HCPL-7710#360 Equivalent & Substitute Parts

Part Overview

The HCPL-7710#360 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. It provides 3750Vrms isolation with push-pull totem pole output configuration, supporting data rates up to 12.5MBd. The device is packaged in an 8-DIP gull wing surface mount configuration.

This part is discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and replacement applications.

Substiute Parts

HCPL-7710#360

Broadcom LimitedIn Stock: 869HCPL-7710#360 Datasheet

Current PartRFQ

HCPL-7710-360E

Broadcom LimitedIn Stock: 3152HCPL-7710-360E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-7710#360 must maintain electrical and mechanical compatibility based on the following critical parameters:

• Isolation Voltage: 3750Vrms minimum
• Output Configuration: Push-pull totem pole topology
• Data Rate: 12.5MBd
• Common Mode Transient Immunity: 10kV/µs minimum
• Package Type: 8-DIP gull wing surface mount
• Supply Voltage Range: 4.5V ~ 5.5V
• Output Current: 10 mA per channel
• Single Channel Configuration: 1 channel input, 0 channels on side 2

The HCPL-7710-360E qualifies as a direct substitute, meeting all specified electrical parameters and maintaining identical package configuration. The primary distinction is product status and compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-7710-360E is the direct substitute for the HCPL-7710#360. Both parts share identical electrical specifications and package configuration, ensuring pin-for-pin and functional compatibility.

The HCPL-7710-360E offers the advantage of active product status with current manufacturing support. Additionally, it carries ROHS3 compliance certification, whereas the original part is RoHS non-compliant. For new designs or production requiring regulatory compliance, the HCPL-7710-360E is the appropriate selection.

Both parts maintain REACH Unaffected status and EAR99 export classification.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-7710-360E be used as a direct replacement for the HCPL-7710#360?

A: Yes. The HCPL-7710-360E is electrically and mechanically identical to the HCPL-7710#360. All electrical parameters, including isolation voltage, data rate, propagation delay, and output current, are matched. The 8-DIP gull wing package configuration is identical, enabling direct substitution in existing designs.

Q: What is the difference between HCPL-7710#360 and HCPL-7710-360E?

A: The primary differences are product status and compliance certification. The HCPL-7710#360 is discontinued and RoHS non-compliant. The HCPL-7710-360E is an active product with ROHS3 compliance. Electrical and mechanical specifications are identical.

Q: Are there inventory considerations when selecting between these parts?

A: The HCPL-7710#360 has 796 pieces in stock as new original inventory. The HCPL-7710-360E has 3100 pieces available in tube packaging. For ongoing production requirements, the HCPL-7710-360E offers superior availability.

Q: Does the package type affect compatibility?

A: Both parts use the same 8-DIP gull wing surface mount package. The HCPL-7710-360E is supplied in tube packaging, while the HCPL-7710#360 packaging specification is not detailed. This does not affect electrical or mechanical compatibility on the PCB.

Q: What are the critical parameters for substitution in optoisolator selection?

A: For the HCPL-7710 series, substitution compatibility is determined by isolation voltage (3750Vrms), output topology (push-pull totem pole), data rate (12.5MBd), common mode transient immunity (10kV/µs), supply voltage range (4.5V ~ 5.5V), and package configuration (8-DIP gull wing). All these parameters must match for functional equivalence.