HCPL-7710#560 Equivalent & Substitute Parts

Part Overview

The HCPL-7710#560 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. It provides 3750Vrms isolation with push-pull, totem pole output configuration and supports data rates up to 12.5MBd. The device is packaged in an 8-DIP gull wing surface mount configuration.

This part is discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and maintenance applications.

Substiute Parts

HCPL-7710#560

Broadcom LimitedIn Stock: 1047HCPL-7710#560 Datasheet

Current PartRFQ

HCPL-7710-560E

Broadcom LimitedIn Stock: 896HCPL-7710-560E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HCPL-7710#560 is based on strict electrical and mechanical parameter matching. The following criteria determine valid equivalents:

• Isolation voltage: 3750Vrms minimum
• Common mode transient immunity: 10kV/µs minimum
• Output configuration: Push-pull, totem pole
• Data rate: 12.5MBd minimum
• Output current: 10 mA per channel
• Supply voltage range: 4.5V ~ 5.5V
• Package type: 8-SMD, gull wing
• Single channel configuration
• Logic input type

The HCPL-7710-560E meets all specified parameters and is classified as a direct manufacturer equivalent.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-7710-560E is the direct substitute for the HCPL-7710#560. Both parts share identical electrical and mechanical specifications, including isolation voltage, CMTI rating, data rate, propagation delay, and package configuration.

The primary distinction is product status and compliance. The HCPL-7710#560 is discontinued, while the HCPL-7710-560E maintains active product status. Additionally, the HCPL-7710-560E is ROHS3 compliant, whereas the original part is RoHS non-compliant. Both parts carry REACH Unaffected status and EAR99 ECCN classification.

For new designs and ongoing production, the HCPL-7710-560E is the appropriate selection due to its active availability and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-7710-560E be used as a direct replacement for the HCPL-7710#560?

A: Yes. Both parts are manufactured by Broadcom Limited and share identical electrical parameters, including isolation voltage (3750Vrms), CMTI (10kV/µs), data rate (12.5MBd), output current (10 mA), and propagation delay (40ns). The package configuration (8-SMD, gull wing) and pin assignments are identical, enabling direct substitution at the board level.

Q: What is the difference between HCPL-7710#560 and HCPL-7710-560E?

A: The HCPL-7710-560E is the active production variant of the same base product (HCPL-7710). The primary differences are product status (active versus discontinued) and RoHS compliance (ROHS3 compliant versus non-compliant). All electrical and mechanical specifications remain unchanged.

Q: Are there any packaging differences between these parts?

A: The HCPL-7710#560 is supplied in standard packaging, while the HCPL-7710-560E is supplied in Tape & Reel (TR) format. Both use the same 8-SMD gull wing package configuration. The tape and reel format is standard for surface mount production environments.

Q: What parameters must match for a valid substitute?

A: Valid substitutes must maintain the following parameters: 3750Vrms isolation voltage, 10kV/µs CMTI minimum, push-pull totem pole output, 12.5MBd data rate, 10 mA output current per channel, 4.5V to 5.5V supply voltage range, and 8-SMD gull wing package configuration.

Q: Is the HCPL-7710-560E suitable for applications requiring RoHS compliance?

A: Yes. The HCPL-7710-560E is ROHS3 compliant, making it suitable for applications and markets requiring RoHS certification. The original HCPL-7710#560 is RoHS non-compliant.