HLMP-2700 Equivalent & Substitute Parts

Part Overview

The HLMP-2700 is a dual-segment LED circuit board indicator bar manufactured by Broadcom Limited. This through-hole mounted component features yellow LEDs with a 0.4" x 0.4" form factor, designed for panel-mount indicator applications. The part is currently in active production status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances for this product category.

Substiute Parts

HLMP-2700

Broadcom LimitedIn Stock: 1665HLMP-2700 Datasheet

Current PartRFQ

KB2700YW

KingbrightIn Stock: 997KB2700YW Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The KB2700YW from Kingbright qualifies as a substitute for the HLMP-2700 based on the following critical parameters:

Electrical Compatibility:

• Identical voltage rating (2.1V)
• Dual yellow LED configuration maintained
• Similar wavelength specification (588nm vs. 583nm, within visible yellow spectrum)
• Through-hole mounting type preserved

Mechanical Compatibility:

• Bar - 2 Wide, DIP configuration maintained
• Through-hole mounting preserved for PCB integration

Regulatory Compliance:

• RoHS3 compliant
• REACH unaffected status maintained
• Unlimited moisture sensitivity level (MSL 1)

The KB2700YW operates at 30mA versus the HLMP-2700's 20mA, and provides 24mcd versus 20mcd brightness. These parameters represent acceptable performance variations within the dual-segment LED indicator category.

Parameter Comparison

Engineering Selection Recommendations

Both the HLMP-2700 and KB2700YW maintain active production status with full RoHS3 compliance and REACH unaffected designation. Selection between these parts should be based on circuit design requirements:

The HLMP-2700 operates at 20mA with 20mcd output and is suitable for applications with defined current budgets and brightness specifications.

The KB2700YW operates at 30mA with 24mcd output and includes a diffused white lens. This substitute is appropriate when higher brightness output is acceptable and the circuit design accommodates the increased current draw.

Both parts share identical voltage ratings (2.1V) and dual-segment yellow LED configuration, enabling direct substitution at the PCB level when electrical and optical requirements align.

Frequently Asked Questions (FAQ)

Q: Can KB2700YW replace HLMP-2700 in existing designs?

A: Yes, provided the circuit design accommodates 30mA current draw versus the original 20mA specification. Both parts maintain 2.1V voltage rating and dual-segment yellow LED configuration with through-hole mounting.

Q: What is the wavelength difference between these parts?

A: HLMP-2700 specifies 583nm peak wavelength; KB2700YW specifies 588nm. Both wavelengths fall within the yellow spectrum and are visually equivalent for indicator applications.

Q: Are there packaging differences?

A: HLMP-2700 is supplied in bulk packaging; KB2700YW is supplied in tube packaging. Both are through-hole mounted components with identical electrical and mechanical interfaces.

Q: Do both parts meet the same compliance standards?

A: Yes. Both HLMP-2700 and KB2700YW are RoHS3 compliant, REACH unaffected, and carry unlimited moisture sensitivity rating (MSL 1).

Q: What is the brightness difference?

A: HLMP-2700 provides 20mcd; KB2700YW provides 24mcd. The KB2700YW offers approximately 20% higher brightness output.