HIP4020IB Equivalent & Substitute Parts

Part Overview

The HIP4020IB is a half bridge driver IC manufactured by Renesas Electronics Corporation, designed for driving inductive loads including DC motors, relays, solenoids, and stepper motors. This device integrates dual output channels with 500mA per channel capability and operates across a 3V to 12V supply voltage range. The HIP4020IB is classified as obsolete, making identification of active equivalent parts essential for new designs and ongoing production support.

Substiute Parts

HIP4020IB

Renesas Electronics CorporationIn Stock: 3769HIP4020IB Datasheet

Current PartRFQ

HIP4020IBZ

Renesas Electronics CorporationIn Stock: 1178HIP4020IBZ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The HIP4020IBZ qualifies as a direct substitute for the HIP4020IB based on the following criteria:

Electrical Parameters Match:

• Identical output configuration (Half Bridge with 2 channels)
• Identical current rating (500mA per channel)
• Identical supply voltage range (3V ~ 12V)
• Identical load voltage range (2.5V ~ 15V)
• Identical operating temperature range (-40°C ~ 125°C)

Mechanical Parameters Match:

• Identical package type (20-SOIC)
• Identical package dimensions (0.295", 7.50mm Width)
• Identical mounting type (Surface Mount)

Functional Parameters Match:

• Identical output configuration and applications
• Identical fault protection mechanisms (Current Limiting, Over Temperature)
• Identical status flag feature

The substitution is valid because all critical electrical, mechanical, and functional parameters remain unchanged between the two part numbers.

Parameter Comparison

Engineering Selection Recommendations

The HIP4020IBZ is the appropriate selection for applications currently using or requiring the HIP4020IB. The substitute part maintains full electrical and mechanical compatibility while offering the following advantages:

Product Status: The HIP4020IBZ carries Active product status, ensuring continued availability and manufacturer support, whereas the HIP4020IB is classified as Obsolete.

Compliance: The HIP4020IBZ is ROHS3 compliant, meeting current environmental and regulatory requirements. The HIP4020IB is RoHS non-compliant.

Packaging: The HIP4020IBZ is supplied in Tube packaging, providing standardized handling and storage conditions suitable for production environments.

Moisture Sensitivity: The HIP4020IBZ specifies MSL 3 (168 Hours), indicating standard moisture sensitivity handling requirements for surface mount assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the HIP4020IBZ directly replace the HIP4020IB in existing designs?

A: Yes. All electrical parameters, output configuration, current ratings, voltage ranges, operating temperature, and package specifications are identical. Direct pin-for-pin substitution is valid.

Q: What is the difference between HIP4020IB and HIP4020IBZ?

A: The primary differences are product status (Obsolete vs. Active), RoHS compliance (non-compliant vs. ROHS3 compliant), packaging format (unspecified vs. Tube), and moisture sensitivity level (MSL 1 vs. MSL 3). Electrical and mechanical specifications are identical.

Q: Are there any application limitations when switching from HIP4020IB to HIP4020IBZ?

A: No. Both parts support identical applications including DC motors, relays, solenoids, and stepper motors with the same current and voltage specifications.

Q: What packaging considerations apply to the HIP4020IBZ?

A: The HIP4020IBZ is supplied in Tube packaging with MSL 3 rating. Standard moisture sensitivity handling procedures for surface mount components apply during storage and assembly.

Q: Is the 20-SOIC package identical between both parts?

A: Yes. Both parts use the 20-SOIC package with 0.295" (7.50mm) width. PCB footprints and assembly processes remain unchanged.