HM2P07PCF1M1N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PCF1M1N9 is a 154-position (110 + 44 Ground) header connector manufactured by Amphenol ICC (FCI) from the Millipacs® series. This backplane connector features male pins with 0.079" (2.00mm) pitch, press-fit termination, and through-hole mounting. The part is currently obsolete, making equivalent and substitute parts necessary for ongoing system support and new designs requiring compatible backplane connectivity.

Substiute Parts

HM2P07PCF1M1N9

Amphenol ICC (FCI)In Stock: 1138HM2P07PCF1M1N9 Datasheet

Current PartRFQ

HM2P07PCF1M1N9LF

Amphenol ICC (FCI)In Stock: 985HM2P07PCF1M1N9LF Datasheet

DirectRFQ

17011102201

HARTINGIn Stock: 193117011102201 Datasheet

MFR RecommendedRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

3-5100143-0

TE Connectivity AMP ConnectorsIn Stock: 10903-5100143-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HM2P07PCF1M1N9 is determined by the following critical parameters:

• Connector Type & Style: Header, Male Pins, Connector Style A 22
• Pitch: 0.079" (2.00mm)
• Mounting Type: Through Hole
• Termination Method: Press-Fit
• Contact Finish: Gold or Gold-Palladium
• Operating Temperature Range: -55°C ~ 125°C
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute parts are grouped into two categories:

Category 1 - Direct Equivalent (Same Position Count): HM2P07PCF1M1N9LF maintains the full 154-position configuration with identical electrical and mechanical specifications. This part is an active product from the same manufacturer and series.

Category 2 - Functional Substitutes (Reduced Position Count): 17011102201, 17011102402 (HARTING har-bus® HM series), and 3-5100143-0 (TE Connectivity Z-PACK series) provide 110-position headers with compatible pitch, mounting, and termination. These parts meet the core electrical and mechanical requirements but with reduced position count, suitable for applications requiring fewer signal connections.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Same Footprint and Position Count): HM2P07PCF1M1N9LF is the primary choice. This part is an active product from Amphenol ICC (FCI) with identical electrical and mechanical specifications to the obsolete HM2P07PCF1M1N9. It maintains the 154-position configuration, 5 + 2 row arrangement, and all electrical ratings. RoHS compliance status is confirmed, supporting modern manufacturing and environmental requirements.

For Functional Substitution (110-Position Alternative): When system design permits reduction to 110 positions, three active alternatives are available:

• 17011102201 and 17011102402 (HARTING har-bus® HM series): Both parts provide 110-position headers with identical pitch, mounting, and termination. ROHS3 compliance and REACH unaffected status are confirmed. Current rating is 1 A, which is lower than the main part. Voltage rating is not specified.

• 3-5100143-0 (TE Connectivity Z-PACK series): Provides 110-position header with matching pitch, mounting, and termination. Current rating of 1.5 A and voltage rating of 500Vrms are specified. RoHS compliance is confirmed. This part maintains higher electrical performance compared to HARTING alternatives.

Selection between 110-position substitutes depends on current and voltage requirements of the specific application. The TE Connectivity 3-5100143-0 is suitable for applications requiring 1.5 A current capacity. HARTING parts are suitable for applications with lower current requirements (1 A maximum).

Frequently Asked Questions (FAQ)

Q: Can HM2P07PCF1M1N9LF be used as a direct replacement for HM2P07PCF1M1N9? A: Yes. HM2P07PCF1M1N9LF is a direct equivalent with identical electrical and mechanical specifications. The primary difference is product status: HM2P07PCF1M1N9LF is active while the original part is obsolete. Both maintain 154 positions, 2.00mm pitch, press-fit termination, and -55°C to 125°C operating range.

Q: What is the key difference between the 154-position and 110-position substitutes? A: The main part HM2P07PCF1M1N9 provides 154 total positions (110 signal + 44 ground) arranged in 5 + 2 rows. The 110-position substitutes (17011102201, 17011102402, 3-5100143-0) provide 110 positions in 5 rows. Selection depends on whether the application requires the additional 44 ground positions and the 2-row configuration.

Q: Are there current rating differences between substitutes? A: Yes. HM2P07PCF1M1N9 and HM2P07PCF1M1N9LF are rated for 1.5 A. HARTING parts (17011102201, 17011102402) are rated for 1 A. TE Connectivity 3-5100143-0 is rated for 1.5 A. Application current requirements determine which substitute is suitable.

Q: What is the voltage rating difference between substitutes? A: HM2P07PCF1M1N9 and HM2P07PCF1M1N9LF are rated for 750Vrms. TE Connectivity 3-5100143-0 is rated for 500Vrms. HARTING parts do not specify voltage rating. Applications requiring 750Vrms operation should use HM2P07PCF1M1N9LF or verify HARTING voltage specifications with the manufacturer.

Q: Are all substitutes RoHS compliant? A: HM2P07PCF1M1N9LF is RoHS Compliant. HARTING parts (17011102201, 17011102402) are ROHS3 Compliant. TE Connectivity 3-5100143-0 is RoHS Compliant. All substitutes meet modern RoHS requirements.

Q: What packaging options are available? A: HM2P07PCF1M1N9LF is supplied in Tray packaging. HARTING parts (17011102201, 17011102402) are supplied in Tube packaging. TE Connectivity 3-5100143-0 is supplied in Tube packaging. Packaging selection may affect handling, storage, and procurement processes.

Q: Can HARTING and TE Connectivity parts be mixed in the same system? A: Both HARTING and TE Connectivity 110-position parts share identical pitch (2.00mm), mounting type (through hole), and termination method (press-fit). However, current and voltage ratings differ. System design must account for the lowest rated component in the signal path to ensure safe operation.