HLMP-3301-D0001 Equivalent & Substitute Parts

Part Overview

The HLMP-3301-D0001 is a red diffused LED indicator from Broadcom Limited, designed for through-hole mounting applications. This T-1 3/4 (5mm) radial LED operates at 1.9V forward voltage with a dominant wavelength of 626nm and a peak wavelength of 635nm. The component is actively produced and maintains full RoHS3 compliance with REACH unaffected status. Substitute parts are identified when packaging configurations differ while maintaining identical electrical and mechanical specifications, enabling flexible procurement and inventory management across different assembly processes.

Substiute Parts

HLMP-3301-D0001

Broadcom LimitedIn Stock: 1007HLMP-3301-D0001 Datasheet

Current PartRFQ

HLMP-3301-D0002

Broadcom LimitedIn Stock: 6987HLMP-3301-D0002 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HLMP-3301-D0001 is determined by strict equivalence across all electrical and mechanical parameters. The primary differentiator between the main part and its substitute is packaging configuration. The HLMP-3301-D0001 is supplied in Tape & Reel (TR) format, optimized for high-volume automated assembly. The identified substitute maintains identical specifications across color, lens properties, optical output, forward voltage, test current, viewing angle, mounting type, wavelength characteristics, physical dimensions, and compliance certifications. Substitution is valid only when the alternative packaging format is compatible with the assembly process requirements.

Parameter Comparison

Engineering Selection Recommendations

Both HLMP-3301-D0001 and HLMP-3301-D0002 are active production components from Broadcom Limited with full RoHS3 compliance and REACH unaffected status. Selection between these parts is determined solely by packaging requirements and assembly process compatibility. The HLMP-3301-D0001 in Tape & Reel format is suitable for high-speed automated pick-and-place assembly operations. The HLMP-3301-D0002 in Cut Tape format accommodates manual assembly, lower-volume production runs, or processes requiring individual component handling. Both parts deliver identical electrical performance and optical characteristics in through-hole LED indicator applications.

Frequently Asked Questions (FAQ)

Q: Can HLMP-3301-D0002 be used as a direct replacement for HLMP-3301-D0001?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. Substitution is valid when the assembly process can accommodate Cut Tape (CT) format instead of Tape & Reel (TR) format.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on a reel, optimized for automated assembly equipment. Cut Tape (CT) packaging provides the same carrier tape cut into smaller segments, suitable for manual assembly or lower-volume processes.

Q: Are the optical and electrical specifications identical between these parts?

A: Yes. Both parts share identical specifications for forward voltage (1.9V), test current (10mA), dominant wavelength (626nm), peak wavelength (635nm), millicandela rating (2.1mcd), viewing angle (60°), and physical dimensions (9.19mm maximum height).

Q: Do both parts meet the same compliance standards?

A: Yes. Both HLMP-3301-D0001 and HLMP-3301-D0002 are RoHS3 compliant and REACH unaffected, with identical moisture sensitivity level (MSL 1 - Unlimited).

Q: Which part should be selected for high-volume automated assembly?

A: The HLMP-3301-D0001 in Tape & Reel format is optimized for high-speed automated pick-and-place assembly operations.

Q: Which part is better for manual assembly or prototyping?

A: The HLMP-3301-D0002 in Cut Tape format is more suitable for manual assembly, prototyping, or lower-volume production runs where individual component handling is required.