Equivalent & Substitute Parts Reference: HLE-120-02-G-DV-BE-P-TR

Part Overview

The Samtec Inc. HLE-120-02-G-DV-BE-P-TR is an active rectangular connector part from the HLE series, intended for board-to-board applications. It features a 40-position receptacle (female socket) in a bottom entry configuration, with a pitch of 0.100" (2.54mm), suitable for surface mount solder termination. The part is supplied in Tape & Reel packaging and is compliant with RoHS3 standards, and holds a Moisture Sensitivity Level (MSL) of 1 (Unlimited). Situations such as supply limitations, packaging format requirements, or inventory constraints may necessitate identifying substitute models with identical key electrical and mechanical parameters.

Substiute Parts

HLE-120-02-G-DV-BE-P-TR

Samtec Inc.In Stock: 799HLE-120-02-G-DV-BE-P-TR Datasheet

Current PartRFQ

HLE-120-02-G-DV-BE-K-TR

Samtec Inc.In Stock: 1039HLE-120-02-G-DV-BE-K-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is strictly based on the following key parameters: manufacturer (Samtec Inc.), series (HLE), connector type (receptacle, bottom entry), contact type (female socket), style (board to board), electrical parameters (number of positions, pitch, row configuration, voltage and current rating), mechanical parameters (mounting type, termination, fastening type, insulation height, contact materials and finishes), special features (pick and place), and compliance attributes (RoHS3, MSL). Any alternative part must match all of these criteria to be considered an engineering substitute.

Parameter Comparison

Engineering Selection Recommendations

Both HLE-120-02-G-DV-BE-P-TR and HLE-120-02-G-DV-BE-K-TR are active and fully RoHS3 compliant, with identical moisture sensitivity levels (MSL 1, Unlimited). Selection between these two part numbers can be based on packaging format requirements or inventory levels, as all electrical and mechanical parameters provided are equivalent.

Frequently Asked Questions (FAQ)

Q1: What determines if another part is a suitable substitute for HLE-120-02-G-DV-BE-P-TR?
A1: Suitable substitutes must exactly match the specified parameters: manufacturer, series, connector type, number of positions, pitch, row spacing, mounting/termination methods, materials, finishes, current and voltage ratings, compliance status, and moisture sensitivity level.

Q2: Does packaging type affect interchangeability?
A2: Packaging type (Tape & Reel vs. Cut Tape) does not affect the electrical or mechanical parameters of the component, but may be selected based on assembly process preferences or inventory requirements.

Q3: Are there differences in performance between these substitute parts?
A3: Based on provided parameters, no differences exist in electrical, mechanical, or compliance ratings. Both substitutes satisfy the criteria set for the product category.

Q4: Can HLE-120-02-G-DV-BE-K-TR be used directly in place of HLE-120-02-G-DV-BE-P-TR?
A4: Yes, all required parameters for substitution are matched, enabling direct interchangeability within specified connector, application, and compliance requirements.

Q5: What certifications ensure compatibility for both substitute models?
A5: Both parts are RoHS3 compliant and have Moisture Sensitivity Level 1 (Unlimited), aligning with standard regulations and environmental requirements for this connector category.