HM2P07PDF2K0N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDF2K0N9 is a 110-position header connector with male pins, 2.00mm pitch, designed for through-hole press-fit mounting in backplane applications. Manufactured by Amphenol ICC (FCI) under the Millipacs® series, this connector operates across -55°C to 125°C with a 1.5A current rating and 750Vrms voltage rating. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for new designs and production continuity.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	110
Pitch	0.079" (2.00mm)
Number of Rows	5
Mounting Type	Through Hole
Termination	Press-Fit
Contact Finish	Gold
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C to 125°C
Connector Style	A 22
Features	Board Guide
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Connector Configuration: 110 positions, 5 rows, 2.00mm pitch, male pins, header style A 22
Mounting & Termination: Through-hole press-fit mounting
Electrical Performance: Current rating minimum 1.5A, voltage rating minimum 500Vrms (note: original part rated 750Vrms)
Environmental Compliance: Operating temperature -55°C to 125°C, MSL 1
Contact Material: Gold finish

All substitute parts listed maintain these core parameters. Variations in contact finish thickness, RoHS compliance status, and manufacturer do not affect functional interchangeability for the specified electrical and mechanical requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Series	Product Status	Current Rating (A)	Voltage Rating (Vrms)	Contact Finish Thickness	RoHS Status	Inventory (Pcs)
HM2P07PDF2K0N9	Amphenol ICC (FCI)	Millipacs®	Obsolete	1.5	750	Flash	Non-compliant	749
1-5100143-9	TE Connectivity AMP	Z-PACK	Active	1.5	500	—	ROHS3 Compliant	725
1-5188398-9	TE Connectivity AMP	Z-PACK	Active	1.5	500	30.0µin (0.76µm)	ROHS3 Compliant	922
17011102402	HARTING	har-bus® HM	Active	1.0	—	—	ROHS3 Compliant	885
3-5100143-0	TE Connectivity AMP	Z-PACK	Active	1.5	500	30.0µin (0.76µm)	RoHS Compliant	1050
5100143-1	TE Connectivity AMP	Z-PACK	Active	1.5	500	30.0µin (0.76µm)	ROHS3 Compliant	3040
5106164-1	TE Connectivity AMP	Z-PACK	Active	1.5	500	30.0µin (0.76µm)	ROHS3 Compliant	1516
5106413-1	TE Connectivity AMP	Z-PACK	Active	1.5	500	30.0µin (0.76µm)	ROHS3 Compliant	1118
5188398-9	TE Connectivity AMP	Z-PACK	Active	1.5	500	30.0µin (0.76µm)	RoHS Compliant	853
5188731-1	TE Connectivity AMP	Z-PACK	Active	1.5	500	30.0µin (0.76µm)	RoHS Compliant	958
5188733-1	TE Connectivity AMP	Z-PACK	Active	1.5	500	30.0µin (0.76µm)	RoHS Compliant	797

Engineering Selection Recommendations

Primary Substitutes (Full Electrical Equivalence)

Parts 1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1, 5188398-9, 5188731-1, and 5188733-1 are direct functional equivalents. All are manufactured by TE Connectivity AMP under the Z-PACK series, maintain 1.5A current rating and 500Vrms voltage rating, and are classified as active products. These parts carry ROHS3 or RoHS compliance certification, addressing regulatory requirements absent in the obsolete original part.

Secondary Substitute (Reduced Current Rating)

Part 17011102402 (HARTING har-bus® HM series) maintains mechanical and thermal compatibility but operates at 1.0A current rating versus the original 1.5A specification. This part is suitable only for applications where the reduced current capacity does not compromise circuit performance. Voltage rating is not specified for this part.

Compliance Considerations

All active substitute parts meet MSL 1 (unlimited moisture sensitivity) and REACH compliance requirements. The transition from the non-compliant original part to ROHS3-compliant alternatives aligns with current regulatory standards for new production and procurement.

Frequently Asked Questions (FAQ)

Q: Can I use 17011102402 as a direct replacement for HM2P07PDF2K0N9?

A: Mechanically and thermally, yes. Electrically, 17011102402 is rated for 1.0A versus the original 1.5A. Use this part only if your circuit design operates below 1.0A. The unspecified voltage rating also introduces uncertainty for high-voltage applications.

Q: What is the difference between the TE Connectivity Z-PACK variants?

A: All Z-PACK variants (5100143-1, 5106164-1, 5106413-1, 5188398-9, 5188731-1, 5188733-1) share identical electrical specifications (1.5A, 500Vrms) and mechanical configuration. Differences exist in base product numbers and internal design features. Part 5106164-1 includes an alignment strip in addition to the board guide. Selection among these variants depends on specific PCB design requirements and feature compatibility.

Q: Why is the voltage rating lower on substitute parts (500Vrms vs. 750Vrms)?

A: The original HM2P07PDF2K0N9 is rated 750Vrms. Active substitute parts are rated 500Vrms. For applications requiring 750Vrms operation, the original part specifications must be maintained or alternative connector families evaluated. For standard backplane applications operating below 500Vrms, substitutes are fully qualified.

Q: Are all substitute parts RoHS compliant?

A: All active substitute parts carry either ROHS3 or RoHS compliance certification. The original obsolete part is RoHS non-compliant. Compliance status should be verified against your procurement and regulatory requirements.

Q: What is the difference between contact finish specifications?

A: The original part specifies flash gold finish. Substitute parts specify either no thickness data or 30.0µin (0.76µm) gold finish. Both finishes provide equivalent corrosion resistance and electrical performance for the specified current and voltage ratings. Contact finish thickness does not affect functional interchangeability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message