HCPL-261N#500 Equivalent & Substitute Parts

Part Overview

The HCPL-261N#500 is a logic output optoisolator manufactured by Broadcom Limited, designed for high-speed digital isolation applications. It provides 3750Vrms isolation with open collector Schottky clamped output, supporting data rates up to 10MBd with 1kV/µs common mode transient immunity. The part is currently discontinued at DiGi Electronics, making equivalent substitutes necessary for ongoing production and maintenance applications.

Substiute Parts

HCPL-261N#500

Broadcom LimitedIn Stock: 925HCPL-261N#500 Datasheet

Current PartRFQ

HCPL-261N-500E

Broadcom LimitedIn Stock: 818HCPL-261N-500E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HCPL-261N#500 is determined by strict equivalence across the following critical parameters:

• Voltage isolation rating: 3750Vrms
• Common mode transient immunity: 1kV/µs minimum
• Output configuration: Open collector with Schottky clamping
• Data rate capability: 10MBd
• Single channel configuration
• Package type: 8-SMD Gull Wing
• Supply voltage range: 4.5V ~ 5.5V
• Operating temperature range: -40°C ~ 85°C

The HCPL-261N-500E is a direct substitute from the same manufacturer, maintaining identical electrical specifications and package configuration while offering active product status and improved compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-261N-500E is the primary substitute for the discontinued HCPL-261N#500. Both parts maintain identical electrical and mechanical specifications, ensuring direct functional compatibility. The HCPL-261N-500E offers the advantage of active product status, ensuring continued availability and supply chain reliability. Additionally, the HCPL-261N-500E achieves ROHS3 compliance, whereas the original part is RoHS non-compliant, making it suitable for applications subject to environmental regulations. The Tape & Reel packaging of the HCPL-261N-500E is standard for high-volume production environments.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-261N-500E be used as a direct replacement for the HCPL-261N#500?

A: Yes. The HCPL-261N-500E is electrically and mechanically identical to the HCPL-261N#500. All critical parameters including isolation voltage, CMTI, output configuration, data rate, timing specifications, and supply voltage are equivalent. The parts are pin-compatible and require no circuit modifications.

Q: What is the difference between the HCPL-261N#500 and HCPL-261N-500E?

A: The primary differences are product status and compliance. The HCPL-261N#500 is discontinued and RoHS non-compliant. The HCPL-261N-500E is an active product with ROHS3 compliance and is supplied in Tape & Reel packaging for production environments.

Q: Are there any package or pinout differences?

A: No. Both parts use the 8-SMD Gull Wing package with identical pinout and mechanical dimensions. They are fully interchangeable at the PCB assembly level.

Q: What is the significance of the Tape & Reel packaging?

A: Tape & Reel packaging is standard for automated surface mount assembly processes. It enables high-speed pick-and-place machine compatibility and is the preferred format for production volumes.

Q: Does the HCPL-261N-500E meet current environmental standards?

A: Yes. The HCPL-261N-500E is ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic components in most jurisdictions.