Request Quote
(Ships tomorrow)
HM2P07PDF2J0N9 Equivalent & Substitute Parts
Part Overview
The HM2P07PDF2J0N9 is a 110-position header connector with male pins, 2.00mm pitch, designed for through-hole press-fit mounting in backplane applications. Manufactured by Amphenol ICC (FCI) under the Millipacs® series, this connector operates across -55°C to 125°C with a 1.5A current rating and 750Vrms voltage rating.
The original part carries an obsolete product status. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and access components with active manufacturing status and current compliance certifications.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Number of Positions | 110 |
| Pitch | 0.079" (2.00mm) |
| Number of Rows | 5 |
| Connector Type | Header, Male Pins |
| Connector Style | A 22 |
| Mounting Type | Through Hole |
| Termination | Press-Fit |
| Contact Finish | Gold |
| Current Rating | 1.5 A |
| Voltage Rating | 500–750Vrms |
| Operating Temperature | -55°C to 125°C |
| Features | Board Guide |
Substitute Part Grouping Explanation
Substitution eligibility is determined by strict alignment of the following parameters:
- Position count and pitch: All substitutes maintain 110 positions at 2.00mm pitch
- Connector geometry: All maintain 5-row configuration with A 22 connector style
- Mounting and termination: All use through-hole press-fit mounting
- Contact system: All feature gold contact finish
- Electrical ratings: Current rating of 1.5A is maintained across primary substitutes; voltage rating ranges from 500Vrms to 750Vrms
- Temperature range: All operate within -55°C to 125°C
- Board guide feature: Maintained across all substitutes
Substitutes are grouped by manufacturer and product status. Direct manufacturer equivalents from Amphenol ICC (FCI) provide identical electrical and mechanical specifications. TE Connectivity AMP Connectors and HARTING alternatives meet core dimensional and functional requirements with active product status and current compliance certifications.
Parameter Comparison
| Part Number | Manufacturer | Series | Positions | Pitch | Rows | Current (A) | Voltage (Vrms) | Temp Range (°C) | Product Status | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|---|
| HM2P07PDF2J0N9 | Amphenol ICC (FCI) | Millipacs® | 110 | 2.00mm | 5 | 1.5 | 750 | -55 to 125 | Obsolete | Non-compliant |
| HM2P07PDF2J0N9LF | Amphenol ICC (FCI) | Millipacs® | 110 | 2.00mm | 5 | 1.5 | 750 | -55 to 125 | Active | Compliant |
| 1-5100143-9 | TE Connectivity AMP | Z-PACK | 110 | 2.00mm | 5 | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
| 1-5188398-9 | TE Connectivity AMP | Z-PACK | 110 | 2.00mm | 5 | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
| 17011102204 | HARTING | har-bus® HM | 110 | 2.00mm | 5 | 1.0 | — | -55 to 125 | Active | ROHS3 Compliant |
| 17011102402 | HARTING | har-bus® HM | 110 | 2.00mm | 5 | 1.0 | — | -55 to 125 | Active | ROHS3 Compliant |
| 17011104201 | HARTING | har-bus® HM | 110 | 2.00mm | 5 | 1.0 | — | -55 to 125 | Active | ROHS3 Compliant |
| 3-5100143-0 | TE Connectivity AMP | Z-PACK | 110 | 2.00mm | 5 | 1.5 | 500 | -55 to 125 | Active | Compliant |
| 5100143-1 | TE Connectivity AMP | Z-PACK | 110 | 2.00mm | 5 | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
| 5106164-1 | TE Connectivity AMP | Z-PACK | 110 | 2.00mm | 5 | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
| 5106413-1 | TE Connectivity AMP | Z-PACK | 110 | 2.00mm | 5 | 1.5 | 500 | -55 to 125 | Active | ROHS3 Compliant |
Engineering Selection Recommendations
Primary Direct Equivalent: HM2P07PDF2J0N9LF (Amphenol ICC FCI) provides identical electrical and mechanical specifications to the original part with active product status and RoHS compliance. This is the preferred choice for direct replacement.
TE Connectivity AMP Connectors (Z-PACK Series): Parts 1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, and 5106413-1 maintain 1.5A current rating and full 110-position, 2.00mm pitch configuration. All carry active product status and ROHS3 compliance. Voltage rating is 500Vrms, which is lower than the original 750Vrms specification. These parts are suitable for applications where 500Vrms voltage rating is acceptable.
HARTING har-bus® HM Series: Parts 17011102204, 17011102402, and 17011104201 maintain dimensional and pitch specifications with active product status and ROHS3 compliance. Current rating is 1.0A, which is lower than the original 1.5A specification. Voltage rating is not specified. These parts are suitable for applications with lower current requirements.
Selection should prioritize parts with active product status and current compliance certifications. Voltage and current ratings must be evaluated against application requirements.
Frequently Asked Questions (FAQ)
Q: Can HM2P07PDF2J0N9LF be used as a direct replacement for HM2P07PDF2J0N9?
A: Yes. HM2P07PDF2J0N9LF is the direct equivalent from Amphenol ICC (FCI) with identical electrical and mechanical specifications. The primary difference is active product status and RoHS compliance certification.
Q: What is the difference between TE Connectivity and HARTING substitutes?
A: TE Connectivity AMP Connectors maintain the 1.5A current rating of the original part with 500Vrms voltage rating. HARTING har-bus® HM series parts have a 1.0A current rating with unspecified voltage rating. Selection depends on application current and voltage requirements.
Q: Are HARTING parts compatible with the original design?
A: HARTING parts maintain the 110-position, 2.00mm pitch, 5-row configuration and through-hole press-fit mounting. However, the 1.0A current rating is lower than the original 1.5A specification. Compatibility depends on whether the application can operate within the lower current rating.
Q: What does the "LF" suffix in HM2P07PDF2J0N9LF indicate?
A: The "LF" suffix indicates lead-free termination and RoHS compliance. This is the modern equivalent of the original part.
Q: Can I use TE Connectivity parts in place of the original if my application requires 750Vrms?
A: No. TE Connectivity AMP Connectors in this group are rated for 500Vrms. If 750Vrms is required, use HM2P07PDF2J0N9LF or verify that the application can operate at 500Vrms.
Q: What packaging options are available?
A: Amphenol ICC (FCI) HM2P07PDF2J0N9LF is supplied in Tray packaging. TE Connectivity and HARTING substitutes are supplied in Tube packaging.
Q: Are all substitute parts RoHS compliant?
A: HM2P07PDF2J0N9LF is RoHS Compliant. TE Connectivity parts 1-5100143-9, 1-5188398-9, 5100143-1, 5106164-1, and 5106413-1 are ROHS3 Compliant. Part 3-5100143-0 is RoHS Compliant. All HARTING parts are ROHS3 Compliant.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts