HM2P07PDM2C5N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDM2C5N9 is a 132-position (110 + 22 ground) header connector manufactured by Amphenol ICC (FCI) in the Millipacs® series. This backplane connector features male pins with 0.079" (2.00mm) pitch, press-fit termination, and through-hole mounting. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new designs requiring compatible backplane connectivity solutions.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	132 (110 + 22 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 1
Mounting Type	Through Hole
Termination	Press-Fit
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C ~ 125°C
Contact Finish	Gold (Flash)
Connector Style	A 22

Substitute Part Grouping Explanation

Substitution for the HM2P07PDM2C5N9 is determined by the following critical parameters:

Position Count & Ground Configuration: The main part contains 132 positions (110 signal + 22 ground). Substitute parts are grouped into two categories: direct equivalents maintaining 132 positions, and functional alternatives with 110 positions.
Pitch & Row Configuration: All substitutes maintain 0.079" (2.00mm) pitch and 5-row configuration (or 5+1 for ground variants).
Termination & Mounting: Press-fit termination and through-hole mounting are consistent across all substitutes.
Electrical Ratings: Current rating (1.0–1.5 A) and voltage rating (500–750Vrms) define compatibility boundaries.
Contact Finish: Gold or gold-palladium finishes are acceptable across all substitutes.

Category 1 – Direct Equivalent (132 Positions): HM2P07PDM2C5N9LF maintains identical position count and electrical specifications with active product status and improved compliance.

Category 2 – Functional Alternatives (110 Positions): Parts from TE Connectivity (Z-PACK series) and HARTING (har-bus® HM series) provide 110-position configurations suitable for applications not requiring the full 22-position ground array.

Parameter Comparison

Part Number	Manufacturer	Positions	Rows	Pitch	Current (A)	Voltage (Vrms)	Temp Range	Product Status	RoHS Status
HM2P07PDM2C5N9	Amphenol ICC (FCI)	132 (110+22)	5+1	0.079" (2.00mm)	1.5	750	-55 to 125°C	Obsolete	Non-compliant
HM2P07PDM2C5N9LF	Amphenol ICC (FCI)	132 (110+22)	5+1	0.079" (2.00mm)	1.5	750	-55 to 125°C	Active	Compliant
1-5100143-9	TE Connectivity AMP	110	5	0.079" (2.00mm)	1.5	500	-55 to 125°C	Active	ROHS3 Compliant
1-5188398-9	TE Connectivity AMP	110	5	0.079" (2.00mm)	1.5	500	-55 to 125°C	Active	ROHS3 Compliant
17011102204	HARTING	110	5	0.079" (2.00mm)	1.0	—	-55 to 125°C	Active	ROHS3 Compliant
17011102402	HARTING	110	5	0.079" (2.00mm)	1.0	—	-55 to 125°C	Active	ROHS3 Compliant
17011104201	HARTING	110	5	0.079" (2.00mm)	1.0	—	-55 to 125°C	Active	ROHS3 Compliant
3-5100143-0	TE Connectivity AMP	110	5	0.079" (2.00mm)	1.5	500	-55 to 125°C	Active	Compliant
5100143-1	TE Connectivity AMP	110	5	0.079" (2.00mm)	1.5	500	-55 to 125°C	Active	ROHS3 Compliant
5106164-1	TE Connectivity AMP	110	5	0.079" (2.00mm)	1.5	500	-55 to 125°C	Active	ROHS3 Compliant
5106413-1	TE Connectivity AMP	110	5	0.079" (2.00mm)	1.5	500	-55 to 125°C	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Substitute – Direct Equivalent: HM2P07PDM2C5N9LF is the recommended direct substitute. It maintains identical electrical specifications (1.5 A, 750Vrms), position count (132), and mechanical configuration while offering active product status and RoHS compliance. This part is suitable for direct replacement in existing designs.

Secondary Substitutes – 110-Position Alternatives: For applications where the full 132-position configuration is not required, TE Connectivity Z-PACK series parts (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1) provide equivalent electrical performance with 110 positions. These parts maintain 1.5 A current rating and 500Vrms voltage rating, with ROHS3 compliance and active product status.

Alternative Supplier Option: HARTING har-bus® HM series (17011102204, 17011102402, 17011104201) offers 110-position configurations with active status and ROHS3 compliance. Current rating is reduced to 1.0 A, and voltage rating is not specified. These parts are suitable only for applications with lower current requirements.

Compliance Considerations: The original HM2P07PDM2C5N9 is RoHS non-compliant and obsolete. All recommended substitutes are RoHS3 compliant and carry active product status, supporting long-term supply chain stability and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDM2C5N9LF be used as a direct replacement for HM2P07PDM2C5N9? A: Yes. HM2P07PDM2C5N9LF is a direct equivalent with identical electrical and mechanical specifications. The primary differences are active product status and RoHS compliance.

Q: What is the difference between 132-position and 110-position substitutes? A: The original part includes 22 dedicated ground positions in addition to 110 signal positions. 110-position alternatives eliminate the dedicated ground array. Selection depends on whether your application requires the full ground pin configuration.

Q: Are TE Connectivity and HARTING parts interchangeable? A: Both manufacturers provide 110-position, 2.00mm pitch, press-fit connectors with compatible mechanical mounting. However, HARTING parts have a reduced current rating (1.0 A vs. 1.5 A) and unspecified voltage rating. Verify current and voltage requirements before substitution.

Q: What packaging options are available? A: HM2P07PDM2C5N9LF is supplied in Tray packaging. TE Connectivity and HARTING alternatives are supplied in Tube packaging. Confirm packaging requirements for your procurement and assembly processes.

Q: Are all substitutes RoHS compliant? A: Yes. All recommended substitutes carry RoHS3 compliance or RoHS compliance status. The original HM2P07PDM2C5N9 is RoHS non-compliant.

Q: What is the current rating difference between TE Connectivity and HARTING parts? A: TE Connectivity Z-PACK series maintains 1.5 A current rating. HARTING har-bus® HM series is rated for 1.0 A. Applications requiring 1.5 A must use TE Connectivity parts.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message