HM1F41FDP000H6 Equivalent & Substitute Parts

Part Overview

The HM1F41FDP000H6 is a 24-position Metral® backplane connector receptacle manufactured by Amphenol ICC (FCI). This connector features female sockets, board edge mounting with through-hole termination, and right-angle orientation. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance and new design implementations where legacy compatibility is required.

Substiute Parts

HM1F41FDP000H6

Amphenol ICC (FCI)In Stock: 1066HM1F41FDP000H6 Datasheet

Current PartRFQ

HM1F41FDP000H6LF

Amphenol ICC (FCI)In Stock: 1027HM1F41FDP000H6LF Datasheet

DirectRFQ

536511-1

TE Connectivity AMP ConnectorsIn Stock: 957536511-1 Datasheet

MFR RecommendedRFQ

5536511-1

TE Connectivity AMP ConnectorsIn Stock: 21155536511-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HM1F41FDP000H6 is determined by the following critical parameters that must remain consistent:

Mechanical Compatibility:

• Number of positions: 24
• Number of rows: 4
• Pitch: 0.079" (2.00mm)
• Mounting type: Board edge, through hole, right angle
• Connector type: Receptacle, female sockets
• Termination: Press-fit

Electrical Compatibility:

• Voltage rating: 1000V minimum
• Current rating: 1A minimum
• Operating temperature range: -55°C to 105°C minimum
• Material flammability: UL94 V-0

Identified Substitutes:

1. HM1F41FDP000H6LF (Amphenol ICC) – Direct manufacturer equivalent with active product status and RoHS compliance
2. 536511-1 (TE Connectivity AMP Connectors) – Functionally equivalent Futurebus connector with extended temperature range
3. 5536511-1 (TE Connectivity AMP Connectors) – Functionally equivalent Futurebus connector with active status and RoHS compliance

Parameter Comparison

Engineering Selection Recommendations

HM1F41FDP000H6LF is the primary substitute for direct replacement. This part maintains identical electrical and mechanical specifications while offering active product status and RoHS compliance. It is manufactured by the same supplier (Amphenol ICC) and shares the same base product number (HM1F41), ensuring design compatibility with minimal risk.

536511-1 and 5536511-1 (TE Connectivity AMP Connectors Z-PACK series) are functionally equivalent alternatives. These Futurebus connectors maintain mechanical compatibility and meet the same flammability requirements. However, the voltage rating is reduced to 30V, and current rating is not specified. These parts are suitable only for applications where the 1000V and 1A ratings of the original part are not required. The 5536511-1 variant offers active product status and RoHS compliance with tube packaging.

For new designs requiring RoHS compliance and active product support, HM1F41FDP000H6LF or 5536511-1 are recommended. For legacy system maintenance where RoHS compliance is not a constraint, all three substitutes maintain mechanical and thermal compatibility.

Frequently Asked Questions (FAQ)

Q: Can HM1F41FDP000H6LF be used as a direct replacement for HM1F41FDP000H6?

A: Yes. HM1F41FDP000H6LF is a direct equivalent with identical electrical and mechanical specifications. The primary differences are product status (active vs. obsolete), RoHS compliance, and packaging format (tube). No design modifications are required.

Q: What is the key difference between the Amphenol and TE Connectivity substitutes?

A: The Amphenol HM1F41FDP000H6LF maintains the original 1000V voltage rating and 1A current rating. The TE Connectivity Z-PACK series (536511-1 and 5536511-1) reduces the voltage rating to 30V and does not specify a current rating. Selection depends on application voltage and current requirements.

Q: Are the TE Connectivity parts (536511-1 and 5536511-1) mechanically compatible?

A: Yes. Both TE Connectivity parts maintain the same 24-position, 4-row configuration with 0.079" (2.00mm) pitch, board edge mounting, and right-angle orientation. They are mechanically interchangeable with the original part.

Q: What is the difference between 536511-1 and 5536511-1?

A: Both parts are functionally identical Z-PACK series Futurebus connectors. The primary differences are product status (536511-1 is active; 5536511-1 is active), RoHS compliance (5536511-1 is RoHS compliant), and packaging (5536511-1 is supplied in tube format). The 5536511-1 is preferred for new designs requiring RoHS compliance.

Q: Can these substitutes be used in applications requiring 1000V operation?

A: No. The TE Connectivity substitutes (536511-1 and 5536511-1) have a 30V voltage rating and are not suitable for 1000V applications. Use HM1F41FDP000H6LF for applications requiring the original 1000V specification.

Q: What packaging options are available?

A: HM1F41FDP000H6LF and 5536511-1 are supplied in tube packaging. Packaging for 536511-1 is not specified. Verify packaging requirements with your procurement process.

Q: Are all substitutes rated for the same operating temperature range?

A: No. HM1F41FDP000H6 and HM1F41FDP000H6LF are rated -55°C to 105°C. The TE Connectivity parts (536511-1 and 5536511-1) are rated -55°C to 125°C, providing an extended upper temperature limit of 20°C.