HDMR-19-02-S-SM-PF HDMI Receptacle Connector Equivalent & Substitute Parts

Part Overview

The HDMR-19-02-S-SM-PF is an HDMI receptacle connector manufactured by Samtec Inc., designed for 19-position surface mount applications with right-angle through-hole termination. This connector is actively produced and widely used in high-speed I/O applications requiring shielded HDMI connectivity. Substitute parts are identified to provide design flexibility, inventory alternatives, and continuity of supply for equivalent electrical and mechanical configurations.

Substiute Parts

HDMR-19-02-S-SM-PF

Samtec Inc.In Stock: 759HDMR-19-02-S-SM-PF Datasheet

Current PartRFQ

HDMR-19-01-S-SM-PF

Samtec Inc.In Stock: 2256HDMR-19-01-S-SM-PF Datasheet

Parametric EquivalentRFQ

HDMR-19-02-F-SM-PF

Samtec Inc.In Stock: 758HDMR-19-02-F-SM-PF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HDMR-19-02-S-SM-PF are qualified based on strict equivalence of the following parameters:

• Connector Type: HDMI
• Number of Contacts: 19
• Gender: Receptacle
• Mounting Type: Surface Mount, Right Angle; Through Hole
• Mounting Feature: Flange, Horizontal
• Termination: Solder
• Current Rating: 1.3A per Contact
• Voltage - Rated: 40VAC
• Operating Temperature: -25°C ~ 85°C
• Mating Cycles: 100
• Shielding: Shielded
• Contact Finish: Gold
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• Product Status: Active

All identified substitutes maintain identical electrical performance and mechanical compatibility within these parameters. Variations in shell/shielding material (where specified) do not affect functional equivalence for this connector category.

Parameter Comparison

Engineering Selection Recommendations

All three connectors—HDMR-19-02-S-SM-PF, HDMR-19-01-S-SM-PF, and HDMR-19-02-F-SM-PF—are active products from Samtec Inc. with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability and lead time requirements
• Specific PCB layout constraints related to connector orientation or mounting feature variations
• Supply chain continuity and long-term availability forecasts

All three parts satisfy equivalent functional requirements for 19-position HDMI receptacle applications with surface mount, right-angle, through-hole termination.

Frequently Asked Questions (FAQ)

Q: Can HDMR-19-01-S-SM-PF be used as a direct replacement for HDMR-19-02-S-SM-PF?

A: Yes. Both connectors share identical electrical ratings (1.3A per contact, 40VAC), mechanical mounting configuration (surface mount, right angle, through hole), and compliance certifications (ROHS3). They are functionally equivalent for HDMI receptacle applications.

Q: What is the difference between HDMR-19-02-S-SM-PF and HDMR-19-02-F-SM-PF?

A: The primary difference is in the connector designation suffix. Both maintain identical electrical specifications, contact count (19), mounting type (surface mount, right angle, through hole), and performance ratings. The variation in part number reflects design or manufacturing process differences that do not affect functional compatibility.

Q: Are all three connectors suitable for the same PCB footprint?

A: All three connectors share the same mounting type (surface mount, right angle, through hole) and mounting feature (flange, horizontal). PCB footprint compatibility depends on specific mechanical dimensions not provided in the parametric data. Consult detailed mechanical drawings from Samtec Inc. for precise footprint verification.

Q: Do these connectors have different shelf life or storage requirements?

A: All three connectors have identical Moisture Sensitivity Level (MSL 1 - Unlimited), indicating no special storage or handling requirements beyond standard component storage practices.

Q: Which connector should be selected for new designs?

A: Selection should be based on current inventory availability, supplier lead times, and long-term product roadmap. All three parts are active products with equivalent performance characteristics and are suitable for new design implementations.