Equivalent & Substitute Parts for HM2P07PDP221N9L

Part Overview

The HM2P07PDP221N9L is a 154-position backplane connector header manufactured by Amphenol ICC (FCI) as part of the Millipacs® series. This through-hole press-fit connector features a 2.00mm pitch and supports 1.5A current at 750Vrms, with operating temperature range of -55°C to 125°C. The main part is classified as obsolete, making equivalent substitutes necessary for ongoing system support and new designs requiring compatible interconnect solutions.

Substiute Parts

HM2P07PDP221N9L

Amphenol ICC (FCI)In Stock: 682HM2P07PDP221N9L Datasheet

Current PartRFQ

HM2P07PDP221N9LLF

Amphenol ICC (FCI)In Stock: 977HM2P07PDP221N9LLF Datasheet

DirectRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

3-5100143-0

TE Connectivity AMP ConnectorsIn Stock: 10903-5100143-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HM2P07PDP221N9L is determined by strict alignment of electrical and mechanical parameters. The primary substitution criteria are:

Electrical Parameters: Pitch (2.00mm), connector type (Header, Male Pins), termination method (Press-Fit), current rating (minimum 1.5A), voltage rating (minimum 750Vrms), and operating temperature range (-55°C to 125°C).

Mechanical Parameters: Mounting type (Through Hole), contact finish (Gold), connector style (A 22), and presence of board guide feature.

Position Configuration: The original part contains 154 positions (110 signal + 44 ground) across 5 + 2 rows. Direct substitutes maintain this exact configuration. Partial substitutes with 110 positions (5 rows) are listed as manufacturer-recommended alternatives where the full 154-position configuration is not required.

Substitute Categories:

1. Direct Equivalent (Same Manufacturer): HM2P07PDP221N9LLF maintains identical electrical and mechanical specifications with active product status and improved packaging (Tray).

2. Manufacturer-Recommended Alternatives (Reduced Position Count): 17011102402 (HARTING) and 3-5100143-0 (TE Connectivity) provide 110-position configurations with compatible pitch, termination, and operating parameters, suitable for applications not requiring the full 154-position capacity.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (154-Position Requirement):

Select HM2P07PDP221N9LLF when the full 154-position configuration is mandatory. This part is the direct equivalent with identical electrical and mechanical specifications. It maintains active product status, RoHS compliance, and improved packaging (Tray format). Inventory availability is higher (943 pcs) compared to the obsolete main part.

For Reduced Configuration (110-Position Requirement):

The 17011102402 (HARTING, har-bus® HM series) and 3-5100143-0 (TE Connectivity, Z-PACK series) are manufacturer-recommended alternatives when applications require only 110 positions. Both maintain the 2.00mm pitch, through-hole press-fit termination, and -55°C to 125°C operating range. The TE Connectivity part (3-5100143-0) matches the original 1.5A current rating and provides superior voltage rating (500Vrms). The HARTING part (17011102402) operates at 1A current rating and does not specify voltage rating.

Compliance Considerations:

All active substitutes are RoHS compliant. The HM2P07PDP221N9LLF and 3-5100143-0 are explicitly RoHS Compliant. The 17011102402 is ROHS3 Compliant. For new designs, HM2P07PDP221N9LLF is the preferred choice due to identical specifications and active status. For legacy system maintenance where 110 positions suffice, either HARTING or TE Connectivity alternatives are acceptable based on current and voltage requirements.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDP221N9LLF directly replace HM2P07PDP221N9L?

A: Yes. HM2P07PDP221N9LLF is the direct equivalent with identical electrical and mechanical specifications. The difference is packaging format (Tray vs. unspecified) and product status (Active vs. Obsolete). All electrical parameters, position count, pitch, termination method, and operating temperature range are identical.

Q: What is the difference between the 154-position and 110-position substitutes?

A: The main part and HM2P07PDP221N9LLF contain 154 positions (110 signal + 44 ground) across 5 + 2 rows. The HARTING (17011102402) and TE Connectivity (3-5100143-0) alternatives provide 110 positions across 5 rows. These reduced-position parts are suitable only for applications not requiring the full 154-position capacity. All maintain the same 2.00mm pitch and press-fit termination.

Q: Are there current rating differences between substitutes?

A: Yes. The main part and HM2P07PDP221N9LLF are rated at 1.5A. The TE Connectivity part (3-5100143-0) is also rated at 1.5A. The HARTING part (17011102402) is rated at 1A. For applications requiring 1.5A, use HM2P07PDP221N9LLF or 3-5100143-0.

Q: What are the voltage rating differences?

A: The main part and HM2P07PDP221N9LLF are rated at 750Vrms. The TE Connectivity part (3-5100143-0) is rated at 500Vrms. The HARTING part (17011102402) does not specify voltage rating. For applications requiring 750Vrms, use HM2P07PDP221N9LLF.

Q: Which substitute has the best availability?

A: HM2P07PDP221N9LLF has 943 pcs in stock. The TE Connectivity part (3-5100143-0) has 1050 pcs. The HARTING part (17011102402) has 885 pcs. All three substitutes have adequate inventory for production requirements.

Q: Are all substitutes RoHS compliant?

A: Yes. HM2P07PDP221N9LLF is RoHS Compliant. The TE Connectivity part (3-5100143-0) is RoHS Compliant. The HARTING part (17011102402) is ROHS3 Compliant. All meet current RoHS requirements.

Q: What packaging formats are available?

A: HM2P07PDP221N9LLF is supplied in Tray format. The HARTING part (17011102402) and TE Connectivity part (3-5100143-0) are supplied in Tube format. Packaging selection depends on assembly process requirements and handling procedures.