HCPL-814-060E Equivalent & Substitute Parts

Part Overview

The HCPL-814-060E is an optoisolator with transistor output manufactured by Broadcom Limited. This 4-DIP through-hole component provides 5000Vrms isolation and is designed for applications requiring galvanic isolation between input and output circuits. The part is currently active in production with robust inventory availability. Equivalent and substitute parts are identified when component availability is constrained, supply chain disruptions occur, or design flexibility permits alternative sourcing from qualified manufacturers meeting identical or superior electrical and mechanical specifications.

Key Parameters

Parameter	Value
Manufacturer Part Number	HCPL-814-060E
Manufacturer	Broadcom Limited
Category	Optoisolators
Number of Channels	1
Voltage - Isolation	5000Vrms
Current Transfer Ratio (Min)	20% @ 1mA
Current Transfer Ratio (Max)	300% @ 1mA
Rise / Fall Time (Typ)	4µs, 3µs
Input Type	AC, DC
Output Type	Transistor
Voltage - Output (Max)	35V
Current - Output / Channel	50mA
Voltage - Forward (Vf) (Typ)	1.2V
Current - DC Forward (If) (Max)	50mA
Vce Saturation (Max)	200mV
Operating Temperature	-30°C ~ 100°C
Mounting Type	Through Hole
Package / Case	4-DIP (0.300", 7.62mm)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitute parts for the HCPL-814-060E are qualified based on the following criteria:

Critical Parameters for Substitution:

Number of Channels: 1
Voltage - Isolation: 5000Vrms or higher
Current Transfer Ratio range: 20% to 300% @ 1mA
Output Type: Transistor
Voltage - Output (Max): 35V or higher
Current - Output / Channel: 50mA or higher
Package / Case: 4-DIP (0.300", 7.62mm)
Mounting Type: Through Hole
RoHS Status: ROHS3 Compliant

Substitutes are grouped into two categories:

Parametric Equivalents: Parts meeting or exceeding all critical electrical parameters with identical package and mounting specifications.

Direct Manufacturer Alternatives: Parts from alternative manufacturers with equivalent or superior isolation voltage and identical mechanical form factor.

Parameter Comparison

Parameter	HCPL-814-060E (Broadcom)	HCPL-814-000E (Broadcom)	LTV-814 (Lite-On)	ISP814X (Isocom)
Voltage - Isolation	5000Vrms	5000Vrms	5000Vrms	5300Vrms
Current Transfer Ratio (Min)	20% @ 1mA	20% @ 1mA	20% @ 1mA	20% @ 1mA
Current Transfer Ratio (Max)	300% @ 1mA	300% @ 1mA	300% @ 1mA	300% @ 1mA
Rise / Fall Time (Typ)	4µs, 3µs	4µs, 3µs	4µs, 3µs	4µs, 3µs
Voltage - Output (Max)	35V	35V	35V	35V
Current - Output / Channel	50mA	50mA	50mA	50mA
Vce Saturation (Max)	200mV	200mV	200mV	200mV
Operating Temperature	-30°C ~ 100°C	-30°C ~ 100°C	-30°C ~ 110°C	-30°C ~ 100°C
Package / Case	4-DIP (0.300", 7.62mm)	4-DIP (0.300", 7.62mm)	4-DIP (0.300", 7.62mm)	4-DIP (0.300", 7.62mm)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

All listed substitute parts maintain active product status and ROHS3 compliance. Selection between HCPL-814-060E and its equivalents is based on availability and supply chain considerations rather than electrical performance differences.

HCPL-814-000E (Broadcom Limited): Parametric equivalent with identical electrical specifications. Suitable for direct substitution where Broadcom sourcing is preferred or required.

LTV-814 (Lite-On Inc.): Direct manufacturer alternative with extended operating temperature range to 110°C. Meets all critical isolation, output, and timing specifications. Higher inventory availability supports supply chain flexibility.

ISP814X (Isocom Components 2004 LTD): Parametric equivalent with superior isolation voltage rating of 5300Vrms. Meets or exceeds all electrical requirements. Limited inventory availability.

All parts are through-hole mounted in 4-DIP packages with identical pinout compatibility and mechanical footprint.

Frequently Asked Questions (FAQ)

Q: Can HCPL-814-000E replace HCPL-814-060E directly?

A: Yes. Both parts are manufactured by Broadcom Limited with identical electrical specifications, isolation voltage, current transfer ratio, timing characteristics, and 4-DIP package configuration. Direct substitution is supported.

Q: What is the difference between HCPL-814-060E and LTV-814?

A: Both parts meet identical isolation voltage (5000Vrms), current transfer ratio, output voltage, and current specifications. The LTV-814 extends the operating temperature range to 110°C compared to 100°C for the HCPL-814-060E. LTV-814 is manufactured by Lite-On Inc. and offers higher inventory availability.

Q: Is ISP814X a suitable replacement?

A: Yes. ISP814X meets all critical electrical parameters and exceeds the isolation voltage specification at 5300Vrms. The 4-DIP package and through-hole mounting are identical. ISP814X is manufactured by Isocom Components 2004 LTD.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. HCPL-814-000E, LTV-814, and ISP814X are all ROHS3 compliant, matching the compliance status of the HCPL-814-060E.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. All listed parts share identical 4-DIP (0.300", 7.62mm) package dimensions and through-hole mounting specifications. PCB footprints and pinout assignments are compatible across all parts.

Q: What inventory levels are available for each part?

A: HCPL-814-060E: 29,100 pcs; HCPL-814-000E: 2,847 pcs; LTV-814: 57,024 pcs; ISP814X: 867 pcs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message