HM2P07PCF1G1N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PCF1G1N9 is a 154-position backplane connector header manufactured by Amphenol ICC (FCI) with 0.079" (2.00mm) pitch, featuring press-fit termination and gold-plated contacts. This connector is part of the Millipacs® series and is designed for through-hole mounting applications requiring high-density interconnection in backplane systems.

The HM2P07PCF1G1N9 is classified as obsolete. Substitute parts are necessary to maintain design continuity and ensure component availability for new production runs and field replacements. Available alternatives provide equivalent electrical and mechanical performance while offering active product status and improved compliance certifications.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	154 (110 + 44 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 2
Mounting Type	Through Hole
Termination	Press-Fit
Contact Finish	Gold
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C ~ 125°C
Connector Style	A 22
Features	Board Guide

Substitute Part Grouping Explanation

Substitution for the HM2P07PCF1G1N9 is based on the following critical parameters that must remain consistent:

Pitch: 0.079" (2.00mm) — maintains PCB footprint compatibility
Connector Type: Header, Male Pins — ensures mating interface compatibility
Mounting Type: Through Hole — preserves board assembly process
Termination: Press-Fit — maintains solderless connection method
Connector Style: A 22 — ensures mechanical and electrical compatibility
Operating Temperature Range: -55°C ~ 125°C — supports equivalent thermal performance
Contact Finish: Gold — provides equivalent corrosion resistance and conductivity

The substitute parts identified are 110-position headers from TE Connectivity AMP Connectors (Z-PACK series) and HARTING (har-bus® HM series). These parts maintain all critical electrical and mechanical parameters while offering active product status and RoHS3 compliance. The reduction from 154 positions to 110 positions reflects design optimization while preserving the core connector architecture and performance characteristics.

Parameter Comparison

Parameter	HM2P07PCF1G1N9	1-5100143-9	1-5188398-9	17011102402	3-5100143-0	5100143-1	5106164-1
Manufacturer	Amphenol ICC (FCI)	TE Connectivity AMP	TE Connectivity AMP	HARTING	TE Connectivity AMP	TE Connectivity AMP	TE Connectivity AMP
Number of Positions	154	110	110	110	110	110	110
Pitch	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)
Number of Rows	5 + 2	5	5	5	5	5	5
Connector Type	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins
Connector Style	A 22	A 22	A 22	A 22	A 22	A 22	A 22
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit	Press-Fit
Contact Finish	Gold	Gold	Gold	Gold or Gold-Palladium	Gold	Gold	Gold
Current Rating	1.5 A	1.5 A	1.5 A	1 A	1.5 A	1.5 A	1.5 A
Voltage Rating	750Vrms	500Vrms	500Vrms	—	500Vrms	500Vrms	500Vrms
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Product Status	Obsolete	Active	Active	Active	Active	Active	Active
RoHS Status	Non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Features	Board Guide	Board Guide	Board Guide	Board Guide	Board Guide	Board Guide	Alignment Strip, Board Guide

Engineering Selection Recommendations

TE Connectivity AMP Connectors Z-PACK Series (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1)

These parts are recommended as primary substitutes. All Z-PACK series alternatives maintain the 1.5 A current rating and 500Vrms voltage specification. Parts 1-5100143-9, 1-5188398-9, 3-5100143-0, and 5100143-1 are electrically and mechanically equivalent. Part 5106164-1 provides identical performance with the addition of an alignment strip feature. All Z-PACK parts carry ROHS3 compliance certification and active product status, ensuring long-term availability and supply chain stability.

HARTING har-bus® HM Series (17011102402, 17011102201, 17011102204, 17011101402, 17011104201)

These parts provide equivalent mechanical compatibility and thermal performance. The HARTING series operates at 1 A current rating, which is lower than the original 1.5 A specification. Voltage rating is not specified for HARTING parts. All HARTING alternatives carry ROHS3 compliance and active product status. Selection of HARTING parts is appropriate when current requirements do not exceed 1 A and when design flexibility permits the use of alternative connector series.

Frequently Asked Questions (FAQ)

Q: Can the HM2P07PCF1G1N9 be directly replaced with a 110-position substitute?

A: Direct replacement requires PCB redesign. The original part is a 154-position connector (5 rows + 2 rows), while substitute parts are 110-position connectors (5 rows). The footprint and pin count differ. Electrical and mechanical compatibility is maintained for the 110-position configuration, but circuit layout modifications are necessary.

Q: What is the difference between TE Connectivity and HARTING substitute options?

A: TE Connectivity Z-PACK parts maintain the 1.5 A current rating of the original connector. HARTING har-bus® HM parts operate at 1 A. Both series maintain 0.079" (2.00mm) pitch, press-fit termination, and -55°C to 125°C operating temperature range. Selection depends on circuit current requirements and preferred connector series architecture.

Q: Are all substitute parts RoHS compliant?

A: Yes. All identified substitute parts carry either RoHS or ROHS3 compliance certification. The original HM2P07PCF1G1N9 is RoHS non-compliant. Substitution provides improved environmental compliance for new production.

Q: What is the voltage rating difference between the original and substitute parts?

A: The original HM2P07PCF1G1N9 is rated at 750Vrms. TE Connectivity Z-PACK substitutes are rated at 500Vrms. HARTING parts do not specify voltage rating. For applications requiring 750Vrms operation, voltage derating or alternative connector selection may be necessary.

Q: Does the addition of an alignment strip on part 5106164-1 affect compatibility?

A: No. The alignment strip is an additional feature that improves assembly accuracy. All other electrical and mechanical parameters remain identical to other Z-PACK alternatives. The alignment strip does not affect mating interface compatibility.

Q: What is the inventory status of substitute parts?

A: All substitute parts are in active production with confirmed inventory availability. TE Connectivity 5100143-1 has the highest inventory level at 3040 pieces. HARTING 17011102201 has 1900 pieces available. All parts are classified as new original stock.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message