HCPL-7510-060 Equivalent & Substitute Parts

Part Overview

The HCPL-7510-060 is an isolation amplifier integrated circuit manufactured by Broadcom Limited, designed for single-circuit isolation applications in 8-DIP through-hole packaging. This component provides galvanic isolation with a -3dB bandwidth of 100 kHz and operates across a 4.5V to 5.5V supply voltage range.

The HCPL-7510-060 is currently discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for new production runs, repairs, and system upgrades.

Substiute Parts

HCPL-7510-060

Broadcom LimitedIn Stock: 1164HCPL-7510-060 Datasheet

Current PartRFQ

HCPL-7510-060E

Broadcom LimitedIn Stock: 1099HCPL-7510-060E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-7510-060 are identified based on strict electrical and mechanical parameter matching within the isolation amplifier category. The substitution criteria are:

Electrical Parameters (Must Match):

• Amplifier Type: Isolation
• Number of Circuits: 1
• -3dB Bandwidth: 100 kHz
• Current - Input Bias: 600 nA
• Voltage - Input Offset: 600 µV
• Current - Supply: 11.7 mA
• Current - Output / Channel: 16 mA
• Voltage - Supply Span: 4.5V to 5.5V
• Operating Temperature Range: -40°C to 85°C

Mechanical Parameters (Must Match):

• Package / Case: 8-DIP (0.300", 7.62mm)
• Mounting Type: Through Hole

The HCPL-7510-060E qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility. The primary difference is packaging format (Tube vs. standard packaging) and product status (Active vs. Discontinued).

Parameter Comparison

Engineering Selection Recommendations

The HCPL-7510-060E is the direct substitute for the discontinued HCPL-7510-060. Both components share identical electrical and mechanical specifications, ensuring pin-for-pin and functional compatibility in circuit designs.

Product Status Consideration: The HCPL-7510-060E maintains Active product status, providing long-term availability and supply chain reliability compared to the discontinued HCPL-7510-060.

Compliance Consideration: The HCPL-7510-060E is ROHS3 Compliant, whereas the original HCPL-7510-060 is RoHS non-compliant. For applications subject to RoHS regulations or environmental compliance requirements, the HCPL-7510-060E is the appropriate selection.

Packaging Consideration: The HCPL-7510-060E is supplied in Tube packaging, which may differ from the original component's packaging format. Verify packaging compatibility with assembly equipment and handling procedures.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-7510-060E be used as a direct replacement for the HCPL-7510-060?

A: Yes. The HCPL-7510-060E is electrically and mechanically identical to the HCPL-7510-060. All electrical parameters, including bandwidth, bias current, offset voltage, supply current, output current, supply voltage range, and operating temperature range are identical. Both components use the same 8-DIP through-hole package.

Q: What is the primary difference between these two parts?

A: The HCPL-7510-060E is the active production variant with ROHS3 compliance and Tube packaging. The HCPL-7510-060 is discontinued and RoHS non-compliant. Functionally, they are equivalent.

Q: Are there any compatibility concerns when substituting the HCPL-7510-060E for the HCPL-7510-060?

A: No compatibility concerns exist at the electrical or mechanical level. Pin configuration, signal characteristics, and power requirements are identical. Verify that Tube packaging is compatible with your assembly and handling processes.

Q: Does the ROHS3 compliance of the HCPL-7510-060E affect circuit performance?

A: No. RoHS compliance status reflects manufacturing and material standards, not electrical performance. The HCPL-7510-060E delivers identical electrical characteristics to the original part.

Q: What is the base product number for these components?

A: Both the HCPL-7510-060 and HCPL-7510-060E share the base product number HCPL-7510, indicating they are variants of the same isolation amplifier platform.