HLMP-RL10-LP000 Equivalent & Substitute Parts

Part Overview

The HLMP-RL10-LP000 is an amber 590nm LED indicator manufactured by Broadcom Limited, designed for through-hole mounting applications requiring discrete 2.02V radial configuration. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain design continuity and ensure supply chain availability for new production and legacy system support.

Substiute Parts

HLMP-RL10-LP000

Broadcom LimitedIn Stock: 815HLMP-RL10-LP000 Datasheet

Current PartRFQ

HLMP-RL20-MP0DD

Broadcom LimitedIn Stock: 989HLMP-RL20-MP0DD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HLMP-RL10-LP000 is determined by the following critical parameters:

• Color and Wavelength: Amber 590nm dominant wavelength ensures consistent optical output for indication applications
• Forward Voltage: 2.02V typical forward voltage maintains circuit compatibility with existing driver designs
• Test Current: 20mA test current establishes baseline brightness and operational characteristics
• Lens Configuration: Oval with domed top geometry preserves mechanical fit and optical performance
• Mounting Type: Through-hole radial package ensures PCB compatibility
• Compliance: ROHS3 compliance and REACH unaffected status maintain regulatory alignment

The HLMP-RL20-MP0DD meets all substitution criteria within these parameters while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

The HLMP-RL20-MP0DD is the direct substitute for the obsolete HLMP-RL10-LP000. Both components share identical forward voltage (2.02V), test current (20mA), dominant wavelength (590nm), and mounting configuration. The HLMP-RL20-MP0DD maintains active product status with Broadcom Limited, ensuring continued availability and supply chain support.

Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements. The HLMP-RL20-MP0DD provides increased brightness (835mcd versus 775mcd) while preserving optical and electrical characteristics necessary for direct substitution in existing designs.

Physical dimensions differ slightly: the HLMP-RL20-MP0DD has a maximum height of 10.40mm compared to 6.50mm for the HLMP-RL10-LP000, and lens diameter is 3.90mm versus 4.00mm. These dimensional variations require verification against PCB layout constraints and mechanical clearance requirements before implementation.

Frequently Asked Questions (FAQ)

Q: Can the HLMP-RL20-MP0DD replace the HLMP-RL10-LP000 in existing designs?

A: Yes. Both components share identical forward voltage (2.02V), test current (20mA), and dominant wavelength (590nm). Electrical compatibility is maintained. Physical dimensions must be verified against PCB layout and mechanical clearance specifications.

Q: What are the key differences between these parts?

A: The HLMP-RL20-MP0DD offers higher brightness (835mcd versus 775mcd), greater maximum height (10.40mm versus 6.50mm), and slightly smaller lens diameter (3.90mm versus 4.00mm). Product status differs: HLMP-RL10-LP000 is obsolete; HLMP-RL20-MP0DD is active.

Q: Are both parts compliant with current regulations?

A: Yes. Both the HLMP-RL10-LP000 and HLMP-RL20-MP0DD are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

Q: What viewing angle specifications apply to these components?

A: Both parts specify 120° and 60° viewing angles. The HLMP-RL10-LP000 lists these as separate values; the HLMP-RL20-MP0DD specifies them as 60° x 120°, representing the same optical characteristics.

Q: Are there any moisture sensitivity considerations?

A: The HLMP-RL10-LP000 specifies Moisture Sensitivity Level (MSL) 1 (Unlimited). This parameter is not provided for the HLMP-RL20-MP0DD in the available data.