HLMP-D101-J0001 Equivalent & Substitute Parts

Part Overview

The HLMP-D101-J0001 is a red diffused LED indicator in T-1 3/4 through-hole package manufactured by Broadcom Limited. This component is classified as obsolete, which necessitates identification of equivalent and substitute parts for ongoing design support and procurement. The part operates at 1.8V forward voltage with 70mcd brightness rating and 637nm dominant wavelength, designed for standard indication applications in electronic equipment.

Substiute Parts

HLMP-D101-J0001

Broadcom LimitedIn Stock: 1054HLMP-D101-J0001 Datasheet

Current PartRFQ

HLMP-D101-J0002

Broadcom LimitedIn Stock: 804HLMP-D101-J0002 Datasheet

Parametric EquivalentRFQ

MV5753A4R0

Fairchild SemiconductorIn Stock: 26932MV5753A4R0 Datasheet

MFR RecommendedRFQ

MV6951

onsemiIn Stock: 1109MV6951 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HLMP-D101-J0001 are identified based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

• Lens size: 5mm, T-1 3/4 form factor
• Mounting type: Through hole radial configuration
• Color: Red indication
• Lens transparency: Diffused
• Current rating: 20mA test current
• Viewing angle: 65° or greater
• Package/case: Radial

Secondary Consideration Parameters:

• Forward voltage (Vf): Range 1.8V to 2.4V acceptable for most applications
• Millicandela rating: 12mcd to 70mcd range
• Wavelength: 635nm to 650nm peak wavelength range
• Height: Maximum 9.19mm

Substitutes are grouped into two categories: parametric equivalents (identical electrical and mechanical specifications) and manufacturer-recommended alternatives (functionally compatible with minor parameter variations).

Parameter Comparison

Engineering Selection Recommendations

HLMP-D101-J0002 (Broadcom Limited)

This part is the direct parametric equivalent to HLMP-D101-J0001. It maintains identical electrical specifications (1.8V forward voltage, 70mcd brightness, 637nm dominant wavelength) and mechanical form factor. The primary distinction is product status: HLMP-D101-J0002 is active and ROHS3 compliant, making it the preferred replacement for new designs and ongoing procurement. Packaging differs (Tape & Reel versus bulk), which may affect procurement logistics but does not impact functional performance.

MV5753A4R0 (Fairchild Semiconductor)

This substitute operates at 2V forward voltage with reduced brightness (15mcd) compared to the original specification. The part maintains the same 5mm T-1 3/4 form factor, through-hole mounting, and diffused red lens. Height is slightly reduced (8.89mm versus 9.19mm). This part is active and suitable for applications where the lower brightness rating is acceptable. Moisture sensitivity level is elevated to MSL 3, requiring controlled storage conditions. RoHS compliance status is not applicable.

MV6951 (onsemi)

This substitute operates at 2.4V forward voltage with the lowest brightness rating (12mcd) among the alternatives. It maintains the 5mm T-1 3/4 form factor and through-hole mounting. Viewing angle is slightly wider (70° versus 65°). The part is classified as obsolete. Height is reduced to 8.89mm. This option is suitable only when brightness reduction is acceptable and when the higher forward voltage can be accommodated in the circuit design.

Frequently Asked Questions (FAQ)

Q: Can HLMP-D101-J0002 be used as a direct replacement for HLMP-D101-J0001?

A: Yes. HLMP-D101-J0002 is a parametric equivalent with identical electrical and mechanical specifications. The only differences are product status (active versus obsolete) and packaging format (Tape & Reel versus bulk). No circuit modifications are required.

Q: What are the key differences between the Broadcom and Fairchild substitutes?

A: HLMP-D101-J0002 maintains the original 1.8V forward voltage and 70mcd brightness. MV5753A4R0 requires 2V forward voltage and provides only 15mcd brightness. Circuit design must account for the higher voltage drop and reduced light output when using the Fairchild part.

Q: Is the onsemi MV6951 suitable for my application?

A: MV6951 is suitable only if your application can tolerate 2.4V forward voltage and 12mcd brightness output. The part is obsolete, which may limit future availability. Moisture sensitivity level MSL 1 is equivalent to the original part.

Q: How do the form factors compare?

A: All four parts use the 5mm T-1 3/4 through-hole radial package. Height varies slightly: HLMP-D101-J0001 and HLMP-D101-J0002 are 9.19mm maximum, while MV5753A4R0 and MV6951 are 8.89mm maximum. This 0.3mm difference is typically not significant for standard PCB layouts.

Q: What is the impact of RoHS compliance?

A: HLMP-D101-J0002 is ROHS3 compliant, making it suitable for applications requiring RoHS certification. The original HLMP-D101-J0001 is RoHS non-compliant. MV5753A4R0 has not applicable RoHS status. Verify compliance requirements for your specific application.

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel (TR) and bulk packaging formats contain identical components. Packaging selection affects procurement, handling, and assembly processes but not electrical or mechanical performance.

Q: What is the significance of Moisture Sensitivity Level (MSL)?

A: MSL 1 (unlimited) indicates the component can be stored indefinitely without moisture control. MSL 3 (168 hours) requires controlled storage conditions and limits shelf life after packaging opening. HLMP-D101-J0002 and MV6951 have MSL 1. MV5753A4R0 has MSL 3, requiring more stringent storage management.