HLE-112-02-S-DV-A Equivalent & Substitute Parts

Part Overview

The HLE-112-02-S-DV-A is a 24-position receptacle connector manufactured by Samtec Inc., designed for board-to-board applications with 0.100" (2.54mm) pitch spacing. This surface mount connector features gold-plated mating contacts, push-pull fastening, and operates across -55°C to 125°C. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating.

Substitute parts may be required due to inventory constraints, lead time considerations, or specific application requirements where alternative connector configurations meet the electrical and mechanical specifications of the original design.

Substiute Parts

HLE-112-02-S-DV-A

Samtec Inc.In Stock: 1010HLE-112-02-S-DV-A Datasheet

Current PartRFQ

NPTC062KFMS-RC

Sullins Connector SolutionsIn Stock: 2174NPTC062KFMS-RC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The NPTC062KFMS-RC from Sullins Connector Solutions is listed as a substitute for the HLE-112-02-S-DV-A. Substitution eligibility is determined by the following parameters:

• Pitch - Mating: 0.100" (2.54mm) — matches the original part
• Number of Rows: 2 — matches the original part
• Mounting Type: Surface Mount — matches the original part
• Termination: Solder — matches the original part
• Fastening Type: Push-Pull — matches the original part
• Style: Board to Board — matches the original part
• RoHS Status: ROHS3 Compliant — matches the original part

Parameter Comparison

Engineering Selection Recommendations

Both the HLE-112-02-S-DV-A and NPTC062KFMS-RC are active products with ROHS3 compliance and REACH unaffected status. Selection between these parts must account for the following differences:

The HLE-112-02-S-DV-A provides 24 positions with gold mating contacts, 4.1A per contact current rating, and 400VAC voltage rating across an extended temperature range of -55°C to 125°C. The NPTC062KFMS-RC provides 12 positions with tin mating contacts, 3A per contact current rating, and 250V voltage rating across -40°C to 125°C. Position count, contact finish, current capacity, and voltage rating differ between these parts and must be evaluated against specific application requirements.

Frequently Asked Questions (FAQ)

Q: Can the NPTC062KFMS-RC directly replace the HLE-112-02-S-DV-A?

A: Direct replacement is not possible. The NPTC062KFMS-RC has 12 positions versus 24 positions on the HLE-112-02-S-DV-A. Position count, contact finish material, current rating, and voltage rating differ between the two connectors.

Q: What are the critical differences in electrical performance?

A: The HLE-112-02-S-DV-A supports 4.1A per contact at 400VAC, while the NPTC062KFMS-RC supports 3A per contact at 250V. Applications requiring higher current or voltage must use the HLE-112-02-S-DV-A.

Q: How do the operating temperature ranges differ?

A: The HLE-112-02-S-DV-A operates from -55°C to 125°C, providing a lower temperature limit 15°C below the NPTC062KFMS-RC range of -40°C to 125°C. Applications requiring operation below -40°C require the HLE-112-02-S-DV-A.

Q: What is the significance of contact finish differences?

A: The HLE-112-02-S-DV-A uses gold plating on mating contacts, while the NPTC062KFMS-RC uses tin. Gold provides superior corrosion resistance and contact reliability in demanding environments.

Q: Are both parts RoHS compliant?

A: Yes, both the HLE-112-02-S-DV-A and NPTC062KFMS-RC are ROHS3 compliant and REACH unaffected.