HCPL-4562-020E Equivalent & Substitute Parts

Part Overview

The HCPL-4562-020E is an optoisolator transistor with base output manufactured by Broadcom Limited. This 8-DIP through-hole component provides 5000Vrms isolation with a single channel, DC input, and transistor output with base connection. The part is active and in stock with 1109 units available. Substitute parts are identified to address application requirements, inventory availability, or specific performance characteristics while maintaining electrical and mechanical compatibility within the optoisolator category.

Substiute Parts

HCPL-4562-020E

Broadcom LimitedIn Stock: 1129HCPL-4562-020E Datasheet

Current PartRFQ

6N136-X001

Vishay Semiconductor Opto DivisionIn Stock: 45196N136-X001 Datasheet

MFR RecommendedRFQ

PS8501-AX

Renesas Electronics CorporationIn Stock: 2012PS8501-AX Datasheet

MFR RecommendedRFQ

PS8501-V-AX

Renesas Electronics CorporationIn Stock: 919PS8501-V-AX Datasheet

MFR RecommendedRFQ

PS8501L1-AX

Renesas Electronics CorporationIn Stock: 85687PS8501L1-AX Datasheet

MFR RecommendedRFQ

PS8501L1-V-AX

Renesas Electronics CorporationIn Stock: 829PS8501L1-V-AX Datasheet

MFR RecommendedRFQ

SFH6136-X001

Vishay Semiconductor Opto DivisionIn Stock: 1984SFH6136-X001 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HCPL-4562-020E are qualified based on the following criteria:

Electrical Compatibility:

• Single channel optoisolator configuration
• Transistor output with base connection
• Isolation voltage rating of 5000Vrms or higher
• DC input type
• Output current capability of 8mA per channel
• Compatible operating temperature range or extended range

Mechanical Compatibility:

• 8-DIP package format
• Through-hole mounting type
• Pin pitch and physical dimensions suitable for direct PCB substitution

Regulatory & Compliance:

• ROHS3 compliance
• MSL rating of 1 (Unlimited)
• Active product status

Substitute parts are grouped into two categories: direct pin-compatible replacements with identical package dimensions (0.300", 7.62mm) and functionally equivalent alternatives with extended package spacing (0.400", 10.16mm) that require PCB layout verification.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active product status and ROHS3 compliance, ensuring regulatory alignment with the HCPL-4562-020E. Selection between substitutes depends on specific application requirements:

Direct Package Compatibility (0.300", 7.62mm): The 6N136-X001, PS8501-AX, PS8501-V-AX, and SFH6136-X001 maintain identical package dimensions to the HCPL-4562-020E and require no PCB layout modification. These parts are suitable for direct socket replacement in existing designs.

Extended Package Spacing (0.400", 10.16mm): The PS8501L1-AX and PS8501L1-V-AX feature increased pin pitch and require PCB layout verification before implementation. These parts are suitable only for new designs or boards with compatible footprints.

Isolation Voltage Consideration: The 6N136-X001 and SFH6136-X001 provide 5300Vrms isolation, exceeding the 5000Vrms specification of the HCPL-4562-020E. All other substitutes match the 5000Vrms isolation rating.

Output Voltage Rating: The PS8501 series (PS8501-AX, PS8501-V-AX, PS8501L1-AX, PS8501L1-V-AX) support 35V maximum output voltage, compared to 20V for the HCPL-4562-020E and 15V for the 6N136-X001. The SFH6136-X001 supports 25V output voltage.

Temperature Range: All substitute parts support -55°C to 100°C operating temperature, extending the -40°C to 85°C range of the HCPL-4562-020E.

Frequently Asked Questions (FAQ)

Q: Can the 6N136-X001 replace the HCPL-4562-020E directly? A: Yes. The 6N136-X001 maintains identical 8-DIP (0.300", 7.62mm) package dimensions, single-channel transistor output with base, and 8mA output current. The higher 5300Vrms isolation rating provides additional margin. Pin compatibility requires verification against specific application schematics.

Q: What is the difference between PS8501-AX and PS8501L1-AX? A: Both are Renesas NEPOC series optoisolators with identical electrical specifications. The primary difference is package spacing: PS8501-AX uses 0.300" (7.62mm) pitch, while PS8501L1-AX uses 0.400" (10.16mm) pitch. PCB footprint compatibility must be confirmed before selection.

Q: Are the PS8501-V-AX and PS8501L1-V-AX suitable substitutes? A: Yes, both maintain electrical compatibility with the HCPL-4562-020E. The "-V-AX" suffix indicates high-speed optocoupler variants. Package spacing differs: PS8501-V-AX uses 0.300" pitch (direct replacement), while PS8501L1-V-AX uses 0.400" pitch (requires PCB verification).

Q: What is the maximum forward current difference between the HCPL-4562-020E and substitutes? A: The HCPL-4562-020E supports 12mA maximum DC forward current. All substitute parts support 25mA maximum DC forward current, providing higher input current capability without affecting output performance.

Q: Can I use SFH6136-X001 in place of HCPL-4562-020E? A: Yes. The SFH6136-X001 is a Vishay optoisolator with identical 8-DIP (0.300", 7.62mm) package, single-channel configuration, and 8mA output current. The 5300Vrms isolation and 25V output voltage rating exceed HCPL-4562-020E specifications. Pin-to-pin compatibility must be confirmed.

Q: Which substitute offers the fastest switching performance? A: The 6N136-X001 and SFH6136-X001 both specify 200ns turn-on and turn-off times. The PS8501 series specifies 220ns turn-on and 350ns turn-off times. Switching speed requirements should be evaluated against application timing constraints.

Q: Are all substitutes ROHS3 compliant? A: Yes. All substitute parts listed are ROHS3 compliant with MSL rating of 1 (Unlimited), matching the HCPL-4562-020E compliance profile.