HM2P07PDF2J0N9LF Equivalent & Substitute Parts

Part Overview

The HM2P07PDF2J0N9LF is a 110-position header connector manufactured by Amphenol ICC (FCI) in the Millipacs® series. This backplane connector features male pins with 2.00mm pitch, press-fit termination, and through-hole mounting. The part is currently active in production with full inventory availability (725 pcs). Substitute parts are necessary to address supply chain flexibility, alternative sourcing options, and compatibility with different manufacturing environments while maintaining equivalent electrical and mechanical performance.

Substiute Parts

HM2P07PDF2J0N9LF

Amphenol ICC (FCI)In Stock: 782HM2P07PDF2J0N9LF Datasheet

Current PartRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

5100143-1

TE Connectivity AMP ConnectorsIn Stock: 31345100143-1 Datasheet

MFR RecommendedRFQ

5106164-1

TE Connectivity AMP ConnectorsIn Stock: 15415106164-1 Datasheet

MFR RecommendedRFQ

PCN21B-110PB-2PF-G

Hirose Electric Co LtdIn Stock: 1154PCN21B-110PB-2PF-G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDF2J0N9LF is determined by the following critical parameters:

• Number of Positions: 110 positions (exact match required)
• Pitch: 0.079" (2.00mm) (exact match required)
• Number of Rows: 5 rows (exact match required)
• Connector Type: Header, Male Pins (exact match required)
• Connector Style: A 22 (exact match required)
• Mounting Type: Through Hole (exact match required)
• Termination: Press-Fit (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Contact Finish: Gold or equivalent noble metal finish
• Current Rating: Minimum 1.5 A
• Voltage Rating: Minimum 500Vrms

The substitute parts listed below meet these core electrical and mechanical parameters, ensuring direct functional equivalence in backplane connector applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Recommended for New Designs)

The parts 5100143-1 and 5106164-1 from TE Connectivity AMP Connectors are the preferred substitutes. Both maintain full electrical equivalence with the HM2P07PDF2J0N9LF, including 1.5 A current rating and 500Vrms voltage rating. Both are ROHS3 compliant and active in production. The 5106164-1 includes an alignment strip feature in addition to the board guide, providing enhanced mechanical stability. Inventory availability is substantial (3040 pcs and 1516 pcs respectively).

Secondary Substitute (Alternative Sourcing)

The 17011102402 from HARTING (har-bus® HM series) provides mechanical and thermal equivalence with identical position count, pitch, row configuration, and operating temperature range. This part is ROHS3 compliant and active. However, the current rating is specified at 1 A, which is lower than the primary part's 1.5 A rating. Voltage rating is not specified. This part is suitable for applications where the 1 A current rating is acceptable.

Limited Substitute (Restricted Use)

The PCN21B-110PB-2PF-G from Hirose Electric is marked as obsolete and features a different connector style (B 22 vs. A 22) with 154 total positions (110 + 44 ground) and 7 rows (5 + 2). The voltage rating is 300V, which is lower than the primary part. This part should be used only when mechanical accommodation for the additional ground positions and different row configuration is available in the application.

Frequently Asked Questions (FAQ)

Q: Can I use 17011102402 as a direct replacement for HM2P07PDF2J0N9LF?

A: The 17011102402 provides mechanical and thermal compatibility with identical pitch, position count, and row configuration. However, the current rating is specified at 1 A compared to the primary part's 1.5 A. Use this substitute only if your application current requirements do not exceed 1 A.

Q: What is the difference between 5100143-1 and 5106164-1?

A: Both parts are electrically and mechanically equivalent with identical position count, pitch, row configuration, current rating (1.5 A), and voltage rating (500Vrms). The 5106164-1 includes an alignment strip feature in addition to the board guide, providing enhanced mechanical positioning during assembly.

Q: Why is PCN21B-110PB-2PF-G listed as a substitute if it has a different connector style and more positions?

A: The PCN21B-110PB-2PF-G maintains the same 2.00mm pitch, press-fit termination, through-hole mounting, and operating temperature range. The additional 44 ground positions and different connector style (B 22) make it suitable only for applications where the PCB layout can accommodate the different physical configuration and where the lower 300V voltage rating is acceptable.

Q: Are all substitute parts RoHS compliant?

A: Yes. The primary substitutes (5100143-1 and 5106164-1) are ROHS3 compliant. The 17011102402 is ROHS3 compliant. The PCN21B-110PB-2PF-G is RoHS compliant. All parts meet current regulatory requirements.

Q: What packaging formats are available for these substitutes?

A: The HM2P07PDF2J0N9LF is supplied in trays. Substitute parts are available in alternative packaging: 17011102402 in tubes, 5100143-1 and 5106164-1 in tubes, and PCN21B-110PB-2PF-G in bulk. Verify packaging requirements with your procurement process.

Q: Can I mix different substitute parts in the same assembly?

A: Yes, provided your application design accommodates the specific electrical and mechanical characteristics of each part. The primary substitutes (5100143-1 and 5106164-1) are fully interchangeable. The 17011102402 may be used where 1 A current rating is acceptable. The PCN21B-110PB-2PF-G requires PCB layout modifications due to its different connector style and additional ground positions.