HM1F54FDP000H6P Equivalent & Substitute Parts

Part Overview

The HM1F54FDP000H6P is a 240-position backplane connector receptacle manufactured by Amphenol ICC (FCI) as part of the Metral® series. This board edge, through-hole, right-angle connector features female sockets with press-fit termination and gold-plated contacts. The part is currently listed as obsolete, making identification of equivalent and substitute components essential for ongoing system support and procurement planning.

Substiute Parts

HM1F54FDP000H6P

Amphenol ICC (FCI)In Stock: 810HM1F54FDP000H6P Datasheet

Current PartRFQ

HM1F54FDP000H6PLF

Amphenol ICC (FCI)In Stock: 726HM1F54FDP000H6PLF Datasheet

DirectRFQ

5223008-8

TE Connectivity AMP ConnectorsIn Stock: 8565223008-8 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM1F54FDP000H6P is determined by strict alignment of the following critical parameters:

• Position Count & Pitch: 240 positions at 0.079" (2.00mm) pitch
• Physical Configuration: 5-row board edge, through-hole, right-angle mounting
• Termination Method: Press-fit contact termination
• Electrical Ratings: Voltage and current handling capacity
• Contact Material: Gold plating for signal integrity and corrosion resistance
• Environmental Compliance: Operating temperature range and flammability certification

Two substitute parts meet these criteria with varying degrees of parameter alignment:

HM1F54FDP000H6PLF (Amphenol ICC) — Direct manufacturer equivalent with identical electrical and mechanical specifications, differentiated only by active product status and packaging format.

5223008-8 (TE Connectivity) — Cross-manufacturer substitute with matching position count, pitch, mounting configuration, and termination method. Differences exist in voltage rating, current rating specification, and operating temperature maximum.

Parameter Comparison

Engineering Selection Recommendations

HM1F54FDP000H6PLF is the primary substitute for obsolete HM1F54FDP000H6P applications. Both parts are manufactured by Amphenol ICC within the Metral® series and maintain identical electrical and mechanical specifications. The direct equivalent offers the advantage of active product status, ensuring continued availability and supply chain stability. HM1F54FDP000H6PLF achieves RoHS compliance, addressing regulatory requirements that may apply to new designs or system upgrades.

5223008-8 serves as a cross-manufacturer alternative when Amphenol ICC parts are unavailable. This TE Connectivity connector maintains mechanical and termination compatibility but operates at significantly reduced voltage rating (30V versus 1000V). Selection of 5223008-8 is appropriate only for applications where the lower voltage specification meets system requirements. The extended operating temperature range (-55°C ~ 125°C) provides thermal margin beyond the original specification.

For applications requiring the full 1000V rating and 1A current capacity of the original part, HM1F54FDP000H6PLF is the recommended selection. For lower-voltage applications, 5223008-8 offers an active alternative with extended thermal performance.

Frequently Asked Questions (FAQ)

Q: Can HM1F54FDP000H6PLF be used as a direct replacement for HM1F54FDP000H6P?

A: Yes. Both parts share identical position count (240), pitch (0.079"), row configuration (5), mounting type (board edge, through-hole, right-angle), termination method (press-fit), contact finish (gold), and electrical ratings (1000V, 1A). The primary difference is product status: HM1F54FDP000H6PLF is active while HM1F54FDP000H6P is obsolete.

Q: What are the key differences between HM1F54FDP000H6PLF and 5223008-8?

A: Both maintain the same mechanical configuration and position count. Critical differences include voltage rating (HM1F54FDP000H6PLF: 1000V; 5223008-8: 30V), manufacturer (Amphenol ICC versus TE Connectivity), and series designation (Metral® versus Z-PACK). The 5223008-8 offers extended operating temperature range to 125°C.

Q: Is 5223008-8 suitable for high-voltage applications?

A: No. The 5223008-8 is rated for 30V maximum, making it unsuitable for applications requiring the 1000V rating of the original HM1F54FDP000H6P or its direct equivalent HM1F54FDP000H6PLF.

Q: What is the impact of packaging differences among these parts?

A: HM1F54FDP000H6P ships in bulk packaging, HM1F54FDP000H6PLF in trays, and 5223008-8 in tubes. Packaging affects handling, storage, and integration into automated assembly processes but does not alter electrical or mechanical compatibility.

Q: Does RoHS compliance affect substitution decisions?

A: RoHS compliance status should be evaluated against system and regulatory requirements. HM1F54FDP000H6PLF and 5223008-8 are both RoHS compliant, while the original HM1F54FDP000H6P is non-compliant. For new designs or systems subject to RoHS regulations, the compliant alternatives are required.

Q: Are there any thermal performance considerations when selecting between substitutes?

A: The original HM1F54FDP000H6P and HM1F54FDP000H6PLF operate to 105°C maximum. The 5223008-8 extends this to 125°C, providing additional thermal margin in high-temperature environments. However, this advantage applies only to applications where the 30V rating is acceptable.