Request Quote
(Ships tomorrow)
HM2P07PDM2F5N9 Equivalent & Substitute Parts
Part Overview
The HM2P07PDM2F5N9 is a 132-position (110 + 22 ground) header connector manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole, press-fit backplane connector operates at 1.5 A current rating and 750 Vrms voltage rating across a temperature range of -55°C to 125°C. The part is currently obsolete, necessitating identification of active equivalent and substitute components for new designs or replacement applications.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Type | Header, Male Pins |
| Number of Positions | 132 (110 + 22 Ground) |
| Pitch | 0.079" (2.00mm) |
| Number of Rows | 5 + 1 |
| Mounting Type | Through Hole |
| Termination | Press-Fit |
| Current Rating | 1.5 A |
| Voltage Rating | 750 Vrms |
| Operating Temperature | -55°C to 125°C |
| Contact Finish | Gold (Flash) |
| Features | Board Guide |
Substitute Part Grouping Explanation
Substitution for the HM2P07PDM2F5N9 is determined by the following critical parameters:
- Connector Type & Style: Header, Male Pins, Connector Style A 22
- Pitch & Position Configuration: 0.079" (2.00mm) pitch with 110-position or 132-position loading
- Mounting & Termination: Through-hole press-fit construction
- Electrical Ratings: Current rating of 1.5 A and voltage rating of 500 Vrms or higher
- Operating Temperature Range: -55°C to 125°C
- Contact Finish: Gold plating
- Compliance Status: RoHS3 compliance preferred for active parts
Substitutes are grouped into two categories:
Category 1 - Direct Equivalent (132-Position): HM2P07PDM2F5N9LF maintains identical position count and electrical specifications with active product status and RoHS3 compliance.
Category 2 - Functional Equivalent (110-Position): Parts from TE Connectivity (Z-PACK series) and HARTING (har-bus® HM series) provide 110-position configurations with compatible pitch, mounting, and termination. These parts meet or exceed the electrical requirements and operate within the same temperature range.
Parameter Comparison
| Part Number | Manufacturer | Positions | Rows | Pitch | Current Rating (A) | Voltage Rating (Vrms) | Temp Range (°C) | Product Status | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|
| HM2P07PDM2F5N9 | Amphenol ICC (FCI) | 132 | 5 + 1 | 0.079" (2.00mm) | 1.5 | 750 | -55 to 125 | Obsolete | Non-compliant |
| HM2P07PDM2F5N9LF | Amphenol ICC (FCI) | 132 | 5 + 1 | 0.079" (2.00mm) | 1.5 | 750 | -55 to 125 | Active | Compliant |
| 1-5100143-9 | TE Connectivity AMP | 110 | 5 | 0.079" (2.00mm) | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
| 1-5188398-9 | TE Connectivity AMP | 110 | 5 | 0.079" (2.00mm) | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
| 3-5100143-0 | TE Connectivity AMP | 110 | 5 | 0.079" (2.00mm) | 1.5 | 500 | -55 to 125 | Active | Compliant |
| 5100143-1 | TE Connectivity AMP | 110 | 5 | 0.079" (2.00mm) | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
| 5106164-1 | TE Connectivity AMP | 110 | 5 | 0.079" (2.00mm) | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
| 5106413-1 | TE Connectivity AMP | 110 | 5 | 0.079" (2.00mm) | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
| 17011102204 | HARTING | 110 | 5 | 0.079" (2.00mm) | 1.0 | — | -55 to 125 | Active | ROHS3 Compliant |
| 17011102402 | HARTING | 110 | 5 | 0.079" (2.00mm) | 1.0 | — | -55 to 125 | Active | ROHS3 Compliant |
| 17011104201 | HARTING | 110 | 5 | 0.079" (2.00mm) | 1.0 | — | -55 to 125 | Active | ROHS3 Compliant |
Engineering Selection Recommendations
For Direct Replacement (132-Position Requirement): HM2P07PDM2F5N9LF is the primary choice. It maintains identical electrical and mechanical specifications as the obsolete HM2P07PDM2F5N9 while offering active product status and RoHS3 compliance. This part is suitable for applications requiring the full 132-position configuration without design modification.
For Functional Substitution (110-Position Acceptable): TE Connectivity Z-PACK series parts (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1) are active alternatives with ROHS3 compliance. These connectors provide 110-position loading with identical pitch, mounting type, and termination method. Current rating remains at 1.5 A with 500 Vrms voltage rating, meeting or exceeding the original specification. 5106164-1 includes an alignment strip feature in addition to board guide.
For Alternative Sourcing (110-Position with Lower Current Rating): HARTING har-bus® HM series parts (17011102204, 17011102402, 17011104201) offer 110-position configurations with identical pitch and mounting. These parts carry a 1.0 A current rating and operate within the same temperature range. Selection depends on application current requirements and voltage specification availability.
Frequently Asked Questions (FAQ)
Q: Can HM2P07PDM2F5N9LF be used as a direct replacement for HM2P07PDM2F5N9? A: Yes. HM2P07PDM2F5N9LF is the active equivalent with identical electrical and mechanical specifications. The primary difference is product status (active vs. obsolete) and RoHS3 compliance. Packaging differs (tray vs. unspecified), but connector specifications remain unchanged.
Q: What is the difference between 132-position and 110-position substitutes? A: The original HM2P07PDM2F5N9 contains 132 positions (110 signal + 22 ground). Substitute parts from TE Connectivity and HARTING provide 110-position configurations. This represents a reduction in ground pin count. Selection depends on whether the application requires the additional ground pins or can function with the 110-position layout.
Q: Are TE Connectivity and HARTING parts electrically compatible? A: Both manufacturers' parts share identical pitch (0.079" / 2.00mm), connector style (A 22), mounting type (through-hole press-fit), and operating temperature range (-55°C to 125°C). TE Connectivity parts maintain 1.5 A current rating with 500 Vrms voltage rating. HARTING parts carry 1.0 A current rating. Voltage rating for HARTING parts is not specified. Selection should be based on application current requirements.
Q: What does RoHS3 compliance mean for this connector? A: RoHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements. The original HM2P07PDM2F5N9 is RoHS non-compliant. All active substitutes listed are RoHS3 compliant, making them suitable for applications with regulatory compliance requirements.
Q: Does 5106164-1 differ from other TE Connectivity substitutes? A: 5106164-1 includes both an alignment strip and board guide features, compared to board guide only on other TE Connectivity parts. All other electrical and mechanical specifications remain identical. The alignment strip provides additional positioning precision during assembly.
Q: Can HARTING parts be used if current rating is lower (1.0 A vs. 1.5 A)? A: HARTING parts are suitable only for applications where the maximum current requirement does not exceed 1.0 A. If the application requires 1.5 A operation, TE Connectivity or Amphenol ICC parts must be selected.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts