HLCP-D100-BC000 Equivalent & Substitute Parts

Part Overview

The HLCP-D100-BC000 is a LED Circuit Board Indicator Bar featuring 2 wide DIP configuration with dual red LEDs. This through-hole component operates at 1.8V with 20mA current rating and 7.5mcd brightness output at 645nm peak wavelength. The part is currently classified as obsolete, making identification of suitable substitutes essential for ongoing production support and design continuity.

Substiute Parts

HLCP-D100-BC000

Broadcom LimitedIn Stock: 838HLCP-D100-BC000 Datasheet

Current PartRFQ

HLCP-D100

Broadcom LimitedIn Stock: 2219HLCP-D100 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HLCP-D100-BC000 is determined by strict alignment across the following critical parameters:

• Color specification: Red (x 2)
• Wavelength - Peak: 645nm
• Configuration: Bar - 2 Wide, DIP
• Current Rating: 20mA
• Millicandela Rating: 7.5mcd
• Voltage Rating: 1.8V
• Mounting Type: Through Hole
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• ECCN: EAR99

The HLCP-D100 qualifies as a direct substitute based on complete parameter alignment across all electrical and mechanical specifications. The primary distinction is product status: HLCP-D100 is active and available in higher inventory quantities, whereas HLCP-D100-BC000 is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The HLCP-D100 is the direct substitute for HLCP-D100-BC000. Both parts are manufactured by Broadcom Limited and maintain identical electrical and mechanical specifications across all critical parameters. The HLCP-D100 offers the advantage of active product status with significantly higher inventory availability (2192 units versus 752 units). Both parts maintain REACH Unaffected status and EAR99 ECCN classification, ensuring consistent regulatory compliance. The HLCP-D100 is suitable for direct replacement in applications currently specified for HLCP-D100-BC000 without circuit redesign or performance modification.

Frequently Asked Questions (FAQ)

Q: Can HLCP-D100 be used as a direct replacement for HLCP-D100-BC000?

A: Yes. Both parts share identical electrical ratings (1.8V, 20mA), optical specifications (645nm, 7.5mcd, Red x 2), configuration (Bar - 2 Wide, DIP), and mounting type (Through Hole). No circuit modifications are required.

Q: What is the primary difference between these parts?

A: HLCP-D100-BC000 is obsolete, while HLCP-D100 is active. The HLCP-D100 also has higher inventory availability. All functional and electrical parameters are identical.

Q: Are there packaging differences between HLCP-D100-BC000 and HLCP-D100?

A: HLCP-D100-BC000 is specified with "-" packaging, while HLCP-D100 is supplied in Bulk packaging. Both are through-hole components with identical physical configuration.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts maintain REACH Unaffected status, EAR99 ECCN classification, and Moisture Sensitivity Level 1 (Unlimited).

Q: Which part should be selected for new designs?

A: HLCP-D100 should be selected for new designs due to active product status and higher inventory availability.