HM2P07PDK110N9LF Equivalent & Substitute Parts

Part Overview

The HM2P07PDK110N9LF is a 110-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole press-fit connector operates at 1.5 A current rating and 750 Vrms voltage rating across an operating temperature range of -55°C to 125°C. The part is currently active and RoHS compliant. Substitute parts are necessary when the original manufacturer part becomes unavailable, when alternative packaging formats are required, or when design specifications allow for compatible alternatives from qualified manufacturers.

Substiute Parts

HM2P07PDK110N9LF

Amphenol ICC (FCI)In Stock: 1143HM2P07PDK110N9LF Datasheet

Current PartRFQ

17011102204

HARTINGIn Stock: 105717011102204 Datasheet

MFR RecommendedRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

5100143-1

TE Connectivity AMP ConnectorsIn Stock: 31345100143-1 Datasheet

MFR RecommendedRFQ

5106164-1

TE Connectivity AMP ConnectorsIn Stock: 15415106164-1 Datasheet

MFR RecommendedRFQ

PCN21B-110PB-2PF-G

Hirose Electric Co LtdIn Stock: 1154PCN21B-110PB-2PF-G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDK110N9LF is determined by the following critical parameters:

• Number of Positions: 110
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Connector Type: Header, Male Pins
• Connector Style: A 22
• Mounting Type: Through Hole
• Termination: Press-Fit
• Operating Temperature Range: -55°C to 125°C

Substitute parts must match these core parameters to ensure mechanical and electrical compatibility. Current rating and voltage rating variations are acceptable when the substitute part meets or exceeds the application requirements. Contact finish and packaging format may differ based on design flexibility and availability constraints.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Recommended for New Designs):

The HARTING 17011102204 and 17011102402 (har-bus® HM series) are mechanically and electrically compatible with the HM2P07PDK110N9LF. Both parts maintain identical position count, pitch, row configuration, and operating temperature range. ROHS3 compliance provides enhanced regulatory alignment for current manufacturing standards. Current rating of 1 A is lower than the original 1.5 A specification; applications requiring the full 1.5 A rating should select TE Connectivity alternatives.

The TE Connectivity 5100143-1 and 5106164-1 (Z-PACK series) provide full electrical equivalence with 1.5 A current rating and maintain all mechanical compatibility parameters. The 5106164-1 includes an alignment strip feature in addition to the board guide. Both parts are ROHS3 compliant and suitable for active production designs.

Limited Substitution (Conditional Use):

The Hirose PCN21B-110PB-2PF-G is mechanically compatible but differs in connector style (B 22 vs. A 22) and includes additional ground positions (154 total vs. 110). This part is marked as obsolete and carries a lower voltage rating of 300 V. Use only when design specifications explicitly accommodate the increased position count and connector style variation.

Compliance Considerations:

All substitute parts maintain the required operating temperature range of -55°C to 125°C. RoHS and REACH compliance status varies; verify regulatory requirements for your specific application region and end-use classification.

Frequently Asked Questions (FAQ)

Q: Can I substitute a HARTING part for the Amphenol ICC HM2P07PDK110N9LF?

A: Yes. HARTING 17011102204 and 17011102402 are mechanically and electrically compatible. Both maintain the 110-position, 2.00mm pitch, 5-row configuration and press-fit termination. Current rating is 1 A versus the original 1.5 A; verify your application does not exceed 1 A before substitution.

Q: What is the difference between the TE Connectivity 5100143-1 and 5106164-1?

A: Both parts are electrically and mechanically equivalent with 1.5 A current rating and 500 Vrms voltage rating. The 5106164-1 includes an alignment strip feature in addition to the board guide. Select based on mechanical assembly requirements.

Q: Why is the Hirose PCN21B-110PB-2PF-G listed as a substitute if it has a different connector style?

A: The Hirose part maintains core mechanical compatibility (pitch, mounting type, termination) but differs in connector style (B 22 vs. A 22) and includes additional ground positions. It is listed as a substitute only for applications where design specifications allow for these variations. The part is obsolete and carries a lower voltage rating of 300 V.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (tray, tube, bulk) does not affect electrical or mechanical performance. Selection is based on procurement, storage, and assembly process requirements.

Q: Are all substitute parts RoHS compliant?

A: All listed substitutes are RoHS compliant or ROHS3 compliant. Verify specific REACH and regional compliance requirements for your application before final part selection.