HCPL-7510-500 Equivalent & Substitute Parts

Part Overview

The HCPL-7510-500 is an isolation amplifier integrated circuit manufactured by Broadcom Limited, designed for single-circuit isolation applications in 8-DIP Gull Wing surface mount packaging. This component provides galvanic isolation with a -3dB bandwidth of 100 kHz and operates across a 4.5 V to 5.5 V supply range.

The HCPL-7510-500 is currently discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure component availability, and support ongoing production requirements for systems utilizing this isolation amplifier topology.

Substiute Parts

HCPL-7510-500

Broadcom LimitedIn Stock: 694HCPL-7510-500 Datasheet

Current PartRFQ

HCPL-7510-500E

Broadcom LimitedIn Stock: 2800HCPL-7510-500E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HCPL-7510-500 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier Type: Isolation
• Number of Circuits: 1
• -3dB Bandwidth: 100 kHz
• Current - Input Bias: 600 nA
• Voltage - Input Offset: 600 µV
• Current - Supply: 11.7 mA
• Current - Output / Channel: 16 mA
• Voltage - Supply Span: 4.5 V to 5.5 V
• Operating Temperature Range: -40°C ~ 85°C

Mechanical Equivalence Criteria:

• Package / Case: 8-SMD, Gull Wing
• Mounting Type: Surface Mount
• Moisture Sensitivity Level: 1 (Unlimited)

Parts meeting all electrical and mechanical parameters are classified as direct substitutes. The HCPL-7510-500E satisfies all equivalence criteria and is therefore a valid substitute.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-7510-500E is a direct electrical and mechanical equivalent to the HCPL-7510-500. Both parts share identical functional specifications across all critical isolation amplifier parameters, including bandwidth, bias current, offset voltage, supply current, output current, supply voltage range, and operating temperature range. Both utilize the same 8-SMD Gull Wing package with surface mount configuration.

The primary distinction between these parts is product status and regulatory compliance. The HCPL-7510-500 is discontinued and carries RoHS non-compliant status. The HCPL-7510-500E is currently active in production and meets ROHS3 compliance requirements. For new designs or ongoing production requiring regulatory compliance, the HCPL-7510-500E is the appropriate selection. For legacy system maintenance where RoHS compliance is not a requirement, either part satisfies the functional specification.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-7510-500E be used as a direct replacement for the HCPL-7510-500?

A: Yes. The HCPL-7510-500E is electrically and mechanically equivalent to the HCPL-7510-500. All isolation amplifier parameters, supply specifications, operating temperature range, and package configuration are identical. Both parts are manufactured by Broadcom Limited and utilize the same 8-SMD Gull Wing surface mount package.

Q: What is the primary difference between these two part numbers?

A: The HCPL-7510-500 is discontinued and RoHS non-compliant. The HCPL-7510-500E is an active production part with ROHS3 compliance. The functional performance and electrical characteristics are identical.

Q: Are there any package or mounting differences between these parts?

A: No. Both the HCPL-7510-500 and HCPL-7510-500E use identical 8-SMD Gull Wing surface mount packaging. PCB layout, footprint, and assembly processes are compatible between the two parts.

Q: What packaging options are available for the HCPL-7510-500E?

A: The HCPL-7510-500E is supplied in Cut Tape (CT) and Digi-Reel® packaging formats.

Q: Is the HCPL-7510-500E suitable for applications requiring RoHS compliance?

A: Yes. The HCPL-7510-500E meets ROHS3 compliance requirements and is suitable for applications with regulatory compliance mandates.