HEG.0B.302.CLLP Equivalent & Substitute Parts

Part Overview

The HEG.0B.302.CLLP is a 2-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for panel mount applications with bulkhead front-side nut fastening and operates across a temperature range of -20°C to 100°C. The part maintains active product status with 1142 units in current inventory. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component interchange based on equivalent electrical and mechanical specifications.

Substiute Parts

HEG.0B.302.CLLP

LEMOIn Stock: 1172HEG.0B.302.CLLP Datasheet

Current PartRFQ

G80L0C-P02LJG0-0000

ODUIn Stock: 700G80L0C-P02LJG0-0000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HEG.0B.302.CLLP is determined by the following critical parameters:

• Connector type: Receptacle with female sockets
• Position count: 2-position configuration
• Termination method: Solder cup
• Mounting configuration: Panel mount with bulkhead front-side nut
• Fastening mechanism: Push-pull
• Ingress protection: IP68 rating
• Shielding: Shielded design
• Insert material: PEEK
• Contact finish: Gold plating on mating surfaces
• Regulatory compliance: ROHS3 and REACH status

The substitute part G80L0C-P02LJG0-0000 (ODU MINI-SNAP® L series) satisfies these core substitution criteria. Both parts maintain identical connector type, position count, termination method, mounting type, fastening mechanism, ingress protection rating, shielding configuration, insert material, contact finish, and regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the HEG.0B.302.CLLP and G80L0C-P02LJG0-0000 maintain active product status and full compliance with ROHS3 and REACH regulations. The primary distinction between these parts lies in current rating and operating temperature range. The LEMO part supports 10A current capacity across -20°C to 100°C, while the ODU substitute supports 7.5A across -40°C to 120°C. Selection between these parts depends on application-specific current and temperature requirements. Both parts are suitable for industrial, medical, military, and testing equipment applications where IP68 ingress protection and shielded 2-position solder cup termination are required.

Frequently Asked Questions (FAQ)

Q: Can G80L0C-P02LJG0-0000 be used as a direct replacement for HEG.0B.302.CLLP?

A: Both parts share identical connector type, position count, termination method, mounting configuration, fastening mechanism, ingress protection rating, shielding, and insert material. Substitution is permissible when application current requirements do not exceed 7.5A and operating temperature remains within -40°C to 120°C.

Q: What are the key differences between these two parts?

A: The HEG.0B.302.CLLP provides 10A current capacity with -20°C to 100°C operating range. The G80L0C-P02LJG0-0000 provides 7.5A current capacity with -40°C to 120°C operating range. Shell finish differs: LEMO uses chrome, while ODU uses chrome over nickel.

Q: Are both parts compliant with industry standards?

A: Both parts maintain ROHS3 compliance and REACH unaffected status. Both carry MSL rating 1 (unlimited moisture sensitivity level).

Q: What is the inventory status for substitute parts?

A: The HEG.0B.302.CLLP has 1142 units in stock. The G80L0C-P02LJG0-0000 has 675 units in stock.

Q: Do these connectors support the same solder cup termination process?

A: Both parts feature solder cup termination and are suitable for identical soldering procedures and equipment.