HCPL-3180-560 Equivalent & Substitute Parts

Part Overview

The HCPL-3180-560 is a 2.5A gate driver optical coupler manufactured by Broadcom Limited, providing 3750Vrms isolation across a single channel in an 8-DIP gull wing surface mount package. This component is designed for high-voltage gate drive applications requiring galvanic isolation and fast switching characteristics.

The HCPL-3180-560 is currently discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for systems utilizing this optical isolation technology.

Substiute Parts

HCPL-3180-560

Broadcom LimitedIn Stock: 841HCPL-3180-560 Datasheet

Current PartRFQ

HCPL-3180-560E

Broadcom LimitedIn Stock: 939HCPL-3180-560E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HCPL-3180-560 is determined by strict equivalence across the following critical parameters:

• Isolation Voltage: 3750Vrms minimum
• Number of Channels: 1 channel
• Output Current Capability: 2A continuous, 2.5A peak
• Common Mode Transient Immunity: 10kV/µs minimum
• Propagation Delay: 200ns maximum (tpLH and tpHL)
• Pulse Width Distortion: 65ns maximum
• Package Type: 8-DIP gull wing surface mount
• Operating Temperature Range: -40°C to 100°C minimum
• Output Supply Voltage: 10V to 20V range

The HCPL-3180-560E is a direct equivalent from Broadcom Limited, differing only in packaging format (tape & reel versus bulk) and product status (active versus discontinued). All electrical and mechanical specifications remain identical.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-3180-560E is the primary substitute for the discontinued HCPL-3180-560. Both parts are manufactured by Broadcom Limited and maintain identical electrical and mechanical specifications across all critical parameters. The HCPL-3180-560E is currently in active production status with confirmed inventory availability.

The key distinction between these parts is product status and RoHS compliance. The HCPL-3180-560E achieves ROHS3 compliance, whereas the original HCPL-3180-560 is RoHS non-compliant. For applications subject to RoHS regulatory requirements, the HCPL-3180-560E is the appropriate selection. Both parts carry equivalent approval certifications (CSA, IEC/EN/DIN, UR) and maintain the same moisture sensitivity level (MSL 1 - Unlimited).

The packaging format differs between the two parts: the HCPL-3180-560 is supplied in bulk format, while the HCPL-3180-560E is supplied in tape & reel format. This distinction affects procurement and assembly processes but does not impact electrical performance or functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-3180-560E be used as a direct replacement for the HCPL-3180-560?

A: Yes. The HCPL-3180-560E is electrically and mechanically identical to the HCPL-3180-560 across all specified parameters. Both parts feature 3750Vrms isolation, 2.5A peak output current, 10kV/µs common mode transient immunity, and identical propagation delay and pulse width distortion characteristics. The primary difference is product status (active versus discontinued) and RoHS compliance level.

Q: What is the difference between the HCPL-3180-560 and HCPL-3180-560E?

A: The HCPL-3180-560E is the active production variant of the HCPL-3180-560. Electrical specifications are identical. The HCPL-3180-560E is ROHS3 compliant, while the HCPL-3180-560 is RoHS non-compliant. Packaging format also differs: the HCPL-3180-560 is supplied in bulk, while the HCPL-3180-560E is supplied in tape & reel format.

Q: Are there any compatibility concerns when substituting the HCPL-3180-560E for the HCPL-3180-560?

A: No compatibility concerns exist. Both parts share the same 8-DIP gull wing surface mount package, pinout, and electrical characteristics. PCB layout, footprint, and assembly processes remain unchanged. The tape & reel packaging of the HCPL-3180-560E may require adjustment to procurement and handling procedures but does not affect circuit performance.

Q: What certifications apply to both the HCPL-3180-560 and HCPL-3180-560E?

A: Both parts carry approval from CSA, IEC/EN/DIN, and UR agencies. These certifications confirm compliance with international safety and performance standards for optical isolation components.

Q: Is the HCPL-3180-560E suitable for applications requiring RoHS compliance?

A: Yes. The HCPL-3180-560E is ROHS3 compliant and is appropriate for applications subject to RoHS regulatory requirements. The original HCPL-3180-560 is RoHS non-compliant and may not be suitable for such applications.