Request Quote
(Ships tomorrow)
HM2P07PDP221N9 Equivalent & Substitute Parts
Part Overview
The HM2P07PDP221N9 is a 154-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole press-fit connector features a 2.00mm pitch and supports 1.5A current at 750Vrms. The part is classified as obsolete, making substitute parts necessary for new designs and ongoing production requirements. Active alternatives from TE Connectivity and HARTING provide equivalent or compatible functionality with current product status and improved compliance certifications.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Type | Header, Male Pins |
| Number of Positions | 154 (110 + 44 Ground) |
| Pitch | 0.079" (2.00mm) |
| Number of Rows | 5 + 2 |
| Mounting Type | Through Hole |
| Termination | Press-Fit |
| Current Rating | 1.5 A |
| Voltage Rating | 750Vrms |
| Operating Temperature | -55°C to 125°C |
| Contact Finish | Gold (Flash) |
| Features | Board Guide |
| MSL Rating | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution for the HM2P07PDP221N9 is determined by the following critical parameters:
Direct Equivalent (Same Position Count):
- HM2P07PDP221N9LF: Identical 154-position configuration with active product status and RoHS compliance
Functional Alternatives (110-Position Core Configuration): Substitute parts with 110 positions represent the primary signal positions of the original 154-position connector. These alternatives maintain the core electrical and mechanical specifications:
- Pitch: 0.079" (2.00mm)
- Rows: 5
- Mounting: Through Hole, Press-Fit
- Current Rating: 1.0–1.5 A
- Operating Temperature: -55°C to 125°C
- Contact Finish: Gold or Gold-Palladium
- Features: Board Guide
The 110-position alternatives are available from three manufacturers: TE Connectivity (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1) and HARTING (17011102204, 17011102402, 17011104201).
Parameter Comparison
| Part Number | Manufacturer | Positions | Pitch (mm) | Rows | Current (A) | Voltage (Vrms) | Temp Range (°C) | Contact Finish | Product Status | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|---|
| HM2P07PDP221N9 | Amphenol ICC (FCI) | 154 | 2.00 | 5 + 2 | 1.5 | 750 | -55 to 125 | Gold (Flash) | Obsolete | Non-compliant |
| HM2P07PDP221N9LF | Amphenol ICC (FCI) | 154 | 2.00 | 5 + 2 | 1.5 | 750 | -55 to 125 | Gold (Flash) | Active | Compliant |
| 1-5100143-9 | TE Connectivity AMP | 110 | 2.00 | 5 | 1.5 | 500 | -55 to 125 | Gold | Active | ROHS3 Compliant |
| 1-5188398-9 | TE Connectivity AMP | 110 | 2.00 | 5 | 1.5 | 500 | -55 to 125 | Gold (30.0µin) | Active | ROHS3 Compliant |
| 17011102204 | HARTING | 110 | 2.00 | 5 | 1.0 | — | -55 to 125 | Gold or Gold-Palladium | Active | ROHS3 Compliant |
| 17011102402 | HARTING | 110 | 2.00 | 5 | 1.0 | — | -55 to 125 | Gold or Gold-Palladium | Active | ROHS3 Compliant |
| 17011104201 | HARTING | 110 | 2.00 | 5 | 1.0 | — | -55 to 125 | Gold or Gold-Palladium | Active | ROHS3 Compliant |
| 3-5100143-0 | TE Connectivity AMP | 110 | 2.00 | 5 | 1.5 | 500 | -55 to 125 | Gold (30.0µin) | Active | RoHS Compliant |
| 5100143-1 | TE Connectivity AMP | 110 | 2.00 | 5 | 1.5 | 500 | -55 to 125 | Gold (30.0µin) | Active | ROHS3 Compliant |
| 5106164-1 | TE Connectivity AMP | 110 | 2.00 | 5 | 1.5 | 500 | -55 to 125 | Gold (30.0µin) | Active | ROHS3 Compliant |
| 5106413-1 | TE Connectivity AMP | 110 | 2.00 | 5 | 1.5 | 500 | -55 to 125 | Gold (30.0µin) | Active | ROHS3 Compliant |
Engineering Selection Recommendations
For Direct Replacement (Same Form Factor): HM2P07PDP221N9LF is the active equivalent from Amphenol ICC (FCI). It maintains the 154-position configuration and identical electrical specifications while providing RoHS compliance and active product status. This part is suitable for designs requiring the complete 154-position connector footprint.
For 110-Position Core Applications: TE Connectivity Z-PACK series (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1) and HARTING har-bus® HM series (17011102204, 17011102402, 17011104201) provide active alternatives with ROHS3 compliance. TE Connectivity parts maintain 1.5A current rating and 500Vrms voltage rating. HARTING parts specify 1.0A current rating with unspecified voltage rating. All maintain 2.00mm pitch, through-hole press-fit termination, and -55°C to 125°C operating range.
Selection between TE Connectivity and HARTING alternatives depends on current and voltage requirements of the application. TE Connectivity parts are recommended where 1.5A current capacity is required. HARTING parts are suitable for applications with 1.0A maximum current draw.
Frequently Asked Questions (FAQ)
Q: Can a 110-position connector substitute for the 154-position HM2P07PDP221N9? A: Yes, if the application uses only the 110 primary signal positions. The 44 ground positions in the original connector are supplementary. Verify that your PCB layout and connector socket accommodate the 110-position configuration before substitution.
Q: What is the difference between TE Connectivity and HARTING 110-position alternatives? A: TE Connectivity Z-PACK parts (5100143 series, 5106164-1, 5106413-1) support 1.5A current and 500Vrms voltage. HARTING har-bus® HM parts (17011102204, 17011102402, 17011104201) support 1.0A current with unspecified voltage rating. Both maintain 2.00mm pitch and identical mounting specifications. Select based on your application's current and voltage requirements.
Q: Is HM2P07PDP221N9LF a direct replacement for HM2P07PDP221N9? A: Yes. HM2P07PDP221N9LF is the active production equivalent with identical electrical and mechanical specifications. The primary differences are active product status and RoHS compliance. Packaging differs (Tray vs. unspecified), but electrical performance is equivalent.
Q: What does the "LF" suffix in HM2P07PDP221N9LF indicate? A: The "LF" suffix indicates lead-free termination and RoHS compliance. This is the current production version of the Amphenol ICC (FCI) Millipacs® 154-position connector.
Q: Are all substitute parts rated for the same temperature range? A: Yes. All listed alternatives operate across -55°C to 125°C, matching the original HM2P07PDP221N9 specification.
Q: Which substitute parts have the highest inventory availability? A: 5100143-1 (TE Connectivity) has 3040 units in stock. 17011104201 (HARTING) has 1061 units. 1-5188398-9 (TE Connectivity) has 922 units. Verify current inventory status with your supplier before final selection.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts