Request Quote
(Ships tomorrow)
HM2P07PDP120N9 Equivalent & Substitute Parts
Part Overview
The HM2P07PDP120N9 is a 110-position header connector with male pins, manufactured by Amphenol ICC (FCI) under the Millipacs® series. This backplane connector features a 0.079" (2.00mm) pitch, through-hole press-fit termination, and gold contact finish rated for 1.5 A at 750Vrms across an operating temperature range of -55°C to 125°C. The part is classified as obsolete, making equivalent substitutes necessary for ongoing design requirements and procurement continuity.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Type | Header, Male Pins |
| Number of Positions | 110 |
| Pitch | 0.079" (2.00mm) |
| Number of Rows | 5 |
| Mounting Type | Through Hole |
| Termination | Press-Fit |
| Contact Finish | Gold |
| Current Rating | 1.5 A |
| Voltage Rating | 750Vrms |
| Operating Temperature | -55°C to 125°C |
| Features | Board Guide |
Substitute Part Grouping Explanation
Substitution eligibility is determined by strict alignment of the following parameters: connector type (header, male pins), position count (110), pitch (2.00mm), row configuration (5 rows), mounting method (through hole), termination style (press-fit), contact finish (gold), operating temperature range (-55°C to 125°C), and board guide feature presence.
Substitute parts are grouped into two categories based on electrical performance:
Category A: Full Electrical Equivalence (1.5 A Rating) Parts maintaining the original 1.5 A current rating: 1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1, 5188398-9. These parts are sourced from TE Connectivity AMP Connectors (Z-PACK series) and are all active products with ROHS3 compliance.
Category B: Reduced Electrical Performance (1 A Rating) Parts with reduced current rating of 1 A: 17011102204, 17011102402, 17011104201. These parts are manufactured by HARTING (har-bus® HM series) and are active products with ROHS3 compliance.
Parameter Comparison
| Manufacturer Part Number | Manufacturer | Series | Positions | Pitch | Rows | Current Rating (A) | Voltage Rating | Operating Temp | Product Status | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|---|
| HM2P07PDP120N9 | Amphenol ICC (FCI) | Millipacs® | 110 | 0.079" (2.00mm) | 5 | 1.5 | 750Vrms | -55°C to 125°C | Obsolete | Non-compliant |
| 1-5100143-9 | TE Connectivity AMP | Z-PACK | 110 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C to 125°C | Active | ROHS3 Compliant |
| 1-5188398-9 | TE Connectivity AMP | Z-PACK | 110 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C to 125°C | Active | ROHS3 Compliant |
| 17011102204 | HARTING | har-bus® HM | 110 | 0.079" (2.00mm) | 5 | 1 | Not specified | -55°C to 125°C | Active | ROHS3 Compliant |
| 17011102402 | HARTING | har-bus® HM | 110 | 0.079" (2.00mm) | 5 | 1 | Not specified | -55°C to 125°C | Active | ROHS3 Compliant |
| 17011104201 | HARTING | har-bus® HM | 110 | 0.079" (2.00mm) | 5 | 1 | Not specified | -55°C to 125°C | Active | ROHS3 Compliant |
| 3-5100143-0 | TE Connectivity AMP | Z-PACK | 110 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C to 125°C | Active | RoHS Compliant |
| 5100143-1 | TE Connectivity AMP | Z-PACK | 110 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C to 125°C | Active | ROHS3 Compliant |
| 5106164-1 | TE Connectivity AMP | Z-PACK | 110 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C to 125°C | Active | ROHS3 Compliant |
| 5106413-1 | TE Connectivity AMP | Z-PACK | 110 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C to 125°C | Active | ROHS3 Compliant |
| 5188398-9 | TE Connectivity AMP | Z-PACK | 110 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C to 125°C | Active | RoHS Compliant |
Engineering Selection Recommendations
For applications requiring full electrical equivalence to the HM2P07PDP120N9, select from TE Connectivity AMP Connectors Z-PACK series parts: 1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1, or 5188398-9. All maintain the 1.5 A current rating and are active products with ROHS3 compliance, providing regulatory continuity and long-term availability.
Note that TE Connectivity substitutes operate at 500Vrms versus the original 750Vrms rating. Verify voltage requirements in your application before selection.
For applications where 1 A current rating is acceptable, HARTING har-bus® HM series parts (17011102204, 17011102402, 17011104201) are active alternatives with ROHS3 compliance. These parts do not specify voltage rating in available documentation.
All substitute parts share identical mechanical configuration (110 positions, 2.00mm pitch, 5 rows, through-hole press-fit, board guide feature) and operating temperature range (-55°C to 125°C), ensuring PCB layout and thermal performance compatibility.
Frequently Asked Questions (FAQ)
Q: Can I use a HARTING part as a direct replacement for the HM2P07PDP120N9? A: HARTING parts 17011102204, 17011102402, and 17011104201 are mechanically compatible but have a reduced current rating of 1 A compared to the original 1.5 A. Use only if your circuit design operates within 1 A maximum current per pin.
Q: What is the difference between TE Connectivity Z-PACK parts in the substitute list? A: All TE Connectivity Z-PACK substitutes (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1, 5188398-9) share identical electrical and mechanical specifications. Selection may be based on packaging availability, inventory status, or contact finish thickness specifications (30.0µin / 0.76µm where specified).
Q: Why is the voltage rating lower on TE Connectivity substitutes (500Vrms vs. 750Vrms)? A: The voltage rating difference reflects design specifications of the Z-PACK series. Confirm your application voltage requirements do not exceed 500Vrms before selecting TE Connectivity alternatives.
Q: Are all substitute parts RoHS compliant? A: All active substitute parts listed are ROHS3 compliant or RoHS compliant. The original HM2P07PDP120N9 is RoHS non-compliant due to its obsolete status.
Q: What does "Board Guide" feature mean? A: Board guide is a mechanical feature that aids connector alignment during PCB assembly. All listed parts include this feature, ensuring consistent assembly performance.
Q: Can I mix substitute parts from different manufacturers in the same design? A: Yes, all substitute parts maintain identical mechanical pitch (2.00mm), position count (110), row configuration (5), and mounting method (through-hole press-fit). Electrical performance differences (1.5 A vs. 1 A) must be evaluated per circuit requirements.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts