optimization favors HARTING sourcing

Both parts maintain identical pitch, mounting type, termination method, and operating temperature range. Both achieve RoHS compliance and support the same connector style (A 22). The substitute part is suitable for applications with reduced position count and current requirements.

Frequently Asked Questions (FAQ)

Q: Can 17011102402 be used as a direct replacement for HM2P07PDP255N9LF?

A: Direct replacement is possible only if the application requires 110 or fewer positions and the current per pin does not exceed 1 A. The identical pitch (2.00mm), mounting type (through hole), and termination method (press-fit) ensure mechanical and assembly compatibility. PCB layout must accommodate the reduced position count and row configuration (5 rows vs. 5 + 1 rows).

Q: What are the key differences between these connectors?

A: The main differences are position count (132 vs. 110), current rating (1.5 A vs. 1 A), number of rows (6 vs. 5), and manufacturer (Amphenol ICC vs. HARTING). Electrical parameters including pitch, voltage rating, operating temperature, and contact finish remain equivalent or compatible.

Q: Are there compatibility concerns with different manufacturers?

A: Both connectors conform to the same pitch standard (2.00mm) and connector style (A 22). Mechanical and electrical compatibility is maintained. Qualification, supply chain documentation, and procurement procedures may differ between manufacturers and should be verified against application requirements.

Q: Does packaging type affect connector performance?

A: Packaging (tray vs. tube) affects logistics, storage, and assembly handling but does not impact electrical or mechanical performance. Selection should align with manufacturing process requirements and inventory management practices.

Q: Are both parts RoHS compliant?

A: Yes. HM2P07PDP255N9LF is RoHS Compliant, and 17011102402 is ROHS3 Compliant. Both meet current environmental and regulatory requirements.