HCPL-4200#500 Equivalent & Substitute Parts

Part Overview

The HCPL-4200#500 is an optoisolator current loop receiver designed for high-voltage isolation applications. This component provides 3750Vrms isolation with a single channel, DC input type, and 25mA output current capability. The part is discontinued at DiGi Electronics, making identification of active equivalent components essential for ongoing design support and procurement.

Substiute Parts

HCPL-4200#500

Broadcom LimitedIn Stock: 992HCPL-4200#500 Datasheet

Current PartRFQ

HCPL-4200-500E

Broadcom LimitedIn Stock: 5884HCPL-4200-500E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HCPL-4200#500 is determined by strict equivalence across all electrical and mechanical parameters. The primary substitute identified is the HCPL-4200-500E, which maintains identical specifications across the following critical parameters:

• Voltage isolation rating: 3750Vrms
• Single channel configuration
• DC input type
• Output current: 25mA per channel
• Common mode transient immunity: 1kV/µs minimum
• Propagation delay characteristics: 1.6µs (tpLH), 1µs (tpHL)
• Rise and fall time: 55ns, 15ns
• Supply voltage range: 4.5V ~ 20V
• Operating temperature range: -40°C ~ 85°C
• Package configuration: 8-SMD, Gull Wing
• Approval certifications: CSA, UR

The HCPL-4200-500E differs only in product status (Active vs. Discontinued) and RoHS compliance status, with no electrical or mechanical parameter variations.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-4200-500E is the direct functional equivalent of the HCPL-4200#500. Selection of the HCPL-4200-500E is supported by the following factors:

• Active product status ensures ongoing availability and supply chain continuity
• ROHS3 compliance provides regulatory alignment for new designs and procurement cycles
• Identical electrical performance across all specified parameters guarantees functional interchangeability
• Maintained certifications (CSA, UR) preserve compliance requirements
• Identical packaging and pinout eliminate redesign requirements

The HCPL-4200-500E is suitable for direct replacement in applications currently using the HCPL-4200#500.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-4200-500E be used as a direct replacement for the HCPL-4200#500?

A: Yes. The HCPL-4200-500E maintains identical electrical specifications, isolation voltage, channel configuration, timing characteristics, and package pinout. No circuit modifications are required.

Q: What is the difference between HCPL-4200#500 and HCPL-4200-500E?

A: The primary differences are product status and RoHS compliance. The HCPL-4200#500 is discontinued and RoHS non-compliant, while the HCPL-4200-500E is active and ROHS3 compliant. All electrical and mechanical parameters are identical.

Q: Are there any packaging differences between these parts?

A: No. Both parts use the same 8-SMD, Gull Wing package configuration with identical pinout and mechanical dimensions.

Q: Does the RoHS3 compliance of the HCPL-4200-500E affect circuit performance?

A: No. RoHS3 compliance reflects material composition standards and does not alter electrical performance, timing characteristics, or isolation specifications.

Q: What certifications apply to both parts?

A: Both the HCPL-4200#500 and HCPL-4200-500E carry CSA and UR approvals. Both are REACH Unaffected and classified as EAR99 for export control purposes.

Q: Is the HCPL-4200-500E available in the same packaging options?

A: The HCPL-4200-500E is available in Cut Tape (CT) and Digi-Reel packaging, providing standard procurement formats for production and prototyping applications.