HM2P07PDF310N9LF Equivalent & Substitute Parts

Part Overview

The HM2P07PDF310N9LF is a 110-position backplane connector header manufactured by Amphenol ICC (FCI) under the Millipacs® series. This through-hole press-fit connector features a 2.00mm pitch configuration with 5 rows of male pins and gold-plated contacts rated for 1.5A at 750Vrms. The connector is designed for applications requiring high-density interconnection in industrial and telecommunications equipment. As an active product with full RoHS compliance and unlimited moisture sensitivity rating, equivalent alternatives exist to support supply chain flexibility and design redundancy.

Substiute Parts

HM2P07PDF310N9LF

Amphenol ICC (FCI)In Stock: 796HM2P07PDF310N9LF Datasheet

Current PartRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDF310N9LF is determined by strict alignment of the following critical parameters:

• Position Count & Pitch: 110 positions at 0.079" (2.00mm) spacing
• Physical Configuration: 5-row header with male pins
• Mounting & Termination: Through-hole press-fit assembly
• Electrical Performance: Current and voltage ratings within acceptable operating range
• Environmental Compliance: RoHS status and operating temperature range
• Contact Material: Gold or gold-palladium plating for signal integrity

The substitute part 17011102402 (HARTING har-bus® HM series) meets all critical dimensional and functional parameters. Variations in contact finish thickness, current rating tolerance, and packaging format do not preclude functional equivalence in standard backplane applications.

Parameter Comparison

Engineering Selection Recommendations

Both the HM2P07PDF310N9LF and 17011102402 are active products with current manufacturing support and full regulatory compliance. The Amphenol ICC part carries a higher current rating (1.5A vs. 1.0A) and explicit voltage specification (750Vrms), making it suitable for higher-power backplane applications. The HARTING substitute maintains identical mechanical and thermal specifications with equivalent RoHS3 compliance, supporting applications where current demand does not exceed 1.0A. Selection between these parts should be based on application current requirements and existing supply chain relationships. Both connectors feature board guide functionality and support unlimited moisture sensitivity environments.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 17011102402 replace the Amphenol ICC HM2P07PDF310N9LF in all applications?

A: Functional replacement is valid for applications requiring ≤1.0A current draw. Applications exceeding 1.0A should retain the Amphenol ICC part due to its 1.5A rating. Both parts share identical pitch, position count, row configuration, and mounting specifications.

Q: What is the significance of the different packaging formats (Tray vs. Tube)?

A: Packaging format affects handling, storage, and automated assembly compatibility. Tray packaging typically supports higher-speed pick-and-place operations, while tube packaging is suitable for manual assembly and lower-volume production. Connector functionality remains unchanged.

Q: Are the contact finish specifications interchangeable?

A: Both gold and gold-palladium finishes provide equivalent signal integrity and corrosion resistance for standard backplane applications. The HARTING part's flexible finish specification does not impact electrical performance or reliability in typical operating conditions.

Q: Do both parts meet current environmental and compliance standards?

A: Yes. The Amphenol ICC part is RoHS Compliant, while the HARTING part is ROHS3 Compliant. Both are REACH-classified and carry EAR99 ECCN designation. Both support unlimited moisture sensitivity (MSL 1) environments.

Q: What is the practical difference in voltage rating specification?

A: The Amphenol ICC part explicitly specifies 750Vrms operation. The HARTING part does not provide voltage specification in available documentation. For applications requiring explicit voltage rating confirmation, the Amphenol ICC part is the primary selection.