Request Quote
(Ships tomorrow)
HM2P07PDF2E1N9 Equivalent & Substitute Parts
Part Overview
The HM2P07PDF2E1N9 is a 154-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This connector features male pins with 0.079" (2.00mm) pitch, press-fit termination, and through-hole mounting. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design and procurement requirements.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | HM2P07PDF2E1N9 |
| Manufacturer | Amphenol ICC (FCI) |
| Category | Backplane Connectors |
| Connector Type | Header, Male Pins |
| Number of Positions | 154 (110 + 44 Ground) |
| Pitch | 0.079" (2.00mm) |
| Number of Rows | 5 + 2 |
| Mounting Type | Through Hole |
| Termination | Press-Fit |
| Current Rating | 1.5 A |
| Voltage Rating | 750Vrms |
| Operating Temperature | -55°C ~ 125°C |
| Contact Finish | Gold (Flash) |
| Product Status | Obsolete |
| RoHS Status | RoHS non-compliant |
Substitute Part Grouping Explanation
Substitution logic for the HM2P07PDF2E1N9 is determined by the following critical parameters:
Position Count & Configuration: The main part contains 154 positions (110 signal + 44 ground). Substitute parts are grouped into two categories: direct equivalents maintaining 154-position configuration, and functional alternatives with 110-position signal configuration.
Pitch & Mounting: All substitutes maintain 0.079" (2.00mm) pitch and through-hole press-fit termination, ensuring mechanical and electrical compatibility at the board interface.
Electrical Ratings: Current rating (1.5 A) and voltage rating (500Vrms minimum) are preserved across active substitutes. The original 750Vrms rating is not matched by all alternatives but does not preclude substitution in applications within the 500Vrms specification.
Temperature Range: All substitutes support -55°C ~ 125°C operating temperature, matching the original specification.
Compliance & Status: Active substitutes are RoHS3 compliant, addressing the obsolescence and non-compliance status of the original part.
Parameter Comparison
| Part Number | Manufacturer | Positions | Rows | Pitch | Current (A) | Voltage (Vrms) | Temp Range | Status | RoHS |
|---|---|---|---|---|---|---|---|---|---|
| HM2P07PDF2E1N9 | Amphenol ICC (FCI) | 154 | 5 + 2 | 0.079" | 1.5 | 750 | -55 to 125°C | Obsolete | Non-compliant |
| HM2P07PDF2E1N9LF | Amphenol ICC (FCI) | 154 | 5 + 2 | 0.079" | 1.5 | 750 | -55 to 125°C | Active | Compliant |
| 1-5100143-9 | TE Connectivity AMP | 110 | 5 | 0.079" | 1.5 | 500 | -55 to 125°C | Active | ROHS3 |
| 1-5188398-9 | TE Connectivity AMP | 110 | 5 | 0.079" | 1.5 | 500 | -55 to 125°C | Active | ROHS3 |
| 17011102402 | HARTING | 110 | 5 | 0.079" | 1.0 | — | -55 to 125°C | Active | ROHS3 |
| 3-5100143-0 | TE Connectivity AMP | 110 | 5 | 0.079" | 1.5 | 500 | -55 to 125°C | Active | Compliant |
| 5100143-1 | TE Connectivity AMP | 110 | 5 | 0.079" | 1.5 | 500 | -55 to 125°C | Active | ROHS3 |
| 5106164-1 | TE Connectivity AMP | 110 | 5 | 0.079" | 1.5 | 500 | -55 to 125°C | Active | ROHS3 |
| 5106413-1 | TE Connectivity AMP | 110 | 5 | 0.079" | 1.5 | 500 | -55 to 125°C | Active | ROHS3 |
| 5188398-9 | TE Connectivity AMP | 110 | 5 | 0.079" | 1.5 | 500 | -55 to 125°C | Active | Compliant |
| 5188731-1 | TE Connectivity AMP | 110 | 5 | 0.079" | 1.5 | 500 | -55 to 125°C | Active | Compliant |
Engineering Selection Recommendations
Direct Equivalent (Same Position Count): HM2P07PDF2E1N9LF is the direct active equivalent from Amphenol ICC (FCI). This part maintains the 154-position configuration, identical pitch, and electrical ratings while providing RoHS compliance and active product status. This is the primary choice for direct replacement in existing designs.
Functional Alternatives (110-Position Signal Configuration): The TE Connectivity Z-PACK series (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1, 5188398-9, 5188731-1) and HARTING har-bus® HM series (17011102402) provide 110-position signal headers with 5 rows. These parts are suitable for applications where the full 154-position configuration is not required. All TE Connectivity variants maintain 1.5 A current rating and 500Vrms voltage rating. The HARTING part specifies 1.0 A current rating and does not provide voltage rating specification.
Compliance Considerations: All active substitutes are RoHS3 compliant, addressing the non-compliance status of the obsolete original part. TE Connectivity parts show either ROHS3 Compliant or RoHS Compliant status. HARTING part is ROHS3 Compliant.
Frequently Asked Questions (FAQ)
Q: Can HM2P07PDF2E1N9LF be used as a direct replacement for HM2P07PDF2E1N9? A: Yes. HM2P07PDF2E1N9LF maintains identical electrical and mechanical specifications including 154-position configuration, 0.079" pitch, 1.5 A current rating, and -55°C to 125°C operating temperature. The primary difference is active product status and RoHS compliance.
Q: What is the difference between the 154-position and 110-position substitutes? A: The original HM2P07PDF2E1N9 contains 154 total positions (110 signal + 44 ground). The 110-position alternatives provide only signal positions without dedicated ground rows. Selection depends on application requirements for ground distribution and signal density.
Q: Are TE Connectivity Z-PACK and HARTING har-bus® HM connectors mechanically compatible? A: Both maintain 0.079" (2.00mm) pitch and through-hole press-fit termination. However, they are from different manufacturers and may have different footprint details. Verify mechanical compatibility with board layout specifications before selection.
Q: Does the 500Vrms rating of substitute parts affect compatibility with the original 750Vrms specification? A: The original part specifies 750Vrms. Substitute parts with 500Vrms rating are suitable for applications operating within the 500Vrms limit. Applications requiring the full 750Vrms specification must use HM2P07PDF2E1N9LF.
Q: What is the significance of the packaging differences (Tray vs. Tube)? A: Packaging affects handling, storage, and procurement logistics but does not impact electrical or mechanical performance. Selection should align with assembly process requirements and inventory management practices.
Q: Why do some TE Connectivity parts show different REACH status designations? A: REACH status reflects regulatory compliance documentation availability from the manufacturer. Vendor Undefined indicates incomplete documentation from the supplier. REACH Unaffected and REACH Affected indicate confirmed regulatory status. All parts are suitable for use; status differences reflect documentation completeness rather than product quality or compliance.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts