HM2P07PDM350N9LF Equivalent & Substitute Parts

Part Overview

The HM2P07PDM350N9LF is a 110-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole press-fit connector operates across -55°C to 125°C with a 750Vrms rating and 1.5A current capacity. The connector features a 2.00mm pitch configuration across 5 rows with gold-plated contacts and board guide support. As an active product with RoHS compliance and unlimited moisture sensitivity rating, equivalent and substitute parts are identified for design flexibility, supply chain optimization, and application-specific requirements.

Substiute Parts

HM2P07PDM350N9LF

Amphenol ICC (FCI)In Stock: 729HM2P07PDM350N9LF Datasheet

Current PartRFQ

17011102201

HARTINGIn Stock: 193117011102201 Datasheet

MFR RecommendedRFQ

17011102204

HARTINGIn Stock: 105717011102204 Datasheet

MFR RecommendedRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

5100143-1

TE Connectivity AMP ConnectorsIn Stock: 31345100143-1 Datasheet

MFR RecommendedRFQ

PCN21B-110PB-2PF-G

Hirose Electric Co LtdIn Stock: 1154PCN21B-110PB-2PF-G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDM350N9LF is determined by the following critical parameters:

Primary Matching Criteria:

• Number of Positions: 110
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Connector Type: Header, Male Pins
• Connector Style: A 22
• Mounting Type: Through Hole
• Termination: Press-Fit
• Operating Temperature Range: -55°C ~ 125°C

Secondary Compatibility Factors:

• Contact Finish: Gold or Gold-Palladium
• Current Rating: 1.5 A minimum
• Voltage Rating: 500Vrms minimum
• RoHS Compliance: Required
• MSL Rating: 1 (Unlimited)

Substitute parts meeting all primary criteria and secondary compatibility factors are classified as direct equivalents. Parts with reduced voltage or current ratings, different position counts, or alternative row configurations are listed as functional alternatives with specific application constraints.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (Recommended for New Designs):

5100143-1 (TE Connectivity AMP Connectors, Z-PACK series) is the primary direct equivalent. This part maintains identical position count, pitch, row configuration, and connector style with matching 1.5A current rating and 500Vrms voltage specification. Both parts feature gold contact finish, through-hole press-fit termination, and ROHS3 compliance. The 5100143-1 offers superior voltage margin (500Vrms vs. 750Vrms requirement) and is actively produced with 3040 units in stock.

Functional Alternatives (Application-Dependent):

HARTING har-bus® HM series parts (17011102201, 17011102204, 17011102402) provide mechanical and electrical compatibility across all primary parameters. These parts feature identical position count, pitch, row configuration, and connector style. However, current rating is reduced to 1.0A, and voltage specifications are not provided. These alternatives are suitable for applications with current requirements below 1.0A and where voltage margins exceed 750Vrms. All three HARTING variants are actively produced with combined inventory exceeding 2900 units.

Constrained Alternative (Legacy Applications Only):

PCN21B-110PB-2PF-G (Hirose Electric, PCN21 series) is classified as obsolete and features a different connector style (B 22 vs. A 22) with increased position count (154 vs. 110) due to integrated ground plate configuration. Voltage rating is reduced to 300V. This part is suitable only for legacy system maintenance where connector style compatibility is not critical and voltage requirements are below 300V.

Frequently Asked Questions (FAQ)

Q: Can HARTING 17011102201, 17011102204, or 17011102402 be used as direct replacements for HM2P07PDM350N9LF?

A: These parts are mechanically and electrically compatible for applications with current requirements at or below 1.0A. The primary limitation is reduced current rating (1.0A vs. 1.5A). Voltage specifications for HARTING parts are not provided; applications requiring 750Vrms operation should use 5100143-1 instead.

Q: What is the difference between the three HARTING substitute parts?

A: All three HARTING parts (17011102201, 17011102204, 17011102402) share identical electrical and mechanical specifications. Differences are limited to packaging (all supplied in tubes) and inventory levels. Selection among these three is based on availability and supply chain requirements only.

Q: Is PCN21B-110PB-2PF-G suitable for new designs?

A: No. This part is obsolete and features a different connector style (B 22) with integrated ground plate configuration (154 total positions vs. 110 signal positions). Voltage rating is reduced to 300V. Use only for legacy system maintenance where connector style compatibility is not a design constraint.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by: 110-position count, 2.00mm pitch, 5-row configuration, A 22 connector style, through-hole mounting, press-fit termination, and -55°C to 125°C operating range. Current rating must be 1.5A minimum and voltage rating must be 500Vrms minimum for direct equivalency. RoHS compliance and MSL 1 rating are required.

Q: Can I use 5100143-1 in place of HM2P07PDM350N9LF without design modifications?

A: Yes. The 5100143-1 meets all primary and secondary compatibility criteria with identical position count, pitch, row configuration, connector style, current rating, and operating temperature range. Voltage rating (500Vrms) provides adequate margin for 750Vrms applications. No design modifications are required.

Q: What packaging formats are available for substitute parts?

A: HM2P07PDM350N9LF is supplied in trays. HARTING equivalents (17011102201, 17011102204, 17011102402) are supplied in tubes. TE Connectivity 5100143-1 is supplied in tubes. Hirose PCN21B-110PB-2PF-G is supplied in bulk. Packaging selection should align with assembly process requirements and inventory management protocols.