HM2P07PDE129N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDE129N9 is a 132-position header connector (110 + 22 ground) manufactured by Amphenol ICC (FCI) from the Millipacs® series. This press-fit through-hole connector operates at 0.079" (2.00mm) pitch with a 5+1 row configuration and gold-plated contacts rated for 1.5A at 750Vrms across -55°C to 125°C. The part is currently obsolete, making equivalent substitutes necessary for ongoing applications and new designs requiring compatible backplane connector solutions.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	132 (110 + 22 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 1
Mounting Type	Through Hole
Termination	Press-Fit
Contact Finish	Gold
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C ~ 125°C
Features	Board Guide

Substitute Part Grouping Explanation

Substitution for the HM2P07PDE129N9 is determined by the following critical parameters: connector type (header, male pins), pitch (0.079" / 2.00mm), mounting method (through-hole press-fit), contact finish (gold), operating temperature range (-55°C to 125°C), and board guide feature. The substitute parts are grouped into two categories based on position count and electrical ratings:

Category 1 - Direct Form Factor Match (132 Positions): HM2P07PDE129N9LF maintains identical position count, row configuration, and electrical specifications as the original part, differing only in packaging (tray vs. standard) and product status (active vs. obsolete).

Category 2 - Reduced Position Count (110 Positions): 17011102402 (HARTING har-bus® HM) and 3-5100143-0 (TE Connectivity Z-PACK) provide 110-position alternatives without ground pins. These parts maintain the same pitch, mounting type, termination method, and operating temperature range. The 17011102402 operates at 1A current rating, while 3-5100143-0 maintains the 1.5A rating and 500Vrms voltage specification.

Parameter Comparison

Parameter	HM2P07PDE129N9	HM2P07PDE129N9LF	17011102402	3-5100143-0
Manufacturer	Amphenol ICC (FCI)	Amphenol ICC (FCI)	HARTING	TE Connectivity AMP
Series	Millipacs®	Millipacs®	har-bus® HM	Z-PACK
Product Status	Obsolete	Active	Active	Active
Number of Positions	132 (110 + 22 Ground)	132 (110 + 22 Ground)	110	110
Pitch	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)
Number of Rows	5 + 1	5 + 1	5	5
Connector Type	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit	Press-Fit	Press-Fit	Press-Fit
Contact Finish	Gold	Gold	Gold or Gold-Palladium	Gold
Current Rating	1.5 A	1.5 A	1 A	1.5 A
Voltage Rating	750Vrms	750Vrms	Not specified	500Vrms
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Features	Board Guide	Board Guide	Board Guide	Board Guide
RoHS Status	Not specified	RoHS Compliant	ROHS3 Compliant	RoHS Compliant
Packaging	Not specified	Tray	Tube	Tube

Engineering Selection Recommendations

For Direct Replacement (Same Position Count): HM2P07PDE129N9LF is the primary substitute, offering identical electrical and mechanical specifications with active product status and RoHS compliance. This part is suitable for applications requiring the full 132-position configuration with dedicated ground pins.

For Reduced Position Count Applications: When 110-position configurations are acceptable, both 17011102402 and 3-5100143-0 provide active alternatives. The 3-5100143-0 maintains the original 1.5A current rating and includes RoHS compliance certification. The 17011102402 operates at 1A current rating with ROHS3 compliance and is available in tube packaging.

Selection between these alternatives depends on current requirements, voltage specifications, and compliance certifications required for the target application. All substitute parts maintain the critical 0.079" pitch, through-hole press-fit termination, and -55°C to 125°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDE129N9LF be used as a direct replacement for HM2P07PDE129N9? A: Yes. Both parts share identical position count (132), pitch (2.00mm), row configuration (5+1), current rating (1.5A), voltage rating (750Vrms), and operating temperature range (-55°C to 125°C). The primary difference is product status (active vs. obsolete) and packaging format (tray vs. standard).

Q: What is the key difference between the 132-position and 110-position substitutes? A: The HM2P07PDE129N9 includes 22 dedicated ground positions in addition to 110 signal positions across 5+1 rows. The 17011102402 and 3-5100143-0 provide 110 positions across 5 rows without a separate ground row. Applications requiring dedicated ground distribution must use the 132-position configuration.

Q: Are there electrical rating differences between the substitute parts? A: The 17011102402 operates at 1A current rating compared to 1.5A for the original and 3-5100143-0. The 3-5100143-0 is rated for 500Vrms versus 750Vrms for the original part. Verify application requirements before selection.

Q: Do all substitute parts meet RoHS compliance? A: HM2P07PDE129N9LF is RoHS Compliant. The 17011102402 is ROHS3 Compliant. The 3-5100143-0 is RoHS Compliant. All three active alternatives meet current environmental compliance standards.

Q: What packaging options are available for these substitutes? A: HM2P07PDE129N9LF is supplied in tray packaging. Both 17011102402 and 3-5100143-0 are supplied in tube packaging. Packaging selection may affect handling, storage, and integration into assembly processes.

Q: Can these connectors be used interchangeably on the same PCB? A: HM2P07PDE129N9LF maintains identical footprint compatibility with the original part. The 110-position alternatives (17011102402 and 3-5100143-0) require PCB redesign due to reduced position count and row configuration changes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message