HM2P07PDM2F5N9LF Equivalent & Substitute Parts

Part Overview

The HM2P07PDM2F5N9LF is a 132-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This press-fit through-hole connector features 110 signal positions plus 22 ground positions arranged in a 5+1 row configuration with 2.00mm pitch. The part is currently active in production and available in tray packaging with 871 units in stock.

Substitute parts become necessary when the original part reaches end-of-life status, when alternative sourcing improves supply chain resilience, or when design requirements allow for compatible alternatives that meet electrical and mechanical specifications.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	132 (110 + 22 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 1
Mounting Type	Through Hole
Termination	Press-Fit
Contact Finish	Gold
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C ~ 125°C
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDM2F5N9LF is determined by the following critical parameters:

Connector Type & Style: Header, Male Pins with Connector Style A 22
Pitch: 0.079" (2.00mm) spacing
Mounting & Termination: Through Hole with Press-Fit termination
Operating Temperature Range: -55°C ~ 125°C
Electrical Ratings: Current rating of 1.5 A and voltage rating of 750Vrms or higher
Compliance: RoHS compliance status and MSL rating

The substitute parts identified fall into two categories:

Category 1 - Reduced Position Count (110 positions): HARTING 17011102204, HARTING 17011102402, TE Connectivity 5100143-1, and TE Connectivity 5106164-1. These parts maintain the same pitch, mounting type, and termination method but with 110 signal positions (no dedicated ground row). These are suitable when the application does not require the additional 22 ground positions.

Category 2 - Increased Position Count (154 positions): Hirose Electric PCN21B-110PB-2PF-G with 154 total positions (110 signal + 44 ground) in a 5+2 row configuration. This part accommodates applications requiring additional ground connections.

Parameter Comparison

Parameter	HM2P07PDM2F5N9LF (Main)	17011102204 (HARTING)	17011102402 (HARTING)	5100143-1 (TE)	5106164-1 (TE)	PCN21B-110PB-2PF-G (Hirose)
Manufacturer	Amphenol ICC (FCI)	HARTING	HARTING	TE Connectivity	TE Connectivity	Hirose Electric
Number of Positions	132 (110 + 22)	110	110	110	110	154 (110 + 44)
Number of Rows	5 + 1	5	5	5	5	5 + 2
Pitch	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)
Connector Type	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins
Connector Style	A 22	A 22	A 22	A 22	A 22	B 22
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit
Contact Finish	Gold (Flash)	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold (30.0µin)	Gold (30.0µin)	Gold (31.5µin)
Current Rating	1.5 A	1.0 A	1.0 A	1.5 A	1.5 A	1.5 A
Voltage Rating	750Vrms	Not specified	Not specified	500Vrms	500Vrms	300V
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active	Active	Obsolete
Packaging	Tray	Tube	Tube	Tube	Tube	Bulk
Inventory	871 Pcs	1042 Pcs	885 Pcs	3040 Pcs	1516 Pcs	1117 Pcs

Engineering Selection Recommendations

For applications requiring 110 signal positions with reduced ground connectivity:

TE Connectivity 5100143-1 and 5106164-1 are preferred substitutes. Both maintain the 1.5 A current rating of the original part and exceed the voltage requirement at 500Vrms. Both are ROHS3 compliant and active in production. The 5106164-1 includes an alignment strip feature in addition to the board guide. These parts are suitable when the application design can accommodate a reduction from 22 dedicated ground positions to the ground distribution inherent in a 110-position configuration.

HARTING 17011102204 and 17011102402 are alternative substitutes with the same 110-position configuration. Both are ROHS3 compliant and active. However, both specify a 1.0 A current rating and do not provide voltage rating specifications. These parts are suitable only for applications where the 1.0 A current rating is sufficient and voltage requirements are not critical.

For applications requiring increased ground connectivity:

Hirose Electric PCN21B-110PB-2PF-G provides 154 total positions with 44 dedicated ground positions. This part maintains the 1.5 A current rating and 2.00mm pitch. However, this part is marked as obsolete and carries a lower voltage rating of 300V compared to the original 750Vrms specification. Selection of this part requires confirmation that the reduced voltage rating is acceptable for the application. The connector style differs (B 22 versus A 22), which may affect mechanical compatibility.

Compliance and Regulatory Status:

All active substitute parts maintain RoHS compliance and MSL 1 rating. TE Connectivity parts 5100143-1 and 5106164-1 have undefined or unaffected REACH status, while HARTING parts are REACH unaffected. The Hirose part is RoHS compliant but REACH status is not specified in the provided data.

Frequently Asked Questions (FAQ)

Q: Can I use a 110-position substitute in place of the 132-position HM2P07PDM2F5N9LF?

A: Substitution is possible only if your application design does not require the 22 dedicated ground positions provided by the original part. The 110-position alternatives maintain the same 2.00mm pitch, through-hole mounting, and press-fit termination. PCB layout and connector footprint must be verified for compatibility.

Q: What is the difference between the HARTING and TE Connectivity 110-position options?

A: The primary difference is current rating. TE Connectivity 5100143-1 and 5106164-1 maintain the 1.5 A rating of the original part, while HARTING 17011102204 and 17011102402 are rated at 1.0 A. TE Connectivity parts also specify voltage ratings (500Vrms), whereas HARTING parts do not provide voltage specifications. TE Connectivity 5106164-1 includes an alignment strip feature.

Q: Why is the Hirose PCN21B-110PB-2PF-G marked as obsolete?

A: Obsolete status indicates the part is no longer in active production. While inventory is currently available (1117 units), future availability cannot be guaranteed. This part should be selected only when the increased position count (154 total) and additional ground connectivity justify the obsolescence risk and reduced voltage rating (300V versus 750Vrms).

Q: Are there mechanical compatibility concerns when switching between manufacturers?

A: All substitute parts maintain the same 2.00mm pitch and through-hole press-fit termination. However, connector style differs for the Hirose part (B 22 versus A 22 for other parts). Physical dimensions, keying features, and board guide specifications may vary between manufacturers. PCB footprint and connector cavity design must be verified before implementation.

Q: What packaging formats are available for these substitutes?

A: The original HM2P07PDM2F5N9LF is supplied in tray packaging. HARTING and TE Connectivity substitutes are supplied in tube packaging. The Hirose substitute is supplied in bulk packaging. Packaging format may affect handling, storage, and integration into assembly processes.

Q: Do all substitutes meet the original voltage and current specifications?

A: No. TE Connectivity 5100143-1 and 5106164-1 meet the 1.5 A current requirement but specify 500Vrms (lower than the original 750Vrms). HARTING parts specify 1.0 A (lower than the original 1.5 A) and do not provide voltage ratings. The Hirose part specifies 1.5 A current but only 300V (significantly lower than 750Vrms). Application requirements must be verified against each substitute's electrical ratings.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message