HLMP1300 Equivalent & Substitute Parts

Part Overview

The HLMP1300 is a red diffused T-1 through-hole LED manufactured by Everlight Electronics Co Ltd, designed for discrete red LED indication applications. This component features a 2V forward voltage, 2mcd brightness rating, and 635nm peak wavelength with a 90° viewing angle. The part is currently in active product status with 828 units in stock.

Substitute parts are necessary when the HLMP1300 reaches end-of-life status, when alternative manufacturers are required for supply chain diversification, or when design specifications allow for compatible alternatives with equivalent electrical and mechanical characteristics.

Key Parameters

Parameter	HLMP1300 Specification
Manufacturer	Everlight Electronics Co Ltd
Color	Red
Lens Transparency	Diffused
Lens Size	3mm, T-1
Voltage - Forward (Vf) (Typ)	2V
Current - Test	10mA
Millicandela Rating	2mcd
Viewing Angle	90°
Mounting Type	Through Hole
Wavelength - Peak	635nm
Lens Style	Round with Domed Top
Height (Max)	6.30mm
Package / Case	Radial
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the HLMP1300 are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalent: Parts that match all critical electrical and mechanical parameters within the same operating specifications.

Similar Parts: Parts that share the same form factor, mounting type, and general application but may differ in forward voltage, brightness rating, viewing angle, or test current. These parts are suitable for applications where design specifications allow for parameter variation.

The following parameters determine substitution eligibility:

Lens size (3mm, T-1)
Mounting type (Through Hole)
Lens style (Round with Domed Top)
Package type (Radial)
Color (Red)
Lens transparency (Diffused)
RoHS compliance status

Parameter Comparison

Part Number	Manufacturer	Vf (Typ)	Current - Test	mcd Rating	Viewing Angle	Wavelength - Peak	Height (Max)	Product Status	RoHS Status
HLMP1300	Everlight Electronics Co Ltd	2V	10mA	2mcd	90°	635nm	6.30mm	Active	ROHS3 Compliant
MV57640	onsemi	2V	10mA	2mcd	90°	635nm	6.30mm	Obsolete	REACH Unaffected
151031SS06000	Würth Elektronik	2.2V	20mA	35mcd	60°	650nm	5.55mm	Active	ROHS3 Compliant
4300F1LC	Visual Communications Company - VCC	1.8V	2mA	1.8mcd	50°	635nm	6.35mm	Not For New Designs	ROHS3 Compliant
HLMP-1600	Broadcom Limited	5V	10mA	2.1mcd	60°	635nm	6.35mm	Active	ROHS3 Compliant
HLMP-1601	Broadcom Limited	12V	13mA	2.1mcd	60°	635nm	6.35mm	Active	ROHS3 Compliant
HLMP-1700	Broadcom Limited	1.7V	2mA	2.1mcd	50°	635nm	6.35mm	Active	ROHS3 Compliant
HLMP-1700-B0002	Broadcom Limited	1.7V	2mA	2.1mcd	50°	635nm	6.35mm	Active	ROHS3 Compliant
HLMP-K101	Broadcom Limited	1.8V	20mA	45mcd	60°	645nm	6.35mm	Active	ROHS3 Compliant
HLMP-K150	Broadcom Limited	1.7V	1mA	2mcd	60°	660nm	6.35mm	Active	ROHS3 Compliant
HLMP-K150-C0002	Broadcom Limited	1.7V	1mA	2mcd	60°	660nm	6.35mm	Active	ROHS3 Compliant

Engineering Selection Recommendations

Parametric Equivalent (Direct Replacement):

The MV57640 from onsemi is a parametric equivalent to the HLMP1300, matching all critical electrical and mechanical specifications including 2V forward voltage, 10mA test current, 2mcd brightness, and 90° viewing angle. However, the MV57640 is listed as obsolete product status. Selection of this part should be limited to applications where existing inventory is available and long-term supply is not required.

Active Status Alternatives:

For applications requiring active product status with long-term availability, the following parts are suitable based on design flexibility:

HLMP-1700 and HLMP-1700-B0002 (Broadcom Limited): These parts feature 1.7V forward voltage, 2.1mcd brightness, and 50° viewing angle. The primary difference from HLMP1300 is the reduced forward voltage and viewing angle. HLMP-1700-B0002 is supplied in Cut Tape packaging, while HLMP-1700 is supplied in Bulk packaging. Both are ROHS3 compliant and active status.
HLMP-K150 and HLMP-K150-C0002 (Broadcom Limited): These parts feature 1.7V forward voltage, 2mcd brightness, and 60° viewing angle. HLMP-K150-C0002 is supplied in Cut Tape packaging. Both are ROHS3 compliant and active status.
HLMP-1600 (Broadcom Limited): This part features 5V forward voltage and 60° viewing angle with 2.1mcd brightness. Selection is appropriate for applications with higher supply voltage requirements.

Not Recommended for New Designs:

The 4300F1LC from Visual Communications Company is marked as "Not For New Designs" and should not be selected for new applications despite parameter compatibility.

Higher Brightness Alternative:

The 151031SS06000 from Würth Elektronik and HLMP-K101 from Broadcom Limited offer significantly higher brightness ratings (35mcd and 45mcd respectively) with different forward voltages and viewing angles. These parts are suitable only when increased brightness is required and circuit design accommodates the parameter differences.

Frequently Asked Questions (FAQ)

Q: Can the MV57640 be used as a direct replacement for HLMP1300?

A: The MV57640 matches all electrical and mechanical parameters of the HLMP1300 (2V forward voltage, 10mA test current, 2mcd brightness, 90° viewing angle, 635nm peak wavelength). However, the MV57640 is obsolete product status. Direct replacement is possible only if existing inventory is available and supply continuity is not a concern.

Q: What is the primary difference between HLMP-1700 and HLMP1300?

A: The HLMP-1700 operates at 1.7V forward voltage compared to the HLMP1300's 2V, and features a 50° viewing angle compared to the HLMP1300's 90°. The brightness rating is comparable (2.1mcd versus 2mcd). The HLMP-1700 is active status with extensive inventory availability.

Q: Are the HLMP-1700 and HLMP-1700-B0002 electrically identical?

A: Yes, both parts are electrically and mechanically identical. The difference is packaging: HLMP-1700 is supplied in Bulk packaging, while HLMP-1700-B0002 is supplied in Cut Tape (CT) packaging. Selection depends on assembly process requirements.

Q: Can HLMP-K101 replace HLMP1300 in all applications?

A: The HLMP-K101 has significantly higher brightness (45mcd versus 2mcd) and operates at 1.8V forward voltage with 20mA test current. Substitution is only appropriate for applications where increased brightness is required and the circuit design accommodates the higher current draw.

Q: What does "Not For New Designs" mean for the 4300F1LC?

A: This designation indicates the part is in mature or declining product status and should not be selected for new product development. While the part may be electrically compatible, long-term availability and manufacturer support cannot be guaranteed.

Q: How do viewing angle differences affect substitution?

A: Viewing angle determines the cone of light emission. The HLMP1300 has a 90° viewing angle (wide distribution), while alternatives like HLMP-1700 have 50° or 60° viewing angles (narrower distribution). Substitution is appropriate only if the application's optical requirements accommodate the different viewing angle.

Q: Are all listed parts ROHS3 compliant?

A: All parts except MV57640 are explicitly listed as ROHS3 compliant. The MV57640 is listed as REACH Unaffected. Compliance verification is required for applications with specific regulatory requirements.

Q: What is the difference between Bulk and Cut Tape packaging?

A: Bulk packaging supplies components in loose form, suitable for manual assembly or tape-and-reel conversion. Cut Tape (CT) packaging supplies components on adhesive tape in specified quantities, optimized for automated pick-and-place assembly equipment. Selection depends on assembly process capabilities.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message