HLE-104-02-S-DV-BE-P-TR Equivalent & Substitute Parts

Part Overview

The HLE-104-02-S-DV-BE-P-TR is an 8-position rectangular receptacle connector manufactured by Samtec Inc., designed for board-to-board applications with surface mount termination. This bottom entry connector features gold-plated mating contacts and operates across a wide temperature range of -55°C to 125°C. The part is currently active in production with 1034 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector series, enabling design flexibility and supply chain optimization.

Substiute Parts

HLE-104-02-S-DV-BE-P-TR

Samtec Inc.In Stock: 1078HLE-104-02-S-DV-BE-P-TR Datasheet

Current PartRFQ

HLE-104-02-S-DV-BE-K-TR

Samtec Inc.In Stock: 1863HLE-104-02-S-DV-BE-K-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the HLE series is determined by strict equivalence across electrical and mechanical parameters. The HLE-104-02-S-DV-BE-K-TR qualifies as a direct substitute based on the following criteria:

Critical Parameters for Substitution:

• Number of positions: 8
• Pitch - Mating: 0.100" (2.54mm)
• Number of rows: 2
• Row spacing - Mating: 0.100" (2.54mm)
• Connector type: Receptacle, Bottom Entry
• Contact type: Female Socket
• Mounting type: Surface Mount
• Termination: Solder
• Contact finish - Mating: Gold
• Current rating: 4.1A per Contact
• Voltage rating: 400VAC
• Operating temperature: -55°C ~ 125°C
• Insulation material: Liquid Crystal Polymer (LCP)
• Contact material: Beryllium Copper
• Packaging: Tape & Reel (TR)
• RoHS status: ROHS3 Compliant

The substitute part maintains identical electrical performance, mechanical compatibility, and environmental specifications, differing only in the fastening type designation within the part number structure.

Parameter Comparison

Engineering Selection Recommendations

Both HLE-104-02-S-DV-BE-P-TR and HLE-104-02-S-DV-BE-K-TR are active production parts with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts is based on inventory availability and supply chain requirements. The HLE-104-02-S-DV-BE-K-TR currently maintains higher inventory levels at 1842 units compared to 1034 units for the primary part number. Both parts meet the same environmental, thermal, and electrical performance criteria for board-to-board rectangular connector applications requiring 8-position, 0.100" pitch surface mount receptacles with gold-plated contacts.

Frequently Asked Questions (FAQ)

Q: Can HLE-104-02-S-DV-BE-K-TR be used as a direct replacement for HLE-104-02-S-DV-BE-P-TR?

A: Yes. Both parts maintain identical electrical ratings (4.1A per contact, 400VAC), mechanical dimensions (8 positions, 0.100" pitch, 2 rows), contact specifications (gold-plated beryllium copper), and operating temperature range (-55°C to 125°C). The parts are functionally equivalent for board-to-board surface mount applications.

Q: What is the difference between these two part numbers?

A: The part numbers differ in the fastening type designation within the Samtec HLE series nomenclature. All other specifications, including connector type, contact configuration, termination method, and performance ratings, are identical.

Q: Are both parts available in the same packaging format?

A: Yes. Both HLE-104-02-S-DV-BE-P-TR and HLE-104-02-S-DV-BE-K-TR are supplied in Tape & Reel (TR) packaging, suitable for automated pick-and-place assembly processes.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), meeting the same regulatory and environmental requirements.

Q: What is the current rating per contact for these connectors?

A: Both parts are rated for 4.1A per contact at a maximum voltage of 400VAC, suitable for standard signal and low-power applications in board-to-board interconnect designs.